IPDB › China Industry › Industrial Equipment & Components › Valve
Factory High Pressure Cryogenic Wcb Swing Lift Weld Stop Pressure Relief/Gate/Globe/Ball/Butterfly/Control/Check Valve for Low Temperature Industrial Use1
Valve, Valve, Check Valve
YOONAD VALVE (WUXI) CO., LTD.
Preview:
Product Description YOONAD Valves offers customized services for all valve series, such as ball valve, globe valve, check valve, gate valve, butterfly valve, safety valve, control valve, etc.The following is the detailed description of cryogenic check valve. If you have any need about other valves, please check the homepage of YOONAD Valve and feel free to contact me anytime.Cryogenic valves are used to control the flow of fluid through piping. They are often called "cryo" valves because they operate at shallow temperatures below -100°C (-212°F), which allows for greater control over the system's operation.They are relatively inexpensive compared to other types. They require no special tools to install. But if in case you are not cautious, they can be hazardous. This is because they can leak liquid nitrogen into the atmosphere and thus pose an inhalation hazard. On the other hand, they can precisely control fluid flow through the pipeline by using a valve sensitive enough to detect small amounts of pressure on its surface. And there are no disadvantages associated with this type of valve if it is used.Suitable for low-temperature scenarios below -100oC, such as liquid nitrogen transportation, etc.Reduced maintenance.Reduced installation costs.Improved efficiency, energy, and emissions reduction.Reduced noise and vibration levels in the compressor room can be a problem for some installations.Check valves are very flow-sensitive, which means they open and close based on the flow of the line fluid. The interior disc enables which helps to flow forward, allowing the valve to open. Based on the design, the disc starts shutting the valve when forward flow diminishes or reverses. Check valves are very flow-sensitive, which means they open and close based on the flow of the line fluid. The interior disc enables which helps to flow forward, allowing the valve to open. Based on the design, the disc starts shutting the valve when forward flow diminishes or reverses. The body, seat, disc, and cover are usually the only parts that need to be assembled. Other components may include a stem, hinge pin, disc arm, spring, ball, elastomer, and bearings, depending on the design.In pipes and similar devices and equipment, check valves are generally used to prevent a reverse flow by allowing materials or fluids to flow in only one direction. Despite their various forms, sizes, and functions, these valves generally operate based on the same principle. The primary components of a check valve include the Body,Body Seats,Gasket,Cover Plate,Hinge,Nuts,Washer. Type 05411 - Standard designTechnical dataNominal sizeDN1020324050Dimension code.X.100200320400500Face-to-face dimensionFF6085115140160HeightH7172879595Union threadGWM26x1.5M40x2.0M55x2.0M65x2.0M78x2.0Thread lengthb711141720Weightca. kg0.71.32.43.95.7Kvs-Valuem3/h2.26.712.122.637.1Cv-Valuegal/min2.67.814.126.343.2
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.