Battery Electric Power Cable Lug Crimping Tool 16-400mm2¹

Product Description ED-400 Battery Powered Cable Crimping Tool with tonnage of 120KN  for crimping range of 16-400mm2 Rated pressure:120knStroke:42mmOil capacity:160mlMax crimping:Cu400mm2/Al300mm2Cycle time:5-8s(CU150mm2)Cycles/charger:Approx.120cycles(CU150mm2)Voltage/capacity:18V/3.0AhCharging time:Approx.1 hourPackage:plastic boxWight incl.battery:4.6kgsCrimping dies:16,25,35,50,70,95,120,150,185,240,300mm2Products Description:Micro computer control systerm-automatically detectes the pressure when in crimping with double safety protectThe tool is equipped with a double piston pump which characterized with a fast approach towards the connecting material andtransfer to high pressure automatically by slow crimpingIf a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a reddisplay flashes.One key control-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully meanspiston return to the original positionA temperature sensor makes the total stop working automatically whenthe temperature is over 60oC under long time working, thefault signal sounds, it means the tool can't continue to work until temperature reduced to the normal  

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.