T45 T51 Rock Drill Equipment Accessories for Mining Shank Adapter Rock Drilling¹

Product Description HD709-T45-590 Shank Adapter  Code No.: HD709-T45-590 Thread Type: T45 Length: 590mm Rock Drill Type: HD709 Rock drilling tools manufacturer Prodrill produces shank adapters for most models of current prevailing rock drill machines. All Prodrill shank adapters are carburized, CNC manufactured, and made from premium steel. Thus ensure them with superior toughness and anti-fatigue strength to meet the most demanding drilling conditions. Moreover, all shanks could be produced with ether male or female threads if there is actually necessary.HD709-T45-590 Drill Shank Adapter Male shank adapters are generally better suited for drifting, tunneling and extension applications where high bending stresses are present. While female shank adapters are used when the drilling space is limited and the total feed length is important, for example underground roof bolting.The task of the shank adapter is to transmit rotation torque, feed force, impact energy and flushing medium to the drill string (extension drill rods, drifting drill steels). Prodrill shank adapters are there fore designed to with stand the high impact power of modern rock drills and made from specially selected material which also is hardened through cauterizing. Around 300 different shank adapters suitable for different rock drills are currently available from Atlas Copco series drifters, Tam rock series drifters, Garden Diver series drifters etc.  Two flushing options of shank adapters: internal or external- Internal flushing uses a water tube that fits through the center of the drill and into an o-ring seal in the end of the shank, to transfer flushing into the drill string- External flushing, holes or a slot are required in the side of the shank adapter.These line up between seals inside the front head or water box of the rock drill, when the shank is installed. Flushing medium is supplied directly to this device and is introduced into the drill string through the shank- External flushing is considered superior to internal flushing, as greater volumes of flushing agent can be delivered with less risk of leakage and hammer damage from waterThe shanks for hydraulic drills and some pneumatic drills have external or front head flushing. Hydraulic shanks generally have at least 5 to 14-spline configuration,  Pneumatic shanks tend to have internal or through flushing and can generally be identified by their lugs or 4-spline configuration. T38 T45 T51 Thread Shank Adaptor for Top Hammer drill rigShank adaptor or shank adapter, the task of the shank adapter is to transmit rotation torque, feed force, impact energy and flushing medium to the drill string.The shank adapters from Pro-drill are there fore designed to with stand the high impact power of modern rock drills and made from specially selected material which also is hardened through cauterizing. Around 300 different shank adapters suitable for different rock drills are currently available from Atlas Copco series drifters, Tamrock series drifters, Garden Dever series drifters etc.Male shank adapters are ideal for drifting, tunneling & extension application where high bending stresses are present, Female shank adapters are used when the drilling space is limited and the total feed length is important.Main Products:1-12 inch middle-low/high air pressure DTH hammers & bitsBig hole high air pressure DTH hammer using in water well, oil, gas and construction drillingEccentric overburden drilling EquipmentHole opener bitRock thread bit (R22, R25, R28, R32, R35, R38, T38, T45, T51, ST58, GT60)Extension Rod, M/F Rod, M/m Rod, Drift Rod,Shank adapter, coupling sleeves and all kinds of adaptersAdvantages:Compared with the oversea brands, our advantages are bellowing:A. Our products can match over 95% against the original productsB. Price are competitive against the famous brands and best quality against the small factoryAbout Us:1. Our factory has been specialized in manufacturing drilling tools and spare parts for over 10 years.2. We have advanced technology and equipment.3. Our technician has more than 13 year's professional working experience.4. Rock drilling tools are exported throughout the world. Main market: Norway, Turkey, USA, Canada, Australia, Brazil, Uruguay, Iran, Philippines, Thailand, India, etc.Product Name:shank adaptorDescription:shank adaptorShank adaptor is used for transmitting power between drill machine and drill stems.MOQ:No MOQ required for testing and trial orderThread:R32,R38,T38,T45,T51Length:300mm-800mmour shank adaptors are available for :   (COP1238,COP1838,COP1032 etc)(HD715,HD612,HD609,PD200 etc)(VL140,VL671,YH80A etc)(HLX5,HL600,HL500,HL300,HL700,HL850,HL1000,HL1500 etc)

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.