Industrial Brake for Bridge Overhead Crane Electro Magnetic Hydraulic Windlass CE¹

Product Description Product DescriptionED Series electro hydraulic thruster is a compact drive control device integrating motor, centrifugal pump and oil cylinder. It is widely used as a drive device for various block brakes and disc brakes, as well as for various industrial valves and gates. , Directional swing and rotation (<90°) device and drive control of clamping deviceConditions of use1.Ambient temperature: -20oC~50oC use DB-25 hydraulic oil, below -20oC use YH-10 aviation hydraulic oil, no heater; With DB-25 hydraulic fluid, must A heater must be installed.2.Continuous work S1, intermittent work S3-60%.3.Voltage and frequency: three-phase AC 380V/50(60)Hz, our company can also provide other different frequency, different voltage products, please negotiate to order when necessary.4.Three-phase AC asynchronous motor, in accordance with the regulations (GB755-2000), the performance is detailed in "Technical data".Insulation class: F, electrical protection class: IP65.5. Cable: The maximum cross section of the wire is 4X2.5mm2.6. Efficient anti-corrosion products: for corrosive media in the air and high relative humidity, and may generate condensate. The stator of the motor is made of vacuum injection molding and paintedWith special anti-corrosion paint, series of products can provide anti-corrosion products, users need to contact the companyDetailed PhotosFeatures1.The piston rod adopts advanced protective measures to reduce wear and anti-corrosion, with double-layer dust seal and hydraulic systemThe oil chamber seal adopts double sealing ring, which greatly improves the service life.2. Connecting rod can be rotated 360°.3. Additional devices are shown in the attached table.Technical Specifications ModelRated thrust (N)Rated travel(nm)Brake spring force(N)Return spring force(ON)Rated frequency(HZ)Input power(QN)Rated voltage(V)Rated current (A)Maximum operating frequency(h)Weight(Kg)Short stroke pusher          E d23522050180100501653800.52200010Ed3053005027095502003800.46200014Ed4044004027095502003800.46200014E d50,650060460267502103800.48200021Ed70570050460267502103800.50200021E d80,680060750267503303801.42200024Ed121/61250601200700503303801.44200039E d201,62000601900700504503801.45200039E d30163000602700700505503801.46150040Long stroke pusher          Ed50/12500120  502103800.48120026E d80/12800120  503303801.42120027Ed121/121250120  503303801.44120039E d201/122000120  S04503801.45120039E d301/123000120  505503801.4690040Ed630A26300120  5011003802.4630   Dimentions ModelAB DEF6HK  N0P0RSTUV E d23/52865026121220162016080804020016855575982015 Ed30/523705034151625161816080804019716855575982015 E d40,43774041151630161816080804019716       Ed50,6435603618203020231909512060254228555751002215 Ed70543050311720302024190951004125422       Ed80,6450603618203020231909512060254228555751002215 Ed50/12515120361820302023190951206025422       E d80/12530120361820302023190951206025422       Ed121,664560382525402535240112904026025130801201473520130E d201,664560382525402535240112904026025130801201473520130E d301664560382525402535240112904026025130801201473520130Ed121/12705120382525402535240112904026025      190Ed201/12705120382525402535240112904026025      190Ed301/12705120382525402535240112904026025      190Ed630A28651203825254025402701271106032725       company information  Huasui has 15 years of experience in crane and hoist design and manufacturing, 3 production factories covering an area of 168000 square meters, 10 production lines with annual production capacity 500 sets. It has more than 800 employees, including more than 20 technicians and more than 10% senior engineers. The factories have modern crane manufacturing and assembly equipment, and introduces European advanced management, process flow and quality control system to ensure safe, reliable and high quality cranes for customers, making customers' logistics operations easier and creating long-term value for customers.Our Advantagespackaging and transportationFactory pictureCertificationsFAQA: Can you provide custom service? B: Yes! We can customize all kinds of cranes according to your requirements. You just need to tell us your demands.A:Which industries do you service? B: We service many industries including machinery, metallurgy, railway and so on. High quality products in different fields will play an important role.A:Which areas do you service?B: We have a huge market both at home and abroad. We have exported our cranes to many countries, especially European, Africa and so on. A: How do you guarantee the quality?B: We will constantly check the quality during the manufacturing process, and strictly test the equipment before shipment, and we will also send you a quality certificate.A:What are the main products?B: Our main products are overhead and gantry cranes. Different products have different models and application scenarios. A:What international certifications has your company passed? B: Our cranes has passed CE, lSO, GOST, SGS, TUV, BV, and so on.  

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.