IPDB › China Industry › Industrial Equipment & Components › Drying Machine
304 Stainless Steel Dryer Nutsche Filter Dryer, Washing and Drying Machine1
Drying Machine, Washing and Drying Machine, Spray Drying Equipment, Spray Drying Machine
Zhejiang Jhen Ten Machinery Co., Ltd.
Preview:
Product Description Packaging & DeliveryPackaging DetailsPLYWOOD CASEPortNINGBOLead Time :Quantity(Sets)1 - 1>1Est. Time(days)30To be negotiated DN650 Stainless Steel Pharmaceutical GMP Grade Agitated Nutsche Filter Dryer Product DescriptionFilter-dryer working principleThe Nutsche filter dryer comnines two process operations, filtration and drying, in a single piece of equipment. Filtration liquid-solid separation and agitated vacuum drying allow batch manufacturing of chemical and pharmaceutical products.Filter dryer can also be used for other process such as vegetal extraction.FeaturesThe design and assembly of the equipment are carried out strictly following national GMP requirements, and fully conforming to pharmaceutical production process requirements. The system is safe, stable and reliable.The equipment materials are strictly controlled. The parts that directly contact materials are made of non-toxic and corrosion-resistant sealing material such as austenitic stainless steel(316L 304), Hastelloy, PTFE FFKM or EPDM etc. The filter screen adopts metal sintering screen made of SUS316L, C22 etc.The interior surfaces of the equipment that directly contact materials are flat and smooth without dead comer for the convenience of cleaning and sterilizing.The equipment dose not pollute the external environment. and the measures of dust prevention, leakage prevention, heat insulation and noise prevention are properly adopted. Under the fully closed working status, the motor, speed reducer and lifting device are protected by stainless steel outer covers, The retum duct in jacket adopts heat preservation cotton to insulate, can greatly reduce heat oss, heat exchange with the outside environment and the influence on the surroundings.Safe and reliable explosion-proof electrical appliances are adopted. The pulleys that can eliminate static electricity and other safe interlocks and safety devices are allocated.All the pipes of materials, solvents and nitrogen gas are designed to have no dead comer and blind pipe. The equipment surfaces are subjected to mechanical automatic fine polishing or electrolytic polishing with the interior surface Ras0 4 and the exterior surface Ra≤0.8.The blending shaft and lateral discharging valve stem are installed with metal bellows.360 spraying cleaning spray balls for CIP are equipped in the tank. FeaturesThe design and assembly of the equipment are carried out strictly following national GMP requirements, and fully conforming to pharmaceutical production process requirements. The system is safe, stable and reliable.The equipment materials are strictly controlled. The parts that directly contact materials are made of non-toxic and corrosion-resistant sealing material such as austenitic stainless steel(316L 304), Hastelloy, PTFE FFKM or EPDM etc. The filter screen adopts metal sintering screen made of SUS316L, C22 etc.The interior surfaces of the equipment that directly contact materials are flat and smooth without dead comer for the convenience of cleaning and sterilizing.The equipment dose not pollute the external environment. and the measures of dust prevention, leakage prevention, heat insulation and noise prevention are properly adopted. Under the fully closed working status, the motor, speed reducer and lifting device are protected by stainless steel outer covers, The retum duct in jacket adopts heat preservation cotton to insulate, can greatly reduce heat oss, heat exchange with the outside environment and the influence on the surroundings.Safe and reliable explosion-proof electrical appliances are adopted. The pulleys that can eliminate static electricity and other safe interlocks and safety devices are allocated.All the pipes of materials, solvents and nitrogen gas are designed to have no dead comer and blind pipe. The equipment surfaces are subjected to mechanical automatic fine polishing or electrolytic polishing with the interior surface Ras0 4 and the exterior surface Ra≤0.8.The blending shaft and lateral discharging valve stem are installed with metal bellows.360 spraying cleaning spray balls for CIP are equipped in the tank. The balls can adopt 360-degree rotary spray ball.Dry-process double-face mechanical seal, nitrogen protection and cooling.Dust capture device with CIP functionBatch filtration-drying processes can be in the follow steps1.Filling The vessel is filled with a slurry(liquid/solid mixture), generally fed from a reactor or crystallizing tank.2.FiltrationA liquid/solid separation process takes place through the filtration media ,Filtration(solvent) are collected beneath the filter plate.3.Piston displacement washingWashing liquid are used to wash the product cake ,Avolume of liquid is displaced through the cake.washing it.4.Reslurry washingThe agitator is used the re-slurry the solid in a washing solvent.5.SmoothingThe agitator is used to smooth the wet cake in the filter dryer, to avoid the formation of cracks or preferential paths.6.Drying and coolingAgitated vacuum drying consists in applying a vacuum on the vessel, while heating the walls and agitator using thermal circuits.This allows to reach the liquid boiling point and to dry the product.7.DischargingThe specially designed agitator pushes the product out towards a side discharge port. Main parametersModelFiltering Area(m2)lnside Diameter(mm)Nomingl Volume(m3)Filter Cake Heighl(mm)Blade Lifting Heighl(mm)Motor Power(kw)Net Wwight(kg) Total Height(mm)DN3250.083250.041001200.376002050DN4000.1254000.071201500.558602550DN5000.195000.151401602.215003000DN6000.286500.221802002.217003300DN6500.38000.281802002.218503400DN8000.510000.46200220322503500DN10000.812000.952202505.535003800DN1200114001.22503007.549004000DN14001.516001.93003501165004500DN1600218002.593003501575004500DN18002.520003.235040015100004700DN2000323004.540045018.5117005100DN2300426006.440045022128005200DN26005.32800940045022170005600DN26006300010.545050030210005800DN30007 1250055037240006000 Company Profile Wenzhou Jhenten Machinery Co exceeds in this filed and has been credited wth honors of ISO9001-2008 quality management system certificate, CE certificate and ASME certificate.In additon to the introduction of new manufacturing methods an the purchase of advancedwelding equipment, we are also dedicated to researching the improvement of quality, functionand usage life of our products. We have been meenting global demand of high quality & technical support to our clients. Our products cover from all kinds sanitary filter, cartidge filter, bag filter, mixing tank, strorage tank etc, which have been applied into fields of pharmacy, food & beverage, biological engineering, lab soluton laboratories, mineral water, liquor and cosmetics.No matter the functions, data presentation material use, welding techniques, Qc, or the lookof our products have gone through careful design and are strictly comply with ISO9001 and CE standard system. Besides we have obtained the sanitary license and honour of high quality & honesty from authority. FAQQ: CAN I HAVE SAMPLES TO TEST?A: Yes, we are pleased to supply samples to test and check quality, miled sample order is available. Please note, free samples is not acceptable. Q: DO YOU HAVE ANY MOQ LIMITED?A: Our MOQ is 1PC to supply new customers. Q: WHAT'S THE LEAD TIME?A: Sample: 20-25days. Mass production: 25-30days depend on the order quantity. Q: HOW DO YOU SHIP THE GOODS AND HOW LONG DOES IT TAKE?A: We ususlly ship by sea. DHL, UPS, fedex TNT are also acceptable.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.