CIPDB › China Industry › Industrial Equipment & Components › Boiler & Furnace
Factory Direct Sales and Customization of Industrial and Commercial Heating Hot Water Full-Premix Condensing Stainless Steel Gas Boiler1
Boiler FurnaceBoilerGas Boiler
Shandong Aikeduo Heat Energy Technology Co., Ltd.
Preview:
Product DescriptionProduct DescriptionNOx emissions:<30mg/m3Rated heat supply:0.015-2.1MWApplicable energy source: Natural gasIt is a heat source supply device that uses natural gas as the main fuel for combustion, converting the chemical energy in it into heat energy and transferring it to water, turning the water into a state with a certain pressure and temperature to meet the heating and domestic hot water needs of various medium and large-sized facilities.Condensing heat exchange technologyDriven by the fan, the gas and air pass through the Venturi tube. After that, the gases are fully mixed and enter the surface of the burner for combustion according to a constant ratio. The high-temperature flue gas generated by the combustion exchanges heat countercurrently with the water in the stainless steel corrugated tube and the shell of the fire tube. The water in the pipeline enters from the lower part and exits from the upper part. The temperature of the high-temperature flue gas drops to the condensing temperature, generating a large amount of condensed water. The condensed water and the flue gas are discharged together through the smoke collecting chamber.The fully premixed condensing stainless steel boiler uses a gradually changing wavy shape pressed from 316L stainless steel pipes as the vertical fire tube (patented technology), which increases the heat exchange area, improves the heat exchange efficiency, and reduces the exhaust gas temperature. The smoke collecting chamber made of stainless steel effectively prevents corrosion from condensed water.Characteristics of fully premixed combustionThe fully premixed combustion mode effectively reduces the emission of pollutants. Fully premixed combustion does not generate fuel-type nitrogen oxides; it does not generate prompt-type nitrogen oxides; and it reduces the generation concentration of temperature-type nitrogen oxides. It also reduces the concentration of CO.CO is an intermediate product generated by the oxidation of carbon-containing fuels. All the carbon originally contained in the fuel will first be oxidized to CO and then further oxidized to CO2. Experiments have shown that at the flame temperature, if there is sufficient oxygen and residence time, the concentration of CO will drop to a very low level after the reaction. Therefore, the emission concentration of CO in fully premixed combustion is very low.Boiler characteristics1.Condensing and highly efficient: With unique patented stainless steel condensing technology and wave-shaped heat exchange tubes, it enhances the turbulence of flue gas, enables full contact with the tube wall for heat exchange, fully absorbs the heat of flue gas, and the thermal efficiency can reach 108%. 2.Low nitrogen and environmentally friendly: Adopting a fully premixed combustion system and low-nitrogen burners reduces the generation of nitrogen oxides. The NOx content is less than 30mg/m3 under any working conditions, meeting the strictest environmental protection standards in China. 3.Corrosion-resistant: Using 316L stainless steel heat exchange tubes and advanced automated welding processes makes it more resistant to corrosion. 4.Not easy to be blocked: The large flue gas passages of the heat exchange tubes can prevent blockages in flue ducts or water pipes caused by gas quality or water quality problems. 5.Small floor space: The whole machine adopts a vertical structure, which is compactly designed and reduces the occupied area of the boiler room. 6.Simple maintenance: The optimized structural design makes maintenance simple. 7.Intelligent control: The boiler can be equipped with a remote monitoring system, making the operation and management of the boiler more convenient and intelligent. 8.Small thermal stress: The wave-shaped heat exchange tubes have a certain elasticity, and they will not generate excessive thermal stress, thus prolonging the service life. 9.More stable: Adopting a fire tube structure design, compared with the water tube structure, it has a larger water capacity, is not prone to failures and damages caused by problems such as blockages and scaling, and operates more stably.Differences from traditional hot water boilers1.High thermal efficiency. When the supply and return water temperatures are different, the thermal efficiency ranges from 98% to 108%.2.Wide range of heat power adjustment. The heat power can be steplessly adjusted between 20% and 100%.3. Compact structure with a small floor space.4.The heat exchanger is made of lightweight materials with fast heat transfer.5.Fully premixed combustion.6.The flue gas exhaust temperature is between 30℃ and 70℃.7.Ultra-low emissions of CO and NOx, making it more environmentally friendly.8.The noise level is lower than 70dB.Economical versionDeluxe versionSpecificationProjectunitMQBL150-AMQBL240-AMQBL360-AMQBL720-AMQBL1100-AMQBL1400-AMQBL2100-ARated heat inputkw150240360720110014002100Thermal efficiency%108108108108108108108Energy efficiency class1111111Heating temperature adjustment range℃30-8030-8030-8030-8030-8030-8030-80Gas supply pressure (12T)KPa2-53-53-53-55-85-85-8Maximum gas flow ratem3/h15243672110140210Minimum gas flow ratem3/h34.87.214.4222842CO emissionppm≤40≤40≤40≤40≤40≤40≤40NOx emissionmg/m3≤30≤30≤30≤30≤30≤30≤30Main power supplyV/Hz220V/50HZ220V/50HZ220V/50HZ220V/50HZ380V/50HZ380V/50HZ380V/50HZElectric powerW2605705701310265031508550Hot water production capacity (Δt=25℃)t/h5.38.512.825.539.149.674.4Dimensions (L*W*H)mm898*520*14201150*850*21001250*950*21001500*1250*22501850*1500*23501745*1500*28502055*1775*3150Water holding capacitykg200300400700120014501900Weightkg150450700900140016502050Water inlet and outlet diametermmDN50DN65DN65DN80DN100DN100DN150Chimney diametermm160200200250315315400Gas port diametermmDN25DN32DN32DN50DN65DN65DN80Reference heating aream21300-43002000-69003000-100006000-200009000-3100012000-4000017000-60000Company ProfileShandong Aike Duo Thermal Energy Technology Co., Ltd. was founded in 2008 and is located at the foot of the majestic Mount Tai. It is a leading integrated gas heating service provider in China. For more than a decade, "Aike Duo" has always adhered to the corporate vision of "building the first brand of gas heating in China and becoming the best clean heating supplier in China", and is committed to the research and production of "gas heating equipment" as well as the promotion and implementation of "distributed clean heating" solutions. Through years of sharpening, Aike Duo has always moved forward with honors and has now grown into a "national high - tech enterprise" integrating production, research, and sales. It has multiple automated production lines and inspection lines, and has transformed into an automated digital factory. The production capacity of gas wall - hung boilers exceeds 600,000 units, and the annual production capacity of various types of industrial and commercial gas boilers is 10,000 units. It is the largest distributed gas heating equipment production base in northern China. Aike Duo pursues the green production concept of low carbon and energy conservation, and upholds the scientific outlook on development that is responsible for society, the environment, and the economy. It has successively been awarded the titles of "Energy Conservation and Low Carbon Demonstration Park" and "Circular Economy Demonstration Park". Aike Duo took the lead in obtaining the Class B boiler production qualification in the wall - hung boiler industry and currently holds more than 80 national patents and dozens of industry and national honors.Research and Development CenterProduction WorkshopProduction WorkshopOur AdvantagesQuality Assurance:Professional Advantages:Price Advantages:The products are qualified in quality and undergo factory testing. Any product can be certified according to customer requirements.Nearly 20 years of experience in R&D and manufacturing of gas equipment.High-quality and affordable, providing thoughtful services for every customer.OEM Services:After-Sales Advantages:Large Scale:Tailor-made according to customer needs.Long-term after-sales service is provided for all equipment.Factory area: 23,025m2, production center: 18,000m2, R&D center: 8,000m2.CertificationsPackaging & ShippingAfter Sales ServiceWe provide comprehensive after-sales guarantee services for our products. For faults caused by non-human factors during the warranty period, we offer free maintenance; after the warranty period, we provide lifelong maintenance, and only charge cost fees for the services.FAQ1.How many years is the product warranty?The warranty period for household products is five years; for industrial and commercial products, it is two years.2.Can this product be customized according to requirements?Customization is supported. We can carry out personalized customization of products according to your drawings and requirements.3.Why choose us?Good product quality, reasonable and competitive prices.Nearly 20 years of manufacturing experience with a mature product line.OEM and ODM services can be tailored to your needs.4.Are you a manufacturer or a trading company?We are a manufacturer and source factory with nearly 20 years of manufacturing experience. You are welcome to visit and inspect our facilities.5.If we purchase your products, what quality guarantees do you offer?The components we use have passed our rigorous testing.We have a strong QC team to control the quality of each production process.Our philosophy is "credibility first, customer first, and quality satisfaction."
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...