IPDB › China Industry › Industrial Equipment & Components › Cleaning Machine
Surface Cleaning Wire Rod Coil Shot Blasting Machine for Rust Removal1
Cleaning Machine, Wire Rod Shot Blasting Machine, Single Wire Shot Blasting Machine
Qingdao KEEJOO Group
Preview:
Product Description Surface Cleaning Wire Rod Coil Shot Blasting Machine For Rust Removal of Knnjoo1.The application of this machine:This shot blasting machine is suitable for remove rust and clean the surface of wire rods.Using blast wheel / turbine which is produced by advanced technology throwing four shares beam to hit the fast-moving wire circumferential and it can removal on the layer of rust and oxide, and thus obtain clean metal surface, metal products manufacturing use this machine and benefits are as follows:Remove rust and oxide layer on the surface of the wire.After blasting, wire rod surface presents a uniform roughness, which will help to increase the adhesion of the aluminum clad copper clad, cladding uniform will never fall off.Eliminate the internal stress generated in the wire drawing process.Increasing the wire surface tensile strength and resistance to stress corrosion cracking, permanent life. The machine is best suitable models for wire surface oxide skin treatment.1)Single Wire Shot Blasting Machine:2)Coil WireShotBlastingMachine:2.The characteristics of the machine:1.Efficiency is high, after blasting the wire surface is clean, shows metallic color.2.The blast wheel is equipped with special shape of blade, concentrated blasting and the shots are density and improve productivity.3.The wire is spaced by oriented spacing , so it can control the swing of the wire being cleaned and reach the cleaning purpose.4.It adopts many domestic and foreign advanced technology, technical content of functional components are increased so that the machine runs low fault rate, high rate of boot. The sealing effect is good, reach to purify the environment index requirements of environmental protection.We will recommend you the right machine according to the workpiece and your requirement.3.Technical data Diameter of the wiremmΦ 4~Φ 40mm Inner diameter of the wire rodmmΦ 800-1100mm Outer diameter of the wire rod mmΦ1200-1400mm Height of wire rodmm2500mm Maximum loadkg2500kg4.Trade Term: Payment term: 30% as deposit, 70% balance against the copy of B/LDelivery of the goods is executed within 45 days after receipt of advance payment.Manufacturer must provide the certificate of origin to buyer.Our machines were exported to France, Spain ,Russia, Mexico , Japan,korean, Pakistan,Vietnam,Thailand,Southeast Asia and other countries , so hope you can trust our professional technology and strength !5.Quality and After-sale Assurance:1. Supplier promise the name, model, specification and quantity comply with technical protocol,assuring the machine is new equipment with qualified material manufactured through perfect technology.There are no defects in design, material and technologies, which is suitable for propose of demander,and meets the standard of national industry. The quality is stable and reliable.2. Equipment warranty and After-sale Assurance Engineers available to service machinery overseas( except force majeure, inappropriate operation and the quick-wear parts wears).3. The equipment will pass the installment and test before delivery, after the quality is qualified,we will disassembly the equipment, coating and deliver.In order to give you the suitable machine , pls provide below message for us :1. What is your workpiece and the material and the shape ?2.The Max. Length/Width/Height of the workpiece and the MAX./MIN.weight of your workpiece ?3.The productity you need to blasting the workpiece ( how many T or piece per day or per month?)4. The power supply you need( Our China :380V, 3PH, 50HZ) 5. Better to send us the workpiece photo or drawing.FAQWhat is a shot blast machine?A shot blaster is a machine that controls the flow or stream of fine metal beads as they are forcibly projected against a surface by mechanical acceleration.What material is used for shot blasting?Types of metal abrasives used in shot blasting include steel grit, copper shots, and aluminum pellets. Other methods of shot blasting use silica sand, glass beads, synthetic materials like sodium bicarbonate (baking soda), and even agricultural materials like crushed kernels.Will shot blasting remove rust?Shot blasting is the process of abrading the surface of a metal workpiece to remove rust, dirt and other solidified contaminants by hurling a high speed stream of tiny pieces of stainless steel that resemble buckshot. It is capable of deburring, shaping and texturing a surface.What is the difference between sandblasting and shot blasting?Essentially, the sandblasting process uses compressed air to shoot some form of abrasive media like sand against the product being treated. Shotblasting employs centrifugal force from a mechanical device to propel treatment media upon the product.Welcome contact me or visit our factory in Qingdao China.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.