CIPDB › China Industry › Tools & Hardware › Welding & Soldering Supplies
Direct Current (DC) , Copper-Coated, Carbon Electrodes Are Used for Arc Gouging, Carbon Arc Gouging Rod1
Welding Soldering SuppliesCopper-CoatedCarbon Electrodes Are Used for Arc GougingCarbon Arc Gouging RodCarbon Arc Gouging RodArc Gouging Rod
Hebei Xingshi New Material Technology Co., Ltd
Preview:
Product Description We are FACTORY , We do Retail with better price , We do Wholesale with Best Price . Product Advantages:Product DescriptionCARBON GOUGING ROD COPPERCLAD ELECTRODE / CARBON ARC GOUGING ROD Applications - Fabrication / Maintenance / Farms / Repair ShopsCurrent Type - D.C. (Direct Current)Operating Polarity - DCEP (Direct Current Electrode Positive) - Reverse PolarityElectrode Size -4mm-20mm * 305mm/355mm/400mm/455mmAmperage Capacity - 300 - 400 ampsPieces per Carton - 50 pieces/ Customized/ OEM LABELLINGI, OverviewThe carbon arc air gouging is to take the carbon rod as the electrode, use the high temperature generated by the carbon arc to melt the metal to be planed, and then blow off the molten liquid metal through the movement of the carbon arc gun, the short arc operation of the carbon rod, and the compressed air effect of the carbon arc gun nozzle to plane out a groove to achieve the purpose of gouging. Carbon arc gas cutting is to cut metal materials with carbon arc air gouging, that is, thin materials can be cut with one air gouging, and thick materials can be cut with multiple air gouging.2} Characteristics of carbon arc air gouging1. The carbon arc air gouging is much more efficient than the air shovel. It is suitable for working in all positions, especially in the elevation and vertical positions!2. It is easy to observe and find all kinds of defects in time in the process of cleaning welding root and reverse repair welding seam planing.3. The carbon arc air gouging can be used in narrow positions and in places where it is difficult to use other planing tools. It is flexible and convenient, and the quality is guaranteed.4. Carbon arc air gouging can be used to plane and cut some metals that cannot be cut by oxygen acetylene, such as cast iron, stainless steel and non-ferrous metals.5. The diameter of carbon rod is generally 6-30mm, and the cutting seam is wide, which is a bit wasteful; And narrow slots and slots cannot be realized.6. When cutting some metal materials, it will cause carburization in the heat affected zone and increase the quenching and hardening sound at the cutting groove.7. The cost of DC power supply is high.8. A large amount of smoke and dust will be produced in the process of planing and cutting, especially when working in a place with poor ventilation, which will cause certain damage to the operator. D. C. Copper Coated Air Arc Gouging Carbon ElectrodesAir Carbon Arc Gouging Electrodes removes metal by utilizing the intense heat of the arc between the carbon-graphite electrode and the substrate to melt material that is subsequently removed from the work area by a jet of air. By controlling the angle of the electrode, the depth of the gouged area can also be controlled. Caution: ? Electrodes must be kept dry. Wet electrodes can flake, or splinter and are dangerous. If electrodes become wet, bake at 300°F for 10 hours before using. Product Parameters DC Pointed Gouging RodDiameter * Length ( mm )Diameter * Length ( inches )Current Range ( A )3.2*3051/8*12'130-1804*305(355)5/32*12'(14')150-2005*305(355)3/16*12'(14')200-2506*305(355)(400)(455)(510)15/64*12'(14')(16')(18')(20')15/64*12'(14')(16')(18')(20')6.5*305(355)1/4*12'(14')320-3707*3559/32*14'350-4008*305(355)(400)(455)(510)5/16*12'(14')(16')(18')(20')400-4509*305(355)23/64*12'(14')450-5009.5*305(355)3/8*12'(14')500-55010*305(355)(400)(455)(510)3/8*12'(14')(16')(18')(20')550-60011*305(355)7/16*12'(14')600-65012*305(355)15/32*12'(14')750-85012.7*305(355)1/2*12'(14')800-100013*305(355)1/2*12'(14')800-100016*305(355)5/8*12'(14')1000-120019*305(355)3/4*12'(14')1200-1400 DC Jointed Gouging RodDiameter * Length ( mm )Diameter * Length ( Inches )Current Range ( A )8*355(430)(455)5/16*14'(17')(18')500-55010*355(430)(455)3/8*14'(17')(18')600-65011*355(430)7/16*14'(17')650-70012*355(430)15/32*14'(17')700-80013*355(430)(455)(510)1/2*14'(17')(18')(20')800-100016*355(430)(455)(510)5/8*14'(17')(18')(20')1000-120019*355(430)(455)(510)3/4*14'(17')(18')(20')1200-140025*4301*171400-1600 DC Flat Gouging RodsDiameter * Length ( mm )Diameter * Length ( Inches )Current Range ( A )3X25X3551/8X1X14300-3504X12X355/3055/32X15/32X14/12200-2505X10X355/3053/16X25/64X14/12300-3505X12X355/3053/16X15/32X14/12350-4505X15X355/3053/16X19/32X14450-5505X18X355/305/4303/16X45/64X14/12600-7005X20X355/305/4003/16X25/32X14/12700-8005X25X355/400/4553/16X63/64X14/16800-9006X20X355/30515/64X25/32X14/12750-850 Various Type , Accept Sample order or Retails in Cartons !!!! Our Advantages Excellent Arc StabilitySuperior Metal RemovalClean and Uniform CutFlexible ProcessMost EconomicalGood Quality and PriceFast deliveryEasy to operate,Widely application scalesGood effects and economicalStrong anti-oxidizes, Low electric resistance raceApplication Machining U-Grooves for weld joint preparationRemoving defective weldsCleaning and repairing metal castingsRemoving hard surface metal to facilitate repairCutting non ferrous and other "hard to cut" metal Carbon SteelStainless SteelFerrous AlloysGray, Malleable and Ductile IronAluminiumNickelCopper AlloysOther Non-FerrousRough machiningProcess Requirement D.C Power SourceGouging Carbon RodGouging TorchCompressed Air, 8-10Kg/cm2Composition of carbon arc air gouging (cutting) equipment1. DC power supply: any type of manual arc welding machine can be used as the power supply for carbon arc gouging and cutting; Usually, large capacity DC welding machine (>400A) can be used, or two welding machines can be used in parallel.2. Air pump: It is required that the air pressure shall not be less than five atmospheres, and the pressure shall be stable, with a large air output (> 0.36L/min)3. Carbon rod: generally, copper plated solid carbon rod is used, and its section shape can be round or flat. The flat carbon rod groove is wider than the plot groove and is suitable for large plane planning. It is required to have high temperature resistance, good conductivity, not easy to break, fine section structure, less ash, low cost, etc. Common round specifications: φ three × 355~ φ sixteen × 355; Flat size: 3 × eight × 355~6 × twenty × three hundred and fifty-five4. Carbon arc air gouging Torch: it has two types of carbon arc air gouging guns: circumferential air supply and side air supply. At present, the side air supply air gouging gun is widely used, which is characterized by high production efficiency, good quality, less electrode burning loss and convenient operation. The requirements for carbon arc air gouging gun are: good conductivity, powerful and accurate air supply; The carbon rod can be clamped firmly, adjusted and replaced flexibly and conveniently; Simple structure, light weight and convenient operation. The shell insulation is good. Detailed Photos Features 1. Synthetic graphite composition extends electrode life to maximize metal removal2. Full copper coating improves arc stability and reduces heat generation3. Consistent melt-off rate for smooth, uniform grooves4. High density formula increases durability5. Used primarily in automatic gouging applications but can be used manually.6. Typical applications include large, long duration gouges commonly seen in the shipbuilding or foundry industries and circular gouges on pipes and tanks7.One year manufacturer's warranty8. CUSTOMIZED DIAMETER AND LENGTH . DC POINTED GOUGING ROD , DC JOINTED GOUGING ROD , DC FLAT GOUGING ROD ONLINE MESSAGE , WILL ANSWER YOU WITHIN 24 HOURS WITH OUR EMAIL AND WHATSAPP https://xingshi2019.en.made-in-china.com/contact-info.html
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...