Multi Directional Ert Cable for Ground Water Exploration¹

Product Description Multi directional ERT cable for ground water exploration is specially made to be used for electrical resistivity tomography, deep resistivity measurements, self potential and induced polarization(IP) measurements. It is usually work with multi-electrode resistivity instruments and switch boxes for Groundwater exploration, geotechincal investigation, monitoring of dams and dikes, environmental studies, geological survey, mineral prospecting, archaeology, detecting of cavities and buried ojbects, underwater, boreohole and cross-hole measurements.- Ideal for automatic transfer of multi-electrodes.- Lighter weight but maintaining the same low noise level.- Robust design, strong mechanical strength and good insulation performance.- Compatible with all main stream resistivity meter, resistivity system and devices: ABEM, ARES, GDD, IRIS SYSCAL PRO, PASI RM1 Earth  Resistivity Meter and etc.- Waterproof electrode takeout (Rainfall/ Shallow Water / Submersible optional )- 10-electrodes / 11-electrodes / 12-electrodes / 16-electrodes/ 18-electrodes/ 21-electrodes/ 24-electrodes / 28-electrodes / 30-electrodes/ 32-electrodes / 42-electrodes / 48-electrodes / 56-electodes are optional.-  Customized electrode numbering, section size, take-out type and spacing is available upon request.Structure of Cable Conductor (Per core)7nos.of Bare Copper Wires Stranding(Copper Wire O.D. 0.12mm)Numbers of Cable Conductors- Standard 32 conductors(16x2x7/0.12)- Customized cable conductors are available as per client's requests.Electrode cable take-outMolded cable take-out in the color of red or blue.Cable Jacket 7.2mm OD with color of orange.Min. Breaking Strength 130 kgs.Working Temperature -40oC~+70oC Insulation Resistance≥1000 MΩ/kmCross Section (Per core)0.08mm2DC Resistance(20oC)≤234Ω/kmVoltage Withstand Value (Per core)1000VCurrent-Carrying Capacity per core(constant current)≤1A Channel Numbers 21-channel (AB line) / 28-channel / 30-channel / 32-channel / 42-channel / 56-channel optional.Custom electrode numbering available upon request.Cable Outer Diameter7.2mm / 9.2mm availableConnector Type27-pin Connector / 32-pin Connector50-pin Connector / 55-pin Connector60-pin Connector / 61-pin Connector Connector Lead-in type4m / 5m / 7m / 10m / 12m cable lead-in at one end or both ends.Custom cable lead-in length available upon request.Electrode take-out Split spring take-out / molded split spring take-out / Mueller clip take-out / KCK take-out / Kooter take-out / wire-wound take-out / encapsulated stainless electrode take-out optionalElectrode Spacing3m / 5m / 6m /10m / 20m optional.Custom takeouts spacing available upon request.Working Temperature-40oC ~ +70oC 

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.