IPDB › China Industry › Industrial Equipment & Components › Environment Protection Device
Durable EPDM Tubular Submersible Tubular Aerators for Enhanced Aquatic Environments1
Environment Protection Device, EPDM Tubular Aerators, Enhanced Aquatic Aerators
Nanjing Lanling Environmental Technology Co., Ltd.
Preview:
Product Description Product DescriptionThe tubular microporous aerator is a mature, reliable, and energy-efficient aeration device, mainly used in municipaland industrial wastewater treatment. It features low pressure loss, high oxygen utilization efficiency, uniform bubblediffusion, strong corrosion resistance, low energy consumption, high efficiency, and a long service life.Features:Efficient Oxygen Transfer: Tube aerators release fine bubbles into the water, ensuring efficient oxygen transfer and enhancing the aerobic treatment process.Uniform Oxygen Distribution: The system provides consistent and uniform distribution of oxygen throughout the water, improving the effectiveness of the treatment.Low Energy Consumption: Tube aerators typically require less energy than other aeration methods, making them cost-effective and energy-efficient.Durable and Corrosion-Resistant: The aeration tubes are often made from durable, corrosion-resistant materials (like PVC or rubber), ensuring long-lasting performance even in harsh environments.Quiet Operation: These systems operate quietly compared to other aeration techniques, reducing noise pollution in the treatment area.Simple Installation and Maintenance: Tube aerators are easy to install and maintain, with minimal parts that need regular servicing. Cleaning the tubes to prevent clogging is the primary maintenance task.Space-Efficient: Since the aerators are submerged in water, they don't occupy much space on the surface, which is especially useful in areas where space is limited.Scalability: Tube aeration systems can be adapted to various scales, from small aquariums to large wastewater treatment facilities, making them versatile for different applications.Minimal Disruption: Because the system is submerged, it has minimal impact on the surrounding environment, causing less disturbance compared to surface aeration methods.Product Parameters Product ParametersRelevant Technical ParametersModelφ65mmservice area:0.8-1.2m2/mBubble Diameter:1-2mmSpecificationL=500mm,L=750mm,L=1000mmoxygen utilization rate:≥28%oxygenation capacity:≥0.38Kg/hConnection Methodhoop connectionOxygenation power efficiency:≥7.1Kg/KW ·hair flow rate:5-10m3/h ·mMaterialEPDM rubber film, silicone rubber filmstomatal density:8000-12000 per/mresistance loss:≤3500PaModelφ93mmservice area:1.75-5.61m2/mBubble Diameter:1-2mmSpecificationL=500mm,L=750mm,L=1000mmoxygen utilization rate:≥35%oxygenation capacity:≥0.58Kg/hConnection Methodhoop connectionOxygenation power efficiency:≥8.9Kg/KW ·hair flow rate:8-15m3/h ·mMaterialEPDM rubber film, silicone rubber film stomatal density:19000-23000per/mresistance loss:≤4000Pa PRODUCT STRUCTURERubber membrane hose is made of silicone and EPDM rubber, which has the characteristics of heat resistance, ozone resistance,acid and alkali resistance and good chemical stability.heat, ozone, acid and alkali resistance, good chemical stability and othercharacteristics, compared with the general rubberCompared with general rubber membrane, it can greatly improve its service life.01The support body adopts hollow, water-filled form, which greatly reduces the aerator's buoyancy in the water.The buoyancy of theaerator in the water is greatly reduced.02Aeration holes for a zigzag long holes, so that it has a good tension and instantaneous closure, aeration can be released whenthe diameter of less than 2MM micro-bubbles. In order to obtain a high oxygen utilization rate, the oxygen utilization rate of 28 ~ 35%.03The use of air-guide tanks, so that the aerator inside the rapid and uniform distribution of gas, so that theAeration membrane tubeforce uniformity, extend the life of the aeration membrane tube and release gasUniformity of the release of gas bubbles, improvethe aeration effect; air guide groove is a narrow concave groove, the rubber membrane tube on itsGroove, the rubber membranetube area is not open aeration holes, stop supplying gas, the rubber membrane is close to the guide groove.When the air supply isstopped, the rubber membrane is tightly adhered to the air guide groove, thus preventing the occurrence of sewage backflow.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.