IPDB › China Industry › Manufacturing & Processing Machinery › Spraying Machinery & Spreading Equipment
Small Roll to Roll Coater with Optional Coating1
Spraying Machinery Spreading Equipment, Powder Coating Equipment, Coating Machine
Zhengzhou CY Scientific Instrument Co., Ltd.
Preview:
Product Description Small Roll to Roll Coater with Optional Coating: Blade, Slot Die, Micro Gravure & CalendarProduct DescriptionThe film coater is a versatile R2R coating & calendering system which can adapt various coating heads such as doctor blade (reverse comma blade), slot die and micro gravure. Three types of film drying mechanisms include convection, infrared heating or uv curing can also be applied to it. This is the most complete and universal coating and calendering/laminating (optional) system that provides a broad adaptability to various coating slurries and film substrates (Cu, Al, PET, PP, PE).Doctor Blade: Cost effective solution for 10~200 micron thick coatingsMicro-Gravure: Perfectly suitable for precise thin coatings from 2~3 micronsSlot Die: Suitable for precision coatings as thin as 1 micron while providing a wide coverage for thinner coatings upto 200 micronsSmall Roll to Roll Coater specifications:Working Voltage208 - 240 VAC, 50/60 Hz, Single Phase Max. Power Consumption6 KW (50A Air breaker required)Compressed Air0.5-0.8 MPa is required (Air compressor not included. )Reeling/Unreeling Diameter250mm O.D Max. Coating Width1) Doctor Blade: 180mm; 2) Slot Die:150mm; 3) Micro-Gravure: 180mmCoating Heads (please select in the Product Options)Doctor BladeSlot DieMicro-GravureDoctor Blade Coating (Reverse Comma Blade) Two available coating modes (continuous and intermittent) selectable on the control panel.Coating thickness range: 10~200um ( dried film )Coating width and length: 180mm W x 5000mm L Max. (single side coating)Typical slurry viscosity range: 500~10000 mPa.sPrecision: ±5μmMSK-155 auto-slurry feeder with 2 liters tank is available at extra cost.Slot Die coating The slot die is perfect for uniform film coating of 1 micron and up to 300-micron thickness. By changing the shim size with various patterns, you would be able to produce continuous, intermittent, or even grid coatings that match the shim patterns. MSK-156 slurry feeding screw pump with 4 liters tank is included.Minimum thickness & precision: 1 μm (dried film), ±1% Coating width and length: 150mm W x 5000mm L Max. (single side coating)Typical slurry viscosity range: 200~10000 mPa.sAttention: The final coating thickness is dependent on a wide range of parameters such as slurry viscosity, solid particle size, solid content, shim thickness, foil rolling speed and slurry feeding rate. Therefore, we are not able to guarantee that 1-micron level film is achivable for all kinds of slurries. For further discussion, please let us know your slurry specs and coating thickness requirement.Micro-Gravure CoatingContinuous and intermittent coating mode are available for the user.Coating thickness range: 2~3um ( dried film )Coating width and length: 180mm W x 5000mm L Max. (single side coating)Typical slurry viscosity range: 30~2000 mPa.sMSK-155 auto-slurry feeder with 2 liters tank is included.Drying Mechanism (please select in the Product Options)Convection HeatingInfrared HeatingUV CuringConvection HeatingAir flow rate:3.3/2840 (cm3/min @ RPM ) max., flow rate adjustableDrying temperature: 150°C max.Power Consumption: 3KW max.Heater length: 500mmInfrared HeatingDrying temperature: 150°C max.Power Consumption: 2.1KW max.Heater length: 500mmUV CuringThe power and wavelength of the UV lamp can be customized according to customer's specific requirements.Heater length: 500mmProduct DimensionsL1260mm x W850mm x H1600mmNet Weight1000 kg (2200 lbs)WarrantyOne Year limited warranty with lifetime supportRusting and damage due to improper storage condition or maintenance are not covered by warrantySmall Roll to Roll Coater product details:Founded in 2005, Zhengzhou CY Scientific Instrument Co., Ltd. is a company specializing in the development and production of laboratory technology research equipment. The products are mixed, pressed, burned, cut, ground, polished, coated, analytical equipment and related consumables. Products include laboratory sintering equipment, coating equipment and so on. At present, it has been exported to 25 countries and regions such as the United States, Europe, and Southeast Asia, and has been well received by various scientific research units.We have a mature technology research and development team, the number of technicians is 33, the company has 150 people, more than 500 square meters of office space, the factory covers an area of about 1,500 square meters located in Zhengzhou High-tech Zone Electronic Industrial Park. The products are mainly located in the research market, serving scientific research in the labs of universities and colleges, and can also customize products according to your needs.Q. Are you a manufacturer or a trading company?A. We are professional laboratory instrument manufacturers, have their own design team and factory, have mature technical experience, and can guarantee the quality of products and the optimal price.Q. How is your company's product after-sales service system?A. The product warranty period is 12 months, we can provide lifetime maintenance. We have professional pre-sales and after-sales departments that can respond to you within 24 hours to resolve any technical issues.Q. How long is your delivery time? If I want to customize the instrument, how long does it take?A.1. If the goods are in stock, it is 5-10 days. 2. We can provide customized services for our customers. It usually takes 30-60 days depending on the specifications of the custom instrument.Q. Our country's power supply and plug are different. How do you solve it?A. We can supply a transformer and plug according to your local requirements according to the power plug of different countries.Q. How to pay?A.T / T, L / C, D / P, etc., it is recommended to use Trade Guarantee.Q. How is the package of goods? Delivery methods?A.1. Standard export fumigation sign wooden box packaging 2. Express, air, sea shipping according to customer requirements, find the most suitable way.More questions, please contact customer service
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.