IPDB › China Industry › Industrial Equipment & Components › Industrial Adhesive Products
Factory Direct Aluminum Foil Butyl Waterproof Anticorrosive Tape1
Industrial Adhesive Products, Industrial Tape, Aluminum Tape
Huaian Construction New Material CO., LTD.
Preview:
Product Description Huaian Construction New Material -- The anti-corrosion materials expert at your side <All products in this shop are manufacturer's supply, can take samples for free!>Aluminum foil anticorrosive tape, also known as aluminum foil anticorrosive adhesive tape, aluminum foil adhesive tape, also known as butyl aluminum foil tape, is an environmentally friendly sealing adhesive tape with strong ultraviolet resistance. The use of high quality pressure sensitive adhesive, good viscosity, strong adhesion, anti-aging and other effects. The insulation performance is greatly improved, and the specifications are (0.05mm-0.08mm) various widths and lengths. Aluminum foil anticorrosive tape with all aluminum foil composite material joint adhesion, insulation nail puncture sealing and repair of damage. It is the main raw and auxiliary materials of refrigerators and freezers, and it is also the raw materials that must be purchased by the distribution department of thermal insulation materials. Widely used in refrigerator, air conditioning, automobile, petrochemical, bridge, hotel, electronics and other industries.Aluminum foil anticorrosive tape function:The purity is higher than 99.95%, and its function is to eliminate electromagnetic (EMI) interference, isolate the harm of electromagnetic waves to the human body, and avoid affecting the function without voltage and current. In addition, it has a good effect on electrostatic discharge after grounding. The material is multi-ester fiber, which is not easy to crack and damage after repeated use or multiple bending. Strong adhesive force, good electrical conductivity, can easily wrap on the wire, can be cut into various specifications according to customer requirements.The aluminum foil anticorrosive tape produced by our company is made of aluminum-plastic composite foil substrate with excellent sunlight reflection, ultraviolet resistance and smooth flexible appearance and corrosion-resistant polyisobutylene modified butyl rubber as adhesive. It is covered with a layer of anti-stick isolation film through thermal composite technology. Aluminum foil adhesive tape is mainly used in petroleum, natural gas, chemical, pharmaceutical, thermal, power plants and civil construction industries, for the ground steel pipeline, component corrosion prevention and color steel tile, sun room and solar panel joint waterproof to provide ideal sealing protection and modification effect.The butyl aluminum foil tape made by our company has been verified by more than ten years of application and is a kind of excellent and trustworthy adhesive tape. All performance indicators ** meet the requirements of petrochina natural gas SY/T 0414-2017 standard. Is the current domestic aluminum foil adhesive tape strength manufacturers.Aluminum foil anticorrosive tape product advantages:1. Excellent mechanical properties: high tensile strength, good elasticity and extension properties, and strong adaptability to interface deformation and cracking.2, stable chemical properties: with excellent chemical resistance, weather resistance and corrosion resistance.3, reliable application performance: its cohesiveness, water resistance, sealing, low temperature resistance and good following, good dimensional stability, long-term no sliding, no falling off.4, lifelong resistance to ultraviolet rays, not curing to maintain flexibility, suitable for a wide surface, beautiful appearance.5, the use of no heating, flexible operation, simple and convenient.Product PropertiesTypical Value ZM-T700Total Thickness1.20 mmFoil Thickness0.07 mmAdhesive Thickness1.13 mmWidth Range50 mm-900 mmLength Range10-100 mBreaking Strength>50N /cmAdhesion Strength(90 degree)>12 N/cmAdhesion strength (180 degree)>15 N/cmAdhesion toMetal , Concrete, Brick, Slate, Tile, Painted Wood, and Rigid PlasticsDrop Down at 85oCNo drippingFlexibility at -20oCExcellentUV ResistantExcellentWater Vapor Transmission Rate0.2g/m2Specific Gravity1.5g/cm3Temperature Range For Application For Service5oC -50oCAluminum foil anticorrosive tape Supply information: 1. Color: silver white 2. Applicable pipe diameter: 15 ~ 1200mm 3. Tape width: 50~300mm 4. Film length: 10~20m 5. Core size: 38mm, 76mm paper core or hard plastic core 6. Packing: carton 7. Can be customized processing1.Preparation Tape must only be applied to clean dry surfaces.Remove all loose dust and dirt with a wire brush and soft broom from the area of application. 2.Application a.)Measure length of aluminum foil butyl rubber tape required and cut from the roll.b.)Peel a short length (about 4 inches) of the release film from one end of the length of tape.c.)Position this end (compound side down) onto the dry primed surface and press down firmly with hand or roller.d.)Ensure the tape is evenly pressed down avoiding creases or air pockets.It is very important to press down the edges and ends of the tape.e.)Continue along the length of tape peeling off approximately 8 to 12 inches of release film as application proceeds.It is recommended that only short lengths of release film are removed at any time to avoid contamination of the compound with dirt and dust. It can be used for Doors & Windows , Roof Patch ,Gutter Patch, Skylights, Valley Repair ,Metal Patch Metal Roofs, Flat Roofs, Trucks, RV's ,Mobile Homes, Trailers.Company ProfileHuaian Construction New Material CO.,LTD is a supplier of structural reinforcement, leakage repair and Anticorrosion for industrial and industrial pipelines, and provides waterproof materials for swimming pools, floors and other buildings.Has 15 own patents and declares high-tech enterprises. And participates in many large foreign trade fairs every year. It can provide real third-party inspection reports and maintain cooperation with many large engineering companies around the world.FAQ1. Manufactureror Trading CompanyWe are manufacturer, located in Jiangsu ,China2. Trade TermFOB, CIP, CIF, C&F, EXW, FCA 3. Minimum OrderThe minimum order is 3000 rolls. 4. Payment TermsT/T (Telegraphic Transfer) , L/C at sight, Western Union 5. Estimated Time of DeliveryBased on order quantity:Less than 5 tons, around 7-10 days.5 - 10 tons, around 10-12 days10- 20 tons, around 12 --15 daysMore than 20 tons, depend on the agreement between two parties. 6. Free sampleThe sample will be free , but the freight charge will be paid by buyer. 7. Logistics shipmentWe can delivery the product by sea, truck, train, air, express delivery. 8. After-sales service.1). Quality response2). Providing technical proposal and field application training
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.