CIPDB › China Industry › Instruments & Meters › Test Instrument
0-10m Depth Underground Cable Pipe Locator with Audio Frequency Step Voltage1
Test InstrumentUnderground Pipe LocatorCable Route Tracer
Xian XZH Electric Power Technology Co., Ltd.
Preview:
Product Description Product DescriptionUnderground Cable Pipe LocatorTransmitter frequency: from 815Hz-83KHz(4 kinds)Output power: maximum 10WOutput current: 0~2A Battery model: rechargeable lithium batteries Receiving frequency: Detection frequency from 815Hz-83KHzPassive frequency: 50Hz, radioDepth measurement: 10 metersPositioning accuracy : Low frequency: ±(1-5)%≤2.5m Radio frequency: ±(5-12)%≤2.5mMaximum detection distance: The cable with good insulation in the direct connection method can reach up to 15km. XHGX507 underground cable pipe locator is mainly used for cable fault location, cable identification, cable path and depth measurement. It can complete tasks that could only be accomplished by a few sets of instruments in the past.Detailed Photos Features* The large-screen LCD displays the signal strength, and the bar, arrows and voice prompts make it easy for the operator to judge the underground position of the cable and the fault point. One person can do it all.* All-digital design, clear large-screen LCD graphic display and reliable positioning* Portable and lightweight, easy to carry* Built-in rechargeable battery* Built-in ohmmeter to measure cable loop resistance* Can be used to detect insulation faults up to 2MΩ to ground* With backlight function to adapt to night operation* Built-in ohmmeter to measure cable loop resistance* Display cable depth and currentProduct ParametersTransmitter:Working frequencylow frequency (815Hz), intermediate frequency (8kHz), high frequency (33 kHz), radio frequency (83 kHz)Working modedirect connection method, coupling method (caliper method), induction methodMatching load5 ohms-3000 ohmsImpedance display5 digitsOverheating and over currentautomatic protectionPower outputlow gear, middle gear, high gearReceiver:Working frequencylow frequency (815Hz), intermediate frequency (8kHz), high frequency (33 kHz), radio frequency (83 kHz), Passive frequency 50HzAntenna modevalley method (zero value mode), crest method (peak mode), step voltage method and clamp current method (A-frame)Current indicationdisplay the effective current value of the cable under test (unit: mA)Working temperature-10oC+55oCPower indicatorgraphic displayBattery lifecontinuous work> 8 hours: intermittent work> 16 hoursSignal strength indicationladder diagram, digital range 0-999Gain controlmanual adjustment, dynamic range of 100dBDetection depththe maximum detection depth is around 10 metersMaximum detection distanceThe cable with good insulation can be up to 15km in the direct connection methodDepth measurementpress the depth key to display three digits, the maximum depth can be measured up to 10 metersAccuracyLow frequency: ±(1-5)%≤2.5m Radio frequency: ±(5-12)%≤2.5m On-site test Our customersCompany Profile
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...