IPDB › China Industry › Manufacturing & Processing Machinery › Wire Mesh
High Tensile Strength Landslide Barrier Rockfall Protection Netting Mesh Chain Link Netting Mesh1
Wire Mesh, High Tensile Strength Mesh, Rockfall Netting
Anping Longteng Metal Products Co., Ltd.
Preview:
Product Description Product Description Material: High carbon steel wire.Surface treatment: Hot dipped galvanized, zinc-aluminum coated.Zinc thickness: No less than 150 g/m2.Wire diameter: 3 mm, 4 mm.Mesh type: Rhomboid hole.Mesh size : 65 mm inscribed circle diameter.Tensile strength: Minimum 1770 MPa.Braking load of single wire: 12.5 kN.Mesh roll width: 1-3.5 m.Mesh roll length:10-30 m.Fitting : Steel anchor, claw type spike plate, soil or rock nails,clips, sewing rope, boundary rope. (The steel anchor is madeofdeformed steel bar of 25 mm diameter) High-tensile steel wire slope protection system rockfall netting meshComponents:The system consists of four main components that are carefully coordinated with each other.itemvaluePlace of OriginChina HebeiMaterialGalvanized Steel WireTypeChain Link MeshApplicationProtecting MeshWeave StylePlain WeaveTechniquewovenModel NumberLT- Slope protection meshBrand NameLongteng Slope protection meshProcessing ServiceCuttingDelivery Time8-14 daysMaterialZn-Al Alloy steel wireWire Tensile Strength1770N/mm2Mesh tensile strength150KN/mDiagonal8x14mmWire Diameter3mmMesh Width65mm1. Steel wire meshSteel wire mesh is made of high-tensile steel wire with an ultimate tensile strength of 1770 N/mm2.2. Spike PlatesRigid spike plates that are reinforced with ribbing ensure optimal load transmission from soil or rock anchors to the mesh.These plates are placed over the anchor heads and tightened to pre-tension the mesh onto the slope.The plates are galvanized and have dimensions of 13.0''*7.5"*0.4"(330mm*190mm*10mm).3. Connection clipsThe connection clips high-strength steel wire connection clips enable mesh sections to be joined without overlapping and still guarantee one hundred percent transfer of forces.These claw are hot dip galvanized and consist of 0.25"(6mm) thick steel spiral.4. Soil or rock nailsAdapted to the local soil and rock static requirements, the mesh can be anchored in accordance with our dimensioning concept with commercial soil or rock nails.The main anchors of the system are installed in a grid typically from 6.6 to 16.4 ft (2.0 to 5.0m)horizontal and vertical spacing.Actual spacing depends upon the results of site analysis and modeling.Anchor consist of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm).Selfdrilling grout injection anchors are also permitted.Additional anchors may also be used to provide added support at boundaries and in low points and hollows.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.