IPDB › China Industry › Industrial Equipment & Components › Welding & Soldering Supplies
T3 T4 Sac305 Sn63pb37 Leaded Low Temp No Clean PCB Reflow Soldering BGA Ppd SMD SMT Lead Free Bismuth Silver Copper Tin Solder Paste for Electronics 63 37 42 581
Welding Soldering Supplies, Solder Paste, Solder Paste for SMD
Foshan Xi Feng Tin Products Co., Ltd.
Preview:
Product Description T3 T4 Sac305 Sn63pb37 Leaded Low Temp No Clean PCB Reflow Soldering BGA Ppd SMD SMT Lead Free Bismuth Silver Copper Tin Solder Paste for Electronics 63 37 42 58We produce differenty types of solder paste:Lead Free Solder Paste: Sn96.5Ag3.0Cu0.5, Sn99Ag0.3Cu0.7, Sn42Bi58 etcLeaded Solder Paste: Sn63Pb37, Sn60Pb40, Sn50Pb50 etcApplications of Lead Free Solder Paste Sn96.5Ag3.0Cu0.5 SAC305:This solder paste SAC305 is primarily used for electronics manufacturing by surface mount technology (SMT) and through-hole soldering. Including:Consumer Electronics: It finds application in the production of consumer electronics such as refrigerators, smartphones, tablets, laptops, and gaming devices.Automotive Electronics: The solder paste is suitable for soldering critical components in automotive electronics systems.How to use the Lead Free Solder Paste Sn96.5Ag3.0Cu0.5 SAC305?Stencil Printing: Prepare the right stencil and apply solder paste SAC305 through the stencil onto designated solder pads on a printed circuit board (PCB).Place SMD components: Accurately place surface mount components onto the solder paste-covered pads. This can either be done by high accurate automatic SMT soldering machine, or manually placed by tweezers.Conduct the Reflow Soldering: Heat the assembled PCB to melt the paste and create secure solder joints during reflow soldering. For small DIY projects, using hot air gun to conduct the soldering is also workable.Instruction on Storage and Using of Lead Free Solder Paste Sn96.5Ag3.0Cu0.5 SAC305:It is recommended to store at 2°C to 10°C to prevent paste drying or degradation.It's recommended to get the solder paste out of refrigerator 3 to 6 hours prior to using to get the paste come to the room temperature. Well mix the paste using a mixer machine or doing it manually by using spatula.Un-finished solder paste must be well seal up again in the airtight jars to prevent contamination and moisture absorption, and put back into the refrigerator.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.