IPDB › China Industry › Industrial Equipment & Components › Other Equipment & Components
Hydraulic Gates Provide Stable Water Diversion for Hydropower Stations or Supply Domestic Water to Towns1
Other Equipment Components, Hydraulic Gate, Elevator Dam
Beijing IWHR Corporation
Preview:
Product Description MaterialCarbon SteelFeatureStore Water Irrigate Landscape Flood ControlDriving ModeHydraulic DriveHS Code84798999Company Profile FAQHow does the hydraulic elevator dam operate? What is the lift time and drop time? Can the water be blocking at any height?The back side of the hydraulic elevator dam is supported by two hydraulic cylinders at a small Angle, powered by the hydraulic station, and the hydraulic oil is used as the medium to make the cylinder rod of the hydraulic cylinder move, so as to realize blocking and discharging flood.The lifting time of single gate is about 1min/m, and the lowering time can be adjusted in 30s-30min.The hydraulic elevator dam can achieve arbitrary dam high water retention. 2. How does the dam work if sedimentation on top of its surface is more than 30 cm?The hydraulic elevator dam is able to withstand severe mud and sand sedimentation. It was specially designed for this purpose. The hydraulic dam may be adjusted up to a vertical angle of 75 degrees. This angle is large enough to completely wash away sedimentation under normal flow conditions. If sedimentation is not completely removed, the remainder will not be significant enough to affect the lifting and the dropping of the dam. 3. What should be done if branches and stones are stuck in the dam?There may be large quantities of floating objects, such as tree branches, plastic bags, etc., which may serve as impediments to the normal operations of the hydraulic dam. Based on the quantity and location of these floating objects, regulation of a single dam or coordination with adjacent dams may be used for tackling this problem. These floating objects will eventually drift away with the help of the water flow. If stones are stuck in between the two dam surfaces, the dam's angle may be adjusted causing stones to be released due to gravity and water flow. 4. Is it possible to lift and drop the dam at the same time?We can custom design the hydraulic pump station to achieve synchronous lifting and dropping of the dam 's surface. Importantly, if the flow and the power of the hydraulic pump are enhanced to accommodate the special needs of customers, the cost of the dam will also increase. 5. Is it possible to operate the dam manually? How much more economical is this option?For areas without electricity, manual control can be achieved, its metal structure is the same as the hydraulic elevator dam, the power is powered by hand pump or diesel engine. For a river with multiple gates, only one mobile diesel engine is needed. Compared to the hydraulic elevator dam, investment will save about 30%-40%.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.