CIPDB › China Industry › Industrial Equipment & Components › Universal Hardware Parts
High Temperature Resistant Nylon Fasteners1
Universal Hardware PartsPVC FastenerConveyor Belt Fastener
Yancheng Goodlark International Trade Corp., Ltd
Preview:
Product Description Product Description Model:0.450.65Suitable for maximum belt thickness1.0mm-2.0mm2.0mm-3.5mmProduct colorwhitewhiteblackWhether the connection pin is includedYesPacking specification5M,10M,15M,20M,30MProduct materialHigh temperature resistant nylon teeth0.7MMPin diameter0.9MMWhether the size can be customizedYes1. MEASURING AND CUT TING THE BEL T To measure the belt length, use a metric measuring tape. The measurement should be done on the belt that is well stretched and straight. A length equal to 25% of belt width should be added to the final length of the belt for the joining purpose.2. PREP ARING THE JOINTCut in diagonal both belt ends, which correspond, to 25% of the belt width. Separate the ply on each end of the belt to a depth of approximately 55mm. Whenever possible, carry out this process by using the ply-separator machine (esbelt LST 150). Remove the bottom step of each end of the belt.The fastener should be placed in a way that the top cover of the belt does not overlap the fastener reinforcement.3. JOINT FUSION Place the belt on the lateral side of the press (see photo), be careful not to deform the plastic fastener with the pressure. Carry out the same operation on the other end of the joint. Refer to the splicing parameters for the corresponding splicing data.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...