Large Touch Screen Circuit Breaker Timing Test Equipment High Voltage Switch Gear Analyzer¹

Product Description Product DescriptionZC-300B circuit breaker analyzer can be used to test and measure the mechanical characteristic parameters of high voltage switch ( such as vacuum, six fluoride, less oil, oil and other power systems. The measurement data is stable, strong anti-interference ability, can be in the 500KV level and below the power station to do experiments, wiring is convenient, simple operation, is the most convenient tool for high-voltage switch maintenance test.Product FeaturesThe instrument can automatically identify the fracture opening and closing state, and according to the reference state corresponding to the fracture tip and operation.Independent 12 fracture, can detect and indicate the connection state of the fracture, facilitate the user to check the wiringThe tester can store 50 groups of test results.Large touch screen LCD display, advanced gray screen, without reflection or black in the sun, and English characters graphic menu.Operation tips, user-friendly menu interface, easy to operate.The instrument has powerful function of graphic analysis, and the waveform and measurement data are displayed on the same screen.The utility model has the function of time delay protection, and the coil voltage can be automatically cut off after the circuit breaker is operated.The instrument can be divided into electric and manual test.For high and low voltage test, automatically find the lowest open or closing voltage.Reclosing test, can do parameters test for open-closing, closing-open and open-closing-open etc.Vacuum contactor (Single coil) parameter measurement.Product Parameters1. Time measurement:     12 natural switching (closing) time     The opening (closing) phase is not at the same time     The difference between different periods of switching (closing)     Closing (opening) Bouncing time (number of bounces)     Internal trigger test range: 0.01ms ~ 10000ms, resolution: 0.01ms,     External trigger test range: 0.01ms ~ 200000ms,     Resolution within 999ms: 0.01ms,1000-9999ms: 0.1ms, and over 10000ms: 1ms.     Accuracy within 200ms: 0.05%±1 word 2. velocity measurement : instant separating (instant closing) velocity     Appointed time slot( stroke segment or angle segment) average velocity 3. velocity measurement range: 1mm sensor 0.01~25.00m/s,     0.1mm sensor 0.001~2.50m/s    0.5°angle sensor 1 cycle/ 0.5° 4. Travel measurement: Travel of moving contact (travel)     Contact stroke (open distance)     Over travel     Overshoot or rebound stroke 5. Measuring range:     linear sensor: 50mm     measuring range: 0-50mm     resolution :0.1mm     Optional 100-1000mm linear sensor of any length     Encoder: 360. Rotate sensor, measurement     range: 0-1000mm, resolution :0.25. 6. Current resistance range: the maximum current 30 A, resolution: 0.01 A, 1000 Ω resistance,     resolution: 0.01 Ω. 7. Instrument power supply: AC 220V ± 10%; 50 Hz ± 10% 8. DC power output: continuously adjustable DC20 ~ 270V, DC110V≤30A (short time), DC220V≤     20A(short time). Power: 4400W. 9. External trigger voltage: AC/DC10-300V, current ≤120A 10. disconnecting switch measurement range     (1) Voltage output: DC20~270V(adjustable)     (2) Current output time: 0.01~10 s (settable)     (3) Fracture signal maximum acquisition time: 10s     (4) Measurable fracture closing, separation time, three-phase in synchronism , bounce time          and frequency . 11. mainframe volume : 36×26×17cm 12. operating environment: -20oC~+50oC 13. relative humidity: ≤90% Packaging & Shipping  

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.