IPDB › China Industry › Industrial Equipment & Components › Industrial Humidifier & Dehumidifier & Parts
Ultrasonic Industrial Humidifier-Ultrasonic Industrial Humidifier Equipment1
Industrial Humidifier Dehumidifier Parts, Ultrasonic Industrial Humidifier, Industrial Humidifier
TRYTE TECHNOLOGY (HUNAN) DEVELOPMENT CO., LTD.
Preview:
Product Description TR-JS-G090 Ultrasonic industrial humidifierProduct Introduction:TR-JS-G090series of ultrasound industrial humidifiers have mobile type and wall hanging type. the machine has stainless steel tank and epoxy powder finishing. Elegant appearance, practical, easy to install. TR-JS-G090 series of ultrasound industrial humidifiers have the standard water inlet, drainage valve and over fall gap. The water inlet can automatically water refill. The water level can be automatically controlled. There are 3 kinds of controlling way according types.1) Humidifier manual control mode (type without letters). Users can make one or more to work independently, but also can make combination and centralized control2) Humidifier digital timing controller and automatic cycle timing controller (type with letter "S"). Automatic cycle control cycle is from one minute to 99 hours. It can be set working time and stopping time arbitrarily and could work continuously without staff duties;3) Humidifier digital automatic humidity controller (type with letter "Z"). The humidity controlling range can be set from 1% RH to 100% RH arbitrarily. The control accuracy is ± 5% RH. At this time, equipment can be automatically set at work without staff duties. TR-JS-G090 series of ultrasound industrial humidifiers, the output tube and fog outlet can be fixed on the place that needs to humidify according to the user's requirement. The connecting of pipeline should be sealed. TR-JS-G090 series of ultrasound industrial humidifiers have clustered aerosol components and water protection device. The fog particle diameter is only 1-10μm; Particles are uniform and can be suspended in the air among a long time. TR-JS-G090 series of ultrasound industrial humidifiers are without mechanical drive when fogging , no noise, no pollution, high atomization efficiency, low failure rate, low energy consumption. It's kind of efficient, reliable, practical ultrasonic humidifier. Industrial humidifier service conditionsEnvironment temperature-1~40 centigradeWater supply pressure1-4KG/CM 2Environment humidity≤99%RHfeedwater temperature1-38 centigradesupply water qualitysoftened water, purified water, deionized waterambient environmentNo high-temperature secondary source, without a strong magnetic field interference sourceTechnical parameters:Humidifying capacity: 9 Kg/h Control mode: manual control/ automatic control by humidityDisplay: mobile humidity displayPower source:220v/50HzPower:900w Dimension (cm): 71×35×59 TR-JS-G120 Ultrasonic industrial humidifierProduct Introduction:TR-JS-G120 series of ultrasound industrial humidifiers have mobile type and wall hanging type. The machine has stainless steel tank and epoxy powder finishing. Elegant appearance, practical, easy to install. TR-JS-G120series of ultrasound industrial humidifiers have the standard water inlet, drainage valve and over fall gap. The water inlet can automatically water refill. The water level can be automatically controlled.There are 3 kinds of controlling way according types.1) Humidifier manual control mode (type without letters). Users can make one or more to work independently, but also can make combination and centralized control 2) Humidifier digital timing controller and automatic cycle timing controller (type with letter "S"). Automatic cycle control cycle is from one minute to 99 hours. It can be set working time and stopping time arbitrarily and could work continuously without staff duties;3) Humidifier digital automatic humidity controller (type with letter "Z"). The humidity controlling range can be set from 1% RH to 100% RH arbitrarily. The control accuracy is ± 5% RH. at this time, equipment can be automatically set at work without staff duties.TR-JS-G120 series of ultrasound industrial humidifiers, the output tube and fog outlet can be fixed on the place that needs to humidify according to the user's requirement. The connecting of pipeline should be sealed. TR-JS-G120 series of ultrasound industrial humidifiers have clustered aerosol components and water protection device. The fog particle diameter is only 1-10μm; Particles are uniform and can be suspended in the air among a long time. TR-JS-G120 series of ultrasound industrial humidifiers are without mechanical drive when fogging, no noise, no pollution, high atomization efficiency, low failure rate, low energy consumption. It's kind of efficient, reliable, practical ultrasonic humidifier. Industrial humidifier service conditionsEnvironment temperature-1~40 centigradeWater supply pressure1-4KG/CM 2Environment humidity≤99%RHfeedwater temperature1-38 centigradesupply water qualitysoftened water, purified water, deionized waterambient environmentNo high-temperature secondary source, without a strong magnetic field interference sourceTechnical parameters:Humidifying capacity: 12 Kg/h Control mode: manual control/ automatic control by humidityDisplay: mobile humidity displayPower source:220v/50HzPower:1200w Dimension (cm): 71×35×59Packing:Company Information: As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name. TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.Why choose us?1. We supply high quality products with reasonable price.2. We are the professional manufacturer;3. Advanced production machine;4. Strict quality control system;5. Ten people research&develop team;6. We have professional sales team;
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.