IPDB › China Industry › Industrial Equipment & Components › Drone & UAV & Accessories
Elrs 433MHz Rx Tx Module Receiver Kit 433MHz Receiver Expresslrs Receiver Nano1
Drone UAV Accessories, Receiver, Elrs
Shenzhen Xingkai Technology Co., Ltd
Preview:
Product Description Basic Info.Frequency360/400/433/500/530/560/720/750/868/915MHz /2.4GhzOutput power100mW / 250mW / 500mW / 1000mWIntegrated circuitSX1278Refresh rate25Hz/50Hz/100Hz/200Hz (720MHz)ConnectorSMAInput voltage7-12VProduct Description Transmitter compatibilityThis receiver can be used to frequency different brands of high frequency heads. The ELRS project is an open source project, so as long as the high-frequency headers of the ELRS protocol are used, regardless of the brand, they can be linked to each other, but three conditions must be met:1. The frequency should be the same, the same is 2.4G or the same433Mhz, etc2. There are three types of firmware version certification standards: AU, EU, and FCC. To be consistent, for example, the high-frequency head flashes the FCC 3.0.0 firmware, then the receiver should also flash the FCC 3.0.0 firmware or above;3. None of them have a linking password, or they all have the same password. Linking mode1. After welding the receiver, quickly energize the aircraft three times, that is, ~ unplug the power immediately after powering on - unplug the power immediately - power on does not pull out; The interval is within 1.5 seconds, so that, if done correctly, the receiver's light flashes rapidly twice in a cycle, indicating that it is in the binding. At this time, press the bind button of the remote control script to bind. When the linking is successful, the receiver light turns solid.2. he receiver can't enter the band state for the first time, and the light is always on. Generally, the TXRX port of some flight controllers is abnormal, causing the receiver to enter boot flashing mode when it is powered on, and only a TX RX on the flight controller needs to be changed at this time.3. Why does my receiver light keep flashing? When you turn on the power, you have not entered the linking state, or the remote control receiver has no signal for 60 seconds, it will automatically enter the WIFI flashing mode, and the indicator light flashes quickly.4. How to enter the wifi flashing mode to flash the firmware of the receiver? Regardless of it when it is powered on, it will enter the WIFI flashing mode in about 60 seconds, and the light will flash quickly. WiFi flashing instructionssoftware/updating/wifi-updating/#method-1-hotspot series receivers, is based on ExpressLRS open source architecture and programs, the receiver uses low latency and high refresh rate RF chip, 25Hz-500Hz high refresh rate, very suitable for FPV competition and long-range FPV. At the same time, these receivers have ultra-light and ultra-small dimensions, which are easier to install and more concise aircraft. Indicator Status: Double Flash: Code Mode Slow flashing: No transmitting signal is received Solid: The transmit signal is received915M receiver parameters Model: ELRS-915M-MININame : ExpressLRS Receiver frequency:915Mhzantenna: T-shapedchip: SX1276+ESP8285color: black Backhaulpower: 100mWInput voltage: 3.6V-5.5VAntenna connectors: IPEX1weight: 0.8g(Receiver only)size: 11mm*22mm 2.4G receiver parametersModel: ELRS-2.4G-NANOName : ExpressLRS Receiver frequency:2.4Ghzantenna: T-shapedchip: SX1281+ESP8285color: purple Backhaulpower: 100mWInput voltage: 3.6V-5.5VAntenna connectors: IPEX1weight: 0.6g(Receiver only)size: 11mm*18mm 750MHz receiver parametersModel: ELRS-750M-MININame : ExpressLRS Receiver frequency:750Mhzantenna: T-shapedchip: SX1276+ESP8285color: black Backhaulpower: 100mWInput voltage: 3.6V-5.5VAntenna connectors: IPEX1weight: 0.8g(Receiver only)size: 11mm*22mm 530M receiver parametersModel: ELRS-530M-MININame : ExpressLRS Receiverfrequency:530Mhzantenna: T-shapedchip: SX1278+ESP8285color: black Backhaulpower: 100mWInput voltage: 3.6V-5.5VAntenna connectors: IPEX1weight: 0.8g(Receiver only)size: 11mm*22mm 433M receiver parametersModel: ELRS-433M-MININame : ExpressLRS Receiverfrequency:433Mhzantenna: T-shapedchip: SX1278+ESP8285color: black Backhaulpower: 100mWInput voltage: 3.6V-5.5VAntenna connectors: IPEX1weight: 0.8g(Receiver only)size: 11mm*22mm 360M receiver parametersModel: ELRS-360M-MININame : ExpressLRS Receiverfrequency:360Mhzantenna: T-shapedchip: SX1278+ESP8285color: black Backhaulpower: 100mWInput voltage: 3.6V-5.5VAntenna connectors: IPEX1weight: 0.8g(Receiver only)size: 11mm*22mm
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.