CIPDB › China Industry › Industrial Equipment & Components › Boiler & Furnace
Industrial and Commercial Low-Noise Intelligent Control Safe Water-Cooled Low-Nitrogen Vacuum Phase Change Gas Boiler for Hospitals/Hotels/Apartments1
Boiler FurnaceBoilerWater Boiler
Shandong Aikeduo Heat Energy Technology Co., Ltd.
Preview:
Product DescriptionProduct DescriptionRelevant DefinitionsPhase Change Boilers: Boilers where, under the condition that there is no non-condensable gas in the boiler (boiler body) or the partial pressure of non-condensable gas (absolute pressure) is close to zero, the internal medium continuously transfers absorbed heat to the output working medium (e.g., water) in the heat exchange tube through a gas-liquid two-phase cycle of continuous evaporation and condensation.Types of Phase Change Boilers:Vacuum Phase Change Boilers: Phase change boilers where the rated steam pressure of the internal medium is lower than local atmospheric pressure (gauge pressure < 0MPa).Low-Pressure Phase Change Boilers: Phase change boilers where the rated steam pressure of the internal medium is higher than local atmospheric pressure but less than 0.1MPa (gauge pressure < 0.1MPa).Pressure Phase Change Boilers: Phase change boilers where the rated steam pressure of the internal medium is ≥ 0.1MPa.Working Principle:A vacuum hot water unit operates based on the principle that water boils to produce steam at low temperatures under low pressure, and heat is transferred through steam-water condensation. The internal closed chamber of the unit is evacuated to form a vacuum cavity. Combustion causes the heat-transfer water in the vacuum cavity to boil and vaporize, generating negative-pressure water vapor. The steam condenses outside the heat exchanger tubes, heating the cold water inside the tubes and delivering it to users. After condensation, the water vapor forms droplets that flow back into the heat-transfer water to be reheated and vaporized, completing the entire cycle. The boiler water continuously undergoes a phase change of "vaporization → liquefaction" within the closed boiler body and heat exchanger, known as phase transformation, while simultaneously cycling through "heat absorption → heat release" to heat the water in the heat exchanger.Heat-Transfer Water:It circulates closed within the unit (vaporization → condensation → vaporization), with no increase or decrease in quantity. It does not need to be replaced during the normal service life of the unit.The characteristics of the burner1. The air and gas are fully premixed in advance, resulting in high combustion efficiency.2. It is equipped with a variable - frequency fan, enabling stepless speed adjustment. The power can be adjusted as needed, reducing the number of boiler start - stops.3. The water - cooled combustion method reduces the flame temperature, achieving ultra - low emissions (nitrogen oxides < 15mg/m3).4. It has a lower air coefficient and a constant air - fuel ratio. Compared with diffusion combustion, it has higher efficiency under low - load conditions.5. Compared with metal fiber burner heads, it has larger apertures and is less prone to blockage. Features of Fully Premixed Water-Cooled BurnersWater-cooled Combustion Principle: By cooling the burner head with water to lower the flame temperature, this principle inhibits the formation of nitrogen oxides, achieving low NOx emissions. Structurally, it prevents the risk of flashback and can further reduce oxygen content to improve efficiency. Advantages of Water-Cooled Low NOx Burners: Compared with metal fiber burner heads, they have larger apertures, are less prone to blockage, offer wider adaptability, and require extremely low maintenance frequency, making them more suitable for domestic use environments.Boiler BodyThe main body of the vacuum hot water boiler is divided into two parts:the upper and lower sections. Upper Section (Condensation Chamber/Negative Pressure Steam Chamber): Contains a tubular steam-water heat exchanger, which heats the circulating water flowing through the heat exchanger.Lower Section: Adopts a unidirectional flow structure to transfer the heat of high-temperature flue gas to the boiler water.Introduction to Key ComponentsElectrical control box:Integrally control the operation of the boiler and check the boiler status.Vacuum pump:Compact appearance,smaller and lighter integral cylinder structure, high precision and more stable performance.Condensation chamber:High-temperature steam condenses on the surface of the tube bundle, releasing heat that is transferred to the circulating water. A built-in phase-change heat exchanger is included, eliminating the need for installing a plate heat exchanger.One unit can be configured with multiple groups of heat exchangers to simplify the system and save investment.Mixer:Mixing air and gas in advance results in higher combustion efficiency.Variable frequency fan:It realizes stepless speed regulation, adjusts power on demand, and reduces the number of boiler start-stops.Condenser:Reduce flue gas temperature and release latent heat, Improve the overall efficiency of the unit and significantly save energy consumption.Water-cooled low-nitrogen burner:Reduce flame temperature,High-performance combustion improves combustion efficiency,Ultra-low nitrogen oxide emissions, low-nitrogen and environmentally friendly.Heat exchanger:Tube - type structure with small water capacity enables faster start - up. Unidirectional flow structure makes it difficult for natural gas to accumulate in the furnace body, ensuring high safety.Condensing typeNon-condensing typeSpecificationModel (Condensing Type)Rated Heat Input (Mw)Gas Supply Pressure (12T)/KPaMaximum Gas Flow (Nm3/h)Electrical Power (w)Water Capacity (kg)Reference Heating Area (m2)Gas Pipeline Diameter (mm)Flue Pipe Diameter (mm)Operating Weight (Approx.) TYHZQ-L-350KW0.353---53510003432900--10000DN32φ2001.65YHZQ-L-700KW0.73---57017005375800--20000DN40φ2502.5YHZQ-L-1050KW1.053---510531007368700-30000DN50φ3153.2YHZQ-L-1400KW1.43---5140360088212000--40000DN50φ3153.7YHZQ-L-2100KW2.115---202108000121417000-60000DN50φ4506.2YHZQ-L-2800KW2.815---2028011500156323000-80000DN65φ5007.3YHZQ-L-4200KW4.215---2042015500225834000--120000DN65φ60010.5YHZQ-L-5600KW5.615---2056022500291446000-160000DN80φ70013.5YHZQ-L-7000KW7.015---2070030500357058000-200000DN100φ80016.5YHZQ-L-10500KW10.515---20105045600530090000-300000DN125φ100024.5YHZQ-L-14000KW14.015---201400557007030120000-400000DN150φ120032.5YHZQ-L-28000KW28.015---2028009070014280240000-800000DN200φ140052.1Model (Non-condensing Type)Rated Heat Input (Mw)Gas Supply Pressure (12T)/KPaMaximum Gas Flow (Nm3/h)Electrical Power (w)Water Capacity (kg)Reference Heating Area (m2)Gas Pipeline Diameter (mm)Flue Pipe Diameter (mm)Operating Weight (Approx.) TYHZQ-350KW0.353---53510003432900-10000DN32φ2001.54YHZQ-700KW0.73---57017005375800-20000DN40φ2502.3YHZQ-1050KW1.053---510531007368700-30000DN50φ3153YHZQ-1400KW1.43---5140360088212000-40000DN50φ3153.3YHZQ-2100KW2.115---202108000121417000-60000DN50φ4505.7YHZQ-2800KW2.815---2028011500156323000-80000DN65φ5006.8YHZQ-4200KW4.215---2042015500225834000-120000DN65φ60010YHZQ-5600KW5.615---2056022500291446000-160000DN80φ70012.8YHZQ-7000KW7.015---2070030500357058000-200000DN100φ80015.5YHZQ-10500KW10.515---20105045600530090000-300000DN125φ100023YHZQ-14000KW14.015---201400557007030120000-400000DN150φ120030.5YHZQ-28000KW28.015---2028009070014280240000-800000DN200φ140048.5Company ProfileShandong Aike Duo Thermal Energy Technology Co., Ltd. was founded in 2008 and is located at the foot of the majestic Mount Tai. It is a leading integrated gas heating service provider in China. For more than a decade, "Aike Duo" has always adhered to the corporate vision of "building the first brand of gas heating in China and becoming the best clean heating supplier in China", and is committed to the research and production of "gas heating equipment" as well as the promotion and implementation of "distributed clean heating" solutions. Through years of sharpening, Aike Duo has always moved forward with honors and has now grown into a "national high - tech enterprise" integrating production, research, and sales. It has multiple automated production lines and inspection lines, and has transformed into an automated digital factory. The production capacity of gas wall - hung boilers exceeds 600,000 units, and the annual production capacity of various types of industrial and commercial gas boilers is 10,000 units. It is the largest distributed gas heating equipment production base in northern China. Aike Duo pursues the green production concept of low carbon and energy conservation, and upholds the scientific outlook on development that is responsible for society, the environment, and the economy. It has successively been awarded the titles of "Energy Conservation and Low Carbon Demonstration Park" and "Circular Economy Demonstration Park". Aike Duo took the lead in obtaining the Class B boiler production qualification in the wall - hung boiler industry and currently holds more than 80 national patents and dozens of industry and national honors.Research and Development CenterProduction WorkshopProduction WorkshopOur AdvantagesQuality Assurance:Professional Advantages:Price Advantages:The products are qualified in quality and undergo factory testing. Any product can be certified according to customer requirements.Nearly 20 years of experience in R&D and manufacturing of gas equipment.High-quality and affordable, providing thoughtful services for every customer.OEM Services:After-Sales Advantages:Large Scale:Tailor-made according to customer needs.Long-term after-sales service is provided for all equipment.Factory area: 23,025m2, production center: 18,000m2, R&D center: 8,000m2.CertificationsPackaging & ShippingAfter Sales ServiceWe provide comprehensive after-sales guarantee services for our products. For faults caused by non-human factors during the warranty period, we offer free maintenance; after the warranty period, we provide lifelong maintenance, and only charge cost fees for the services.FAQ1.How many years is the product warranty?The warranty period for household products is five years; for industrial and commercial products, it is two years.2.Can this product be customized according to requirements?Customization is supported. We can carry out personalized customization of products according to your drawings and requirements.3.Why choose us?Good product quality, reasonable and competitive prices.Nearly 20 years of manufacturing experience with a mature product line.OEM and ODM services can be tailored to your needs.4.Are you a manufacturer or a trading company?We are a manufacturer and source factory with nearly 20 years of manufacturing experience. You are welcome to visit and inspect our facilities.5.If we purchase your products, what quality guarantees do you offer?The components we use have passed our rigorous testing.We have a strong QC team to control the quality of each production process.Our philosophy is "credibility first, customer first, and quality satisfaction."
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...