IPDB › China Industry › Industrial Equipment & Components › Industrial Ceramic Products
Industrial Alumina Ceramic High Temperature Furnace Tube/Pipe1
Industrial Ceramic Products, Zirconia Ceramic, Alumina Brick
Zibo Yunfeng Industrial Ceramics Co., Ltd.
Preview:
Product Description Qijing industrial ceramics are widely used in power, coal, metallurgy, chemical industry and other industries. As an abrasive material and corrosive medium.Qijing Industrial Ceramics is an ideal wear-resistant and corrosion-resistant pipeline, used to transport sand, coal, ash and aluminum liquid, and is suitable for different high-temperature pipeline inner diameters.In addition to the ash removal, slag discharge pipe, powder feeding and powder returning pipes of coal-fired power plants, ceramic-lined wear-resistant steel pipes are also widely used in the following industries:1. Mine:1. 1Coal water slurry, coal washing slime, mine filler, pulverized coal in the coal industry1. 2Metal mines: pipeline transportation of concentrates and tailings.2.1 Metallurgy:2. 2The blast furnace coal injection and slag conveying pipelines in iron and steel plants2.3 Optimal pipelines for steel-making conveying ferroalloys and refining outside the furnace.3. Cement plant.Basic Info.Thickness3~50mm or as Your RequestContent92% Alumina, 95% Alumina,T95,ZtaDensity3.6, 3.65,3.7,3.83,4.10, 5.9 g/cm3Compressive StrengthMore Than 1050 MPa...MOQ1tonSamplesFree Samples Can Be ProvidedDelivery Time25-40 Days as Your RequestPaymentT/T or L/CMarketIndia, Mumbai, Pakistan, Iran, etc.LabWe Have Our Own LabServiceReply Within 1 HoursCapacity15000 TonsPortQingdaoTrademarkUltramingTransport PackageSafe Carton with PalletSpecification150*100*25 and so on.OriginChina, Zibo CityHS Code6909120000 Photo show Ceramic pipe advantages:High hardnessSuperior abrasion Corrosion and chemical resistanceLight weightLow maintenance cost: Super wear-resistance reduce the maintenance frequency and also the maintenance cost.Good fluidity : Smooth surface ensure the free flow of material without blocking pipe sizes :ProductID(mm)OD(mm)Thickness(mm)Length(mm)R(mm)DegreeStraight Tube7610615150-250//Straight Tube10014020305//Straight Tube15018517.5150-250//Straight Tube15218215150-250//Straight Tube20024020305//Bend7610615/4007.5Bend10113115/5005Bend15018517.5/15003Bend15118115/7507.5Qijing Ceramic pipe sizes range : 10~500 mm Specifications alumina content 92959799Al2O3(%)≥92≥95≥97≥99Fe2O3(%)≤0.2≤0.15≤0.15≤0.1Hardness≥8≥9≥9≥9Porosity(%)≤0.02≤0.02≤0.02≤0.01Density(g/cm3)≥3.60≥3.65≥3.75≥3.9Length(mm)≤500≤500≤500≤500MAX ID(mm)≤620≤620≤620≤620Usage1) Thermocouple protections;2) Heat treatment furnace and toughened furnace;3) Inner liner tube and heating tube in electric furnace; 4) Some are used in furnaces.Transport and installation precautions:Matters needing attention for transportation and installation of ceramic pipe1. The ceramic composite pipe has high hardness and good toughness, but it should be put gently in the process of transportation and installation to avoid serious collision, especially to avoid direct contact with metal instruments or impact on the ceramic layer on the end surface.2. The qijing bending pipe is installed with directivity. When the bending pipe is installed, the direction indicated by the arrow on the surface of the bending pipe should be consistent with the flow direction of the conveying medium.3. When installing the pipe, the pipe should be aligned with the center line and level should be adjusted to make sure that both ends meet accurately.The displacement of both ends should be controlled within 1.0mm.4. When the flexible pipe joint is used to connect and install the pipe, the inserted lengths of both ends of the flexible pipe joint shall be adjusted symmetrically.Since the thermal expansion coefficient of the composite pipe is about 1/3 of that of steel, the expansion clearance can be reduced by 3-5mm.5. When using flange connection, the flange end shall be flush with the end of the composite pipe.6. Due to the excellent welding performance of the composite pipe, the pipe connection can be conducted by welding. However, when welding, 45o-60o "V" type slope Angle is 2-4mm and gap is 0.8-1.2mm.Packaging PackagingSizeOrderWeight500KG- Packaging DetailsThe normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request. PackagingSizeOrderWeight1.2 T- Packaging DetailsThe normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.FAQ:Q: Are you trading company or manufacturer ?A: We are factory.Q: How long is your delivery time?A: Generally it is 15 days if the mould sizes are in stock. or it is 25 days if the mould sizes are not in stock, it is according to quantity.Q: Do you provide samples ? is it free or extra ?A: Yes, we could offer the stock sample for free charge but do not pay the cost of freight.Q: What is your terms of payment ?A: For new customers, 50% T/T in advance. For regular customers, 30% T/T in advance ,balance after received the B/L copy.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.