Cold Rolling Mill/ Galvanizing Line / Color Coating Line / Coating Thickness Gauges¹

Product Description Product DescriptionCoating thickness gauge, which is composed of intelligent "0" scan frame, X-ray sensor, operation station, control software, LCD display and other parts. The system realizes automatic online detection of the weight of the upper and lower coatings of the strip steel. The detection data can be transmitted to the upper computer through protocols, point-to-point and other methods, and can participate in the control of the upper computer, so that the production operators can timely and accurately Understand the quality of current production products; and can print production records and reports at any time.Technical Performance* Main Specifications1. Coating tested: pure zinc, zinc aluminum magnesium, aluminum zinc silicon (normal spangle, small spangle, large spangle, no spangle)2. Coating weight detection range: 5g/spm-300 g/spm (each side) 3. The number of sensors: 2 (one for each) 4. Radioactive source type: X-ray source, 30 kV 5. Detection type: ionization chamber 6. Sampling time: 1ms (time interval for collecting data information7. Repeatability/Measurement accuracy:WeightError20g/spm±0.1g/spm50g/spm±0.13g/spm100g/spm±0.2g/spm150g/spm±0.46g/spm200g/spm±1.0g/spm250g/spm±2.0g/spm300g/spm±3.0g/spm8. Stability: ± 0.13%/8h(100g/ spm )9. Digital sensitivity: 0.1 g/ spm10. Standardized frequency: 0-24h11. Standardization time: about 10s12. The time required for the initial temperature rise to reach thermal equilibrium under cold start: about 60min*  Stability ≥99.9% Within one year, the stability ≥99.9% usability test will start after the warm-up commissioning is successful, and the line will run under stable production conditions. The test will be completed by the buyer's well-trained technicians under the supervision of Jingruida. The acceptance test should last for ten days (240 hours) 100% Scope of Supply No.Part NameDescriptionQtyUnitFactory1Server lntel(R)Core(TM) I5-10500 CPU 3.10GHZ 8.00GB Memory (including thickness gauge software)1 PCS Dell 2LCD display 23.6-inch display, showing the software picture of the thickness gauge 1PCS Dell 3Remote display 43-inch LCD display shows the actual weight and total weight of the upper and lower sensors 1PCS  4SMPS OUT DC 24V5PCS 5Filter AC250V10A-C20K032B 115/250V50/60Hz 10A, (Input voltage filtering) 1PCS  6PLC controller S7-200 SMART 1PCS SIEMENS 7Analog input module EM AE041pieceSIEMENS8Communication module 5650 network communication module 1pieceMOSA9Drive motor RF27DRS71M48EI 0.55KW1piece SEW10Frequency converter 6SL32105BB175UV11pieceSIEMENS11Encoder RVI58N-011K1R61N-010241piecePepperl+Fuchs 12Ionization chamber Contains ionization chamber and sealed housing imported from the United States 2 pieceAmerica13Acquisition magnifying board Bias high voltage module and signal amplifier circuit 2pieceAmerica14X-ray tube X-ray tube imported from the United States, sealed shell with water cooling function 2 piece America15  High voltage power supplyHigh-voltage control board imported from the United States, supporting communication interface device 2pieceSpellam16Water cooler Cooling the ray source, sensor and shell, adopting air-cooling method 1piece Angus17Coated frame Including scanning track, water pipeline, warning light, two sets of measuring strip steel coating thickness sensors, to achieve simultaneous measurement of coating weight 1set  Detailed PhotosCertifications You are warmly welcomed to visit our workshop.Moran Machinery are looking forward to your cooperation.Liu Huan (Tony Liu)Our website: Moranchina.en.made-in-china.com 

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.