2000X6000mm CE Approved Industrial Carbon Fiber Forming Autoclave (SN-CGF2060)¹

Product Description Applications of SINOMAC Composite AutoclaveThe composite autoclave is a key equipment for hot-pressing shaping of carbon fibers and resin matrix composites. The quality of the product is obtained inside the autoclave reaching an increase of mechanical features up to 20-30% compared to other methods of polymerization. The reliability and the precision of the cycles which can be obtained with our autoclaves, allowing to reach and keep high quality standards of the product, which is widely used in the high-tech fields such as aerospace, automobile, electronics, weapon, traffic, sports equipment and new type of energy, etc.TPC (Thermal Processing Control) SoftwareSINOMAC composite autoclave is equipped with advanced Thermal Processing Control (TPC) system. TPC is a PC-based control solution designed specifically for composite curing in autoclaves. It is developed on the basis of the advanced control systems that come from excellent domestic and overseas manufacturers. It is preferred control system for the most customers. The system has the login of user permissions, parts sensor selection, curing process curve setting, calling, saving and printing, automatic and manual operation, real-time data monitoring, recording, storage and printing, system status monitoring, event alarm, quality analysis,etc.Technical Advantages Of SINOMAC Composite Autoclave1. No annular ductConventional autoclaves have an annular duct that is used to transfer air from the rear of the autoclave to the front. This air duct requires a larger pressure vessel and increase some extra ducting sheet metal .These factors will cause the high energy consumption on heating and cooling, increasing the use cost of customer's. SINOMAC composite autoclave does not require an annular air-duct and instead utilizes the floor as the forward air delivery system. It has a Sieve-Ventilation slots system in the rear and front of the autoclave. This unique design feature reduces the pressure vessel diameter by 100-150mm when compared to a conventional autoclave. This reduction in size and the elimination of the inner air duct reduces operating heating costs, pressurization costs, and equipment price.2. Unique heating and cooling systems under the floorIn conventional autoclaves, the heater and cooling exchanger typically mounted at the rear of the autoclave. This rear-mounted approach requires the autoclave pressure vessel to be up to 1.5m longer to accommodate the components and the transition ducting at least.SINOMAC composite autoclave on the other hand incorporates floor-mounted heaters and cooling exchangers and therefore eliminates the need for the additional vessel length. This feature allows the SINOMAC autoclave's vessel to be much shorter than the vessel used for a conventional autoclave. This positively impacts operational costs by reducing the amount of heating required and the amount of pressurization gas used for a standard cycle.3. Advantage of Sieve-Ventilation slots systemSINOMAC composite autoclave utilizes Sieve-Ventilation slot panels to straighten and balance air flow in the autoclave.Sieve-Ventilation slots are full-area, flow adjusting panels that facilitate the balancing and straightening of the air flow at the front and rear of the autoclave prior to entering/exiting the working volume. Unlike conventional autoclaves, an composite autoclave with Sieve-Ventilation slot technology has no dead-spots and therefore provide near 100% useable volume for your parts. The overall result is unequalled temperature uniformity down the entire length of the autoclave and uniform heating and cooling of your valuable part load.4. Advanced structure of door sealing ringUsing ceramic fiber channel segregation, and a special cooling system.5. Fully sealed circular motor fanFully sealed special motor, bearings with SKF high-temperature series. The structure is easy to maintenance and, no oil leakage, no air leakage.Autoclave Specification MODEL#SN-CGF2060 COMPOSITE AUTOCLAVE_TECHNICAL PARAMETERNo.DescriptionUnitSpecifications and Parameters1Effective Working Diametermm20002Effective Working Lengthmm60003Autoclave Track Distancemm11504Track height (from floor to track plane)mm8505Design PressureMpa1.26Max. Working PressureMpa1.057Max. Pressurization Rate (average)bar/min0.68Max. Depressurization Rate (average)bar/min0.69Safety valve exhaustMpa1.1510Design TemperatureoC25011Max. Working TemperatureoC23012Max. Heating Rate(Air average)oC/min4.513Max. Cooling Rate (Air average)oC/min4.514Thermal load during testKg2050kg steel15Temperature uniformity at steady stateoC±2.516External shell temperature at max. temperatureoC<6017Quick openning Door Mode----hydraulic18Working Medium----Compressed Air19Heating Mode----Electric(Convection+Radiation)20Heater----Inconel tubular heaters21Heating PowerKW19822Quantity of Circulating Fan MotorSet123Power of Circulating Fan MotorKW2224Thermocouple type----Type K or J25Air Temperature ThermocouplesPiece126Part Temperature ThermocouplesPiece1627Quantity of Pressure TransducerPiece128Vaccum LinesPiece829Quantity of Vacuum ProbePiece830PLC-controlled valves on each vacuum line---Vacuum and Vent31Min. Vacuum PressureMpa-0.0832Standard Control Mode---PLC+PC33Control Software---Thermal Processing Control (TPC)34Insulation Type---Internal35Insulation Material---Ceramic fiber36Insulation Thicknessmm10037Insulation Sheet metal---Stainless Steel or Aluminized Steel38Working environment temperatureoCMin. -20oC, max +45oC39Working environment humidity---<60%40Power supply---220/380VAC, 3P+N+PE, 50/60Hz41WeightKg16790Professional WorkshopFrom the SINOMAC Team, with 15 years of experience.

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.