IPDB › China Industry › Manufacturing & Processing Machinery › Pre-Press Equipment
Factory Supply Easy Operate Small 60*60cm Manual Screen Mesh Stretching Machine1
Pre Press Equipment, Screen Mesh Stretching Machine, Manual Screen Mesh Stretching Machine
Dongguan Ruida Machinery and Equipment Co., Ltd.
Preview:
Product Description Factory Supply Easy Operate Small 60*60cm Manual Screen Mesh Stretching MachineScreen stretching is the most important procedure to make screen. Stretching tool and technical define the quality of emulsion coating ,screen stretching and screen printing.Our company R&D this manual screen stretcher, it is professional design, exquisite craft, brief and utility structure, easy and swift operation ,enormously improves efficiency and quality. It is exposed of four parts with the same appearances, structures and applications.SpecificationsCrate dimension: 28"*19"*11"(70×48×28CM)Net weight: 42Lb(19kg)Shipping weight: 50Lb(23kg)Operations 1. Put the screen frame on it, the upside must be the ragged face.2. Adjust the height of the frame, 0.04"-0.08"(1-2mm) higher than the baffle.3. Keeping the hand-wheel in the inside of the screw rod will assure better stretching effects.4. Coat screen adhesive, not to thin and not to thick.5. Stretch when the adhesive sticks hand a bit.6. Coat the adhesive again after well stretched.7. When the adhesive solidifies completely, then the screen stretching appliance can be dismantledMain FeaturesConsisted by four 24"(60CM) wide collets. One single set can apply to any screen frames below 24"x24"(60x60CM )(external dimension), two sets combination can be done all size screen frames below 48"x48"(120x120CM)Wide locking bars for compressing screen are critical parts, directly influencing the quality of stretching. We specially exploit concave and convex locking bars made of rubber with proper rigidity,24" width, no jointsSuits for any frames below 2" thickness (common thickness is 1"-1.2").Adjusting position bolt can meet your different requirementConsidering machine structure, only some components needs to endure force, we bring in 0.12" thickness steel plate to make normal components and 0.2" thickness plate to make forced parts.Made of steel,advanced electrostatic spraying Related Products
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.