IPDB › China Industry › Industrial Equipment & Components › Drying Machine
FL-B Series Fluidized Granulation and Drying Machine1
Drying Machine, Mixer, Drying
Jiangsu Fashite Chemical Equipment Co., Ltd
Preview:
Product Description Product OverviewA thermal energy source (such as hot water, low-pressure steam, or heat-conducting oil) is introduced into the closed interlayer, and the heat is transferred to the materials to be dried through the inner shell.Driven by power, the tank rotates slowly, and the materials inside the tank are continuously mixed, so as to achieve the purpose of strengthening the drying.The materials are in a vacuum state. The decrease in vapor pressure makes the moisture (solvent) on the surface of the materials reach a saturated state and evaporate, which is then timely discharged and recovered by the vacuum pump. The moisture (solvent) inside the materials continuously penetrates, evaporates, and is discharged towards the surface. These three processes keep going on, and the materials can achieve the drying purpose within a short time. Product FeaturesWhen heated by oil, it adopts automatic constant temperature control. It can dry biochemical products and mineral raw materials, and the temperature can range from 20°C to 160°C.It has a high thermal efficiency, which is more than twice that of a general oven.With indirect heating, the materials will not be contaminated, meeting the requirements of "GMP". The equipment is easy to maintain, operate and clean. Applicable MaterialsIt is suitable for the concentration, mixing, drying of powdery, granular and fibrous materials in the chemical, pharmaceutical, food and other industries, as well as materials that require low-temperature drying (such as biochemical products, etc.). It is more suitable for the drying of materials that are easy to oxidize, volatile, heat-sensitive, strongly irritating, toxic, and materials for which the crystal structure is not allowed to be damaged. Technical ParametersSpecification 100 350 500 750 1000 1500 2000 3500 4500 5000NameInner Volume of the Tank (L) 100 350 500 750 1000 1500 2000 3500 4500 5000Charging Volume (L) ≤50 ≤175 ≤250 ≤375 ≤500 ≤750 ≤1000 ≤1750 ≤2250 ≤2500Heating Area (m2) 1.16 2 2.63 3.5 4.61 5.58 7.5 11.2 13.1 14.1Rotational Speed (rpm) There seems to be an error here as "4 6 " is not a valid rotational speed value. It should be corrected.Motor Power (kw) 0.75 1.1 1.5 2 3 3 4 5.5 7.5 11Floor Area (Length × Width) (mm) 2160×800 2260×800 2350×800 2560×1000 2860×1300 3060×1300 3260×1400 3760×1800 3960×2000 4400×2500Rotational Height (mm) 1750 2100 2250 2490 2800 2940 2990 3490 4100 4200Design Pressure Inside the Tank (MPa) -0.25Design Pressure of the Jacket (MPa) ≤0.3Working Temperature (°C) Inside the tank ≤85, Jacket ≤140When Using a Condenser, Vacuum Pump Model, Power 2X-15A 2X-15A 2X-30A 2X-30A 2X-70A JZJX300-8 JZJX300-4 JZJX600-8 JZJX600-4 JZJX300-42KW 2KW 3KW 3KW 505KW 7KW 9.5KW 11KW 20.5KW 22KWWhen Not Using a Condenser, Vacuum Pump Model, Power SK-0.4 SK-0.8 SK-0.8 SK-2.7B SK-2.7B SK-3 SK-6 SK-6 SK-9 SK-101.5KW 2.2KW 2.2KW 4KW 4KW 5.5KW 11KW 11KW 15KW 18.5KWWeight (kg) 800 1100 1200 1500 2800 3300 3600 6400 7500 8600
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.