IPDB › China Industry › Industrial Equipment & Components › Valve
Special Float Ball Valve for Water Tank and Water Tower DN25 Automatic Water Level Control Valve for Automatic Stop When Water Is Full1
Valve, Water Tank Float Valve, Float Valve for Water
Changsha Lingbo Environmental Protection Technology Co., Ltd.
Preview:
Product Description Product DescriptionA liquid level valve is a device used to control the height and flow rate of a liquid. The following is a detailed description of the liquid level valve:DefinitionA liquid level valve, also known as a liquid level control valve or hydraulic control valve, is a valve that can automatically control the liquid level height of containers such as water tanks and towers. It detects the liquid level height through sensors and controls the opening and closing of valves through control devices, thereby achieving precise control of liquid flow and level.Working principleThe working principle of the liquid level valve is mainly based on the following methods:1. Float ball type: The valve is controlled by the up and down movement of the float ball. When the liquid level rises, the float rises and pushes the valve to close; When the liquid level drops, the float drops and the valve opens.2. Electrode type: The liquid level height is detected by the change in capacitance between the electrode and the liquid level. When the liquid level changes, the capacitance between the electrodes will also change accordingly, triggering the action of the control device and controlling the opening and closing of the valve.3. Ultrasonic type: uses the reflection principle of ultrasonic waves to detect liquid level height. The ultrasonic sensor emits ultrasonic waves, which reflect back upon encountering the liquid level. The liquid level height is determined by calculating the time difference between the emission and reception of ultrasonic waves, and the valve is controlled to open and close.4. Differential pressure type: The opening and closing of the valve is controlled by the static pressure difference of the liquid. When the liquid level changes, the static pressure of the liquid will also change accordingly, triggering the action of the control device.Automatically boil water when there is no water availableWhen the water level of the water tower drops, the float inside the valve sinks,Drive the lever to open the pilot hole of the valve body,Under the action of water pressure,When the sealing surface of the control valve is opened, water flows out from the control valve Selected PA66 nylon materialEnvironmentally friendly materials, products do not release harmful substancesExquisite and smooth appearanceHigh temperature and high pressure resistance 304 stainless steel fastening screwStainless steel fastening screws do not rust,Will not cause secondary damage to drinking water due to rustingAutomatically boil water when there is no water availableWhen the water level of the water tower drops, the float inside the valve sinks and drives the lever to open the pilot hole of the valve body. Under the action of water pressure, the sealing surface of the control valve opens, and water flows out from the control valveDetailed Photos Product ParametersInternal installation - side inlet water 4 Responsibilities 6 Responsibilities 1-inch tubeInternal installation - upper water inlet 4 Responsibilities 6 Responsibilities 1-inch tubeExternal installation - side inlet water 4 Responsibilities 6 Responsibilities 1-inch tubeExternal installation - water inlet on top 4 Responsibilities 6 Responsibilities 1-inch tube Installation InstructionsInstallation steps for exterior design Align the water inlet with the Align the hose with the water Align the other side of the hose joint and tighten it tank connector and tighten it Screw inlet under float valve Aim the hose at the other side Check that all threaded ports are not aligned Tighten the water inlet Tighten, installation completed Working principle of float valveWhen the water level in the water tower drops, the floating ball falls and uses the pressure of the water in the pipe to open the sealing silicone surface plunger in the valve body, and the valve body opens for water supply; When the water level in the water tower rises, the float rises, the connecting rod drives the plunger, the silicone gel seals the inlet hole, and the valve body stops supplying waterprecautionsprecautions1. Water pressure value: minimum water pressure of 0.2kg, maximum water pressure of 10kg.2. This product should be installed vertically on a horizontal surface.3. This product belongs to the liquid level control valve, and the float ball must be installed during installationMust be vertically downward.4. First, fix the inlet pipe on a horizontal surface, and then connect this valve to the inlet pipe according to its specifications. The main inlet pipe should be compatible with the nominal diameter of this valve.5.When in use, all shut-off valves in front of this valve should be fully opened.6.If two valves are installed in the same pool, they should be kept on the same horizontal plane.7.Before installing this valve, be sure to flush out any impurities in the pipeline.8.When using the interior product, there may be water droplets at the bottom, which is a normal phenomenon.Maintenance and upkeepWhen the water quality cleanliness is poor and there are many impurities in this valve, appropriate maintenance is required. When the user finds that the water addition time is prolonged, they can remove the control valve from the inlet pipe and clean the filter screen.Packaging & Shippingproduct namefloat valvespecifications6 points, 4 points, 1 inchSingle packaging box size11*6*9Carton size100 pieces/ 57 * 32 * 37.5Company ProfileCompany IntroductionChangsha Lingbo Environmental Protection Technology Co., Ltd. is a high-tech enterprise focusing on water treatment accessories. Its main products include RO membranes, ultrafiltration membranes, filter cloths, filter bags, filter elements, water tanks, dosing pumps, metering pumps, and pharmaceuticals, which are widely used in new energy, microelectronics, petrochemicals, medical, pharmaceutical, food and beverage, water treatment, and automobile manufacturing. We are able to provide RO systems and various water treatment products for residential, commercial, and industrial components. We not only focus on the quality and performance of our products, but we continue to research and innovate to provide more efficient, energy-saving, and environmentally friendly products and solutions for global customers. FAQQ1:Are you a manufacturer?A:we are both the factory and trade company.Q2:What is the price of the product?A: Our prices are based on the size and type of material, if you can give me the information, then we can give you an estimated price is for reference only. We can customize if need.Q3:What about the warranty?A: Normally it is guaranteed for 12 months since dispatching from factory.Q4:What's your delivery date?A: It depends on the quantity of orders. Delivery date is 7-30 days. If you need emergency products, we can speed up the production of the first arrangement.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.