Environmental Salt Spray Fog Test Chamber Cyclic Corrosion Test Equipment¹

Product Description Product DescriptionProduct Usage     The salt spray test machine is designed for the surface treatment of various materials, including paint, electroplating, organic and inorganic coatings, anodizing, anti-rust oil and other anti-corrosion treatments to test the corrosion resistance of their products.Features     1. The use of the new intelligent salt spray test machine and the printed circuit board solves the problem that the relay circuit of the old salt spray test machine is prone to line failure.2. The temperature sensor uses the original Japanese imported digital sensor chip, which will not decay after ten years of use. The old models mostly use PT-100 and K type. With the extension of the service life, most of the sensors will be inaccurate. If calibration is not used If it does, it will cause great harm to the test.3. The new salt spray testing machine integrates programmable, continuous/interval spray, manual/automatic mode. With this collection of multiple modes, it can basically meet all current standards for salt spray testing machines, so that customers don't have to worry about the selection of salt spray testing machines.Salt spray test chamber standard     1. GB/T 2423.17-1993 salt spray test2. GB/T2423.18-2000 salt spray test3. GB/T 10125-1997 salt spray test4. ASTM.B117-97 salt spray test5. JISH8502 salt spray test6. IEC68-2-11 salt spray test7. IEC68-2-52 1996 salt spray test8. GB.10587-89 salt spray test9. CNS.4158 salt spray test10. CNS.4159CASS accelerated copper acetate salt spray test11. GB/T 12967.3-91 CASS accelerated copper acetate salt spray test Product ParametersModelHJ-60HJ-90HJ-120HJ-160HJ-200Chamber size in test chamber WxDxH(cm)60x45x4090x60x50120x100x50160x100x50200x100x60Test outdoor box size WxDxH(cm)107x60x118141x88x128190x110x140230x130x140270x150x150Laboratory temperatureSalt water test method (NSS ACSS) 35oC ± 1oC/ Corrosion resistance test method (CASS) 50oC±1oCPressure barrel temperatureSalt water test method (NSS ACSS) 47oC ± 1oC/ Corrosion resistance test method (CASS) 63oC+1oCBrine temperature35oC±1oC   50oC±1oCSalt water tank capacity15L 25L 40L Brine concentrationAdd 0.26 g of copper chloride (CuCI2 2H2O) per F liter of 5% concentration of yue chloride solution or 5% concentration of vaporized copper solutionCompressed air pressure1.00±0.01kgf/cm2Spray volume1.0~2.0ml/80cm2/h (collect at least 16 hours, take the average value) The relative humidity of the laboratory is above 85%Laboratory capacity108L 270L 480L 800L 1440LProduct Show

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.