IPDB › China Industry › Industrial Equipment & Components › Pump & Vacuum Equipment
Grundfos TPE3 100-180 Industrial Electric Single Stage Vertical Water Pump for Industrial Water Supply Centrifugal Pump1
Pump Vacuum Equipment, Grundfos Water Pump, Centrifugal Pump
Tianjin Shiny-Metals Technology Co., Ltd.
Preview:
Product Description TPE3 100-180 S-A-F-A-BQQE-IWBA close-coupled single-stage volute pump with coaxial suction and discharge ports of the same diameter. The water pump has an upper pull-out design. For example, the power head (motor, pump head and impeller) can be disassembled for maintenance while the pump casing remains connected to the pipeline. The shaft seal complies with the DIN EN 12756 standard. The connection of the pipeline is achieved through PN 16 DIN flanges (in accordance with the EN 1092-2 and ISO 7005-2 standards). An air-cooled permanent magnet synchronous motor is installed on the water pump. According to the IEC 60034-30-2 standard, the energy efficiency of this motor is at the IE5 level. A frequency converter and a PI controller are included in the terminal box of the motor. This enables the system to continuously adjust the rotational speed of the motor, allowing the water pump to be adjusted to the optimal operating state according to the environmental conditions. A combined temperature and differential pressure sensor is installed on the water pump.Single-stage Pipeline PumpTPE3 100-180 S-A-F-A-BQQE-IWBItem number 93148709 ApplicationsCommercial HeatingCommercial Air ConditioningDistrict HeatingDistrict CoolingHeatingRefrigerationDesalinationDrinking Water TreatmentMunicipal Water Transmission and DistributionIrrigationWater Supply for Residential Communities and BuildingsShut-offSingle-stage Pipeline Pump equipped with MGE motor Controller:Frequency converter: Built-in Liquid:Conveyed liquid: WaterLiquid temperature range: -25.. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m3 Technology:Pump speed on which the pump data is based: 3890 revolutions per minuteRated flow rate: 50.8 m3/hRated head: 12.6 metersActual impeller diameter: 90 mmMain shaft seal: BQQEShaft seal code: BQQECurve tolerance: ISO9906:2012 3B2 Materials:Pump casing: Cast ironPump housing: EN-GJL-250Pump casing: ASTM class 35Impeller: CompositePES+30% GF Installation:Ambient temperature range: -20.. 50 °CMaximum operating pressure: 16 barMaximum pressure at the specified temperature: 16 bar / 120 °CPipe connection standard: EN 1092-2Interface type: DINConnection size: DN 100Pressure rating for pipe connection: PN 16Length between ports: 450 mmFlange size for motor: 56C Electrical data:Motor model: 90LDRated power--P2: 2.2 kWPower supply frequency: 50 HzRated voltage: 3 x 380-500 VRated current: 4.15-3.4 ACos phi--Power factor: 0.93-0.87Rated speed: 360-4000 revolutions per minuteIE efficiency class: IE5Motor full load efficiency: 90.1 %Number of motor poles: 0Enclosure class (IEC 34-5): IP55Insulation class (IEC 85): FMotor item number: 93113884 Others:Minimum efficiency index, MEI ≥: 0.70Net weight: 42.8 kgGross weight: 51.6 kgTransport volume: 0.164 m3
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.