Rb441t Rb611t Wire Tw1061t¹

Product Description China TW1061T Tie Wire factory for RB441T, RB611T, RB443T, RB823T Rebar Tying Guns;Material: Galvanized Wire, Black Annealed Wire,Polyester Coated Wire, Stainless Steel. 1. Tie Wire 19 Gauge TW1061T Gauge:19 GaugeWire diameter: 1.0mm.Ties per Coil: 170-260Coil Length:215ft.Weight: 0.45kg30 spools/box.Model: 1.0mmBrand: Hang ShenHang Shen TW1061T ELECTRO-GALVANIZED BLACK ANNEALED PLASTIC COATED STAINLESS STEEL2.   TW1061T is used exclusively for tying rebar with a  RB441T, RB443T, RB823T.Double the speed, Cost savings, shorter tie Height, save time and tying wire length.Wire length: 33-34m double wire.Wire diameter: 1.0mm.Weight per roll: 0.45 kgs.Ties per Coil: 170-260It is ideal for precast or pre-stressed concrete used in marine or other harsh environment applications3.  TW1061T TIE WIRE SPECIFICATIONSModel No.:Galvanized Tie Wire 19 Gauge TW1061TDiameter:1.0MMLength:33-34m double wire.Net weight: 0.45kg/ reel  Material Code:Galvanized Wire, Black Annealed Wire,Polyester Coated WireStainless Steel WireApplicable machine:RB441T, RB443T, RB823TWraps per Tie: 1Tensile Strength:55,800-81,300(lb/in2)4. TIE WIRE MATERIAL:CarbonManganPhosphorusSulfur0.13-0.18%0.60-0.90%less than 0.03%less than 0.035%5. About our TW1061T Tie WireHang Shen rebar tie wire is made of the ideal grades of carbon steel and stainless steel to suit the environment they must endure.The rebar tie wire is drawn and dead soft annealed to create the greatest possible ductility which provides a tough but pliable wire which is easy to twist but hard to break.BLACK ANNEALEDThis low carbon steel, dead soft annealed wire is coated with a black oxide finish to provide a thin, mildly corrosion-resistant finish. This commonly used wire meets most construction, precast, and pre-stressed concrete industry applications.ELECTRO-GALVANIZEDThis low carbon steel, dead soft annealed wire is finished with a 5-micron zinc coating to provide greater corrosion resistance. It is ideal for precast or pre-stressed concrete used in marine or other harsh environment applications, or where length of service is important.PLASTIC COATEDThis low carbon steel, dead soft annealed wire is powder-coated with .05mm thickness of yellow polymer (polyester). It is used when tying epoxy coated rebar or other DOT mandated uses, or anywhere a cushioned wire with added protection against corrosion or abrasives is needed.STAINLESS STEEL This special stainless steel tie wire widely used for bridge or government building with Excellent rust resistance.6. Rebar Tie Wire TW1061T For Binding Machine RB441T, RB443T, RB823TWire Diameter 1.0MM.Also Called Double tie wire , and tying wire with two head.Advantage: Double the speed, Cost savings, shorter tie Height, save time and tying wire length.Faster, stronger, and easier to handle.It helps reduce costs and shortens the time required for construction.The wire height has been reduced by 50%.7. Rebar Tie Wire - 21 Gauge Galvanized, Annealed, PC Coated, Stainless SteelModel No.:Rebar Tying Wire Spool for Rb 397 398 399Diameter:0.8MMLength:100MNet weight: 0.4kg/ reel  Material Code:Q195Applicable machine:RB392,395,397 ,213,398...Wire Tensile Strength420m/PaWire Yield Strength:330m/PaResistance against rust:It should be no rust by 4cycles times under instructed test conditionsTensile Strength:42-47 KG/CM2Elongation:21%Wire length for one knot:50-40cm.One reel can tie 120 to 190knots 8. TW1525 Tie Wire for RB655 Rebar TyingTools9. 1.0MM TIE WIRE FOR OTHER BRAND REBAR TIERCHINA FACTORY OF TIE WIREATT.:JESSICA WANG  

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.