IPDB › China Industry › Manufacturing & Processing Machinery › Pre-Press Equipment
Screen Burr Tension Foreign Objects Detecting Machine1
Pre Press Equipment, Screen Detecting Machine, Stencil Detecting Machine
Shenzhen Subit Technology Co., Ltd.
Preview:
Product Description EQUIPMENT APPLICATIONSemi-automatic stencil inspection equipment is a high-precision inspection equipment dedicated for cleaned stencil after printing. The main purpose is to control the quality of cleaned stencil. Utilizes the automatic image measurement technology to scan the standard stencil image and collects parameters such as tension, and then compares it with the cleaned stencil to determines whether the cleaned stencil is qualified within the set error range. At the same time, it automatically records and uploads the stencil cleaning inspection results to optimize the quality of the stencil and realize the automatic management of the information chain.This equipment makes up for the defects of low efficiency, poor quality, inability to manage and trace data, and inability to improve the process of manual inspection, and provides an important reference for the improvement and control of printing process. Product ParametersNO.TYPEITEMDESCRIPTION1BrandModel nameSBT-JC1009SA2Inspect Spec.PurposeClean effect inspect,foreign body inspect, tension test3TypesBlocking hole,foreign body,tension,glitch4Speed0.9second/FOV5Inspect AccuracyMeasure accuracy0.2MM6Position accuracyRepeatability accuracy 3~8%7Tension TestMulti position test freely;accuracy:±1N/cm,tension range:0~50N8Min. Inspection component80μm * 80μm9Optical SystemCamera 12millon10lens1/2" telecentric lens 12Top lightRed coaxial light13Bottom lightwhite LED light source14FOV 50mm*40mm15Stencil Spec.Stencil frameSupport 736*736*60cm below16Max.inspect range500*500mm17Equipment Spec.Appearance(L*W*H)1650*1400*1750mm18Weight800KG19Equipment frameStainless steel weld with painting20Drive systemServo motor+PLC21ComputerOperation SystemWindows 10 X64 professional Edition22Computer host,displayI7processor 32G memory+ 1TB hard disk drive / 24' LCD (1920X1080)23Template set up New TemplateStandard image template set up24Set up time2~5 minutes25SoftwareTest modeOff line testing26Template dataTransfer template image to process27User authorityDivide to operator and tester28QR code managementStandard QR code management function29SearchingThe Clean times and inspect time can be searched.30Equipment Use conditionVoltageAC 220V±10%(single phase), 50/60Hz31Air pressure0.08MP32Vibrationdoesn't effect inspect accuracy33ServiceWarranty period12 months for whole machine34Software upgrade servieLifelong free upgrade35Service support7x24,feedback within 8hours PRODUCT FEATURES1.The semi-automatic stencil inspection machine is an optical measuring device that uses automatic image recognition technology to collect parameters such as stencil images and tension, and compares them with the error range and reference value set in the program to determine whether the cleaned stencil meets the requirements. 2.The traditional manual inspection method cannot guarantee the accuracy of the inspection, cannot accurately measure and compare, and has no data record and analysis comparison. It is impossible to conduct accurate research on the impact of different stencil opening process treatments on quality during use; 3.Simple to operate and the inspection process is completed automatically, which not only greatly improves the inspection accuracy and speed, but also avoids human judgment factors, and provides direct and objective quantitative data for judging the quality of the stencil; 4.Mainly for the cleaned stencil after printed, measure and judge the correctness and rationality of the stencil, and monitor the quality of the stencil in use, discover quality problems in advance, and prevent batch process problems caused by stencil quality; 5.Automatic tension test and image record, save test reports, and monitor steel mesh accuracy changes; 6.Improve automated control capabilities, timely prevent, discover, and control quality and efficiency problems caused by steel mesh problems; 7.Improve steel mesh opening process, solve printing machine problems, and improve SPI inspection pass rate; 8.Record inspection data in detail, generate inspection reports, improve process analysis links, and provide support for production process improvement; Packaging & Shipping After Sales Service1)Machine warranty period: 12 month, factory would supply spare parts on free in warranty time.2) Technical supporting in lift time. Any problems happened, factory would response in 8hours via Email, instant message or phone directly.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.