IPDB › China Industry › Manufacturing & Processing Machinery › Spraying Machinery & Spreading Equipment
Factory Price Rust Removal Spray Deep Carving Craft Nozzle Metal Glass Surface Sandblasting Gun1
Spraying Machinery Spreading Equipment, Spray Gun, Sandblasting Gun
Jinan Junda Industrial Technology Co., Ltd.
Preview:
Product Description Deep carving craft nozzle metal glass surface sandblasting gunUpdate: September 30th Product DescriptionProduct applicationJD SG4-1 series pipeline in wall sandblaster is a special device supporting the use cost sandblasting equipment to clean the pipeline in wall. It can be used in manual work, also in automatic work if equipped with other devices. Applicable for the pretreatment before coating for pipeline inner wall within the inner diameter range 300mm-900mm in the oil, chemical, ship, etc. industries. Product Parameters Internal Pipe Sandblasting GunModelJDSG-4-1FuelElectricUseContainer / Bottle CleaningCleaning ProcessAbrasiveCleaning TypeHigh pressure cleanerApplicable IndustriesManufacturing Plant, Machinery Repair Shops, Retail, Construction works, Energy & MiningOuter Machine Dimension380X700mmMax. Abrasive Size2mmAir Consumption10 m3/minSuitable Pipeline Inner Wall Dia300mm-900mmWorking Pressure0.5-0.8mpaWeight(kg)28MaterialTungsten Carbide/Boron CarbideFeatures introducedThere are two sandblasting heads on the spray gun, with a pneumatic motor, which drives the two sandblasting heads to rotate 360degrees for sandblasting. The size of the pipe can be adjusted by adjusting the roller bracket on the spray gun. operate.Product features1. JD SG4-1 Sandblaster is commonly used as a supporting tool for other bigger sandblasting equipment toclean the inner wall of pipeline, and it could be operated manually or automatically.2. The working principle of JD SG 4-1 is changing the shooting angle of the abrasive stream by using acone shape blasting head or rotary blasting head to cleaning the inner wall of pipeline. The structure issimple and easy for maintenance.3. Driven by pneumatic motor, two nozzles rotating at the same time, sandblasting efficiency doubled.4. The major parts use the imported material, largely extending the machine lifetime and lowering downuse costs for customers.5. The cleanness level reaches Sa2.5-Sa3.Operating principle:When cleaning the inner wall of the pipe, it is necessary to configure a pressure feeding sandblasting machineand an air compressor with enough air volume. The sandblasting hose of the sandblasting machine isconnected with the inner wall cleaner of the pipe, and the manager is pushed into the top of the pipe toclean the work. The equipment is the use of sand blasting machine pressure sent out of the air abrasive mixed flow,spray to the pipe inner wall cleaner cone nozzle, so that the abrasive guide to form a cone shape diffusion,so as to impact the pipe inner wall, to achieve the purpose of pipe inner wall cleaning.Remark:1.JD SG4-1 series is a special supporting device for JD pressure sandblasting machine. 2. Adjust the degree of tightness of outer joint can in a way adjust the spinning speed of spinning nozzle holder.And the speed should be controlled within 30~500r/min.3.If spinning nozzle holder stops spinning or spinning too slowly, it may be because of under pressure,too tight outer joint, stuck bearings or jamed nozzle. Stop the machine, and then adjust and check. 4.Before working,pipeline in wall sandblaster should be put in the in wall from one side to another,and dry pressed air must be inlet. When working, blasting pipe should be pulled out slowly to makeit get out at a constant speed. If the cleaning quality can't meet the requirements, work again to get thesatisfactory effect.5.If the abrasives are blocked and can not be sprayed out, it should be closed down first and exhaust,then have a check. 6). Quick-wear parts should be checked regularly,they should be replaced timely if worn,or they would have a bad influence on the efficiency and the blasting quality,and maybe Exhaust bring accidentsPackaging & ShippingCompany ProfileJinan Junda Industrial Technology Co.,Ltd has provided sandblasting abrasives and sand blasting equipment,spray paint&coating equipment for Sand Blasting, Surface Preparation and Corrosion Control in many different industries since the 2005's including Oil & Gas, Mining, Structural Steel Fabrication, Water Infrastructure, Marine and Bridge Refurbishment work throughout all over the world with our main hubs in Jinan city, Shandong province, China.SANDBLASTING EQUIPMENT From sandblasting cabinet, sandblasting pots, sandblasting hoses and nozzles to air conditioner in helmet , spray tips and even work gloves, we offer a complete line of superior products to help professionals stay comfortable and safe .Our abrasive sandblasting equipment is backed by our quality guarantee and we also offer maintenance, repaid, OEM &ODM to ensure your tools and supplies last longer and stay run.CertificationsFAQQ. What is the mode of your payment?T/T: 50% advance payment and the rest 50% payment oay us when you get the scanned B/L from our E-mail.L/C:100% irrevocable L/C at sight.Q. What's the MOQ of your product?As usual MOQ is 1TONS.Or as your require, we need to calculate the new price to you.Q.Can you provide the free samoles?Yes, we can send free samples less than 500g to you. Normally, we can send samples to customer byexpress, such as DHL,TNT,Fedex,Aramex, etc.Q.What atandars you carring out for your products?SAE standard and ISO9001, SGS.Team service:Our team has high quality, prompt and patient service, patiently answer your questions about the product, and provide you with the most suitable purchase plan for you.If any need, please contact us any time!More details, please contact with JUNDA0086 15628820220
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.