CIPDB › China Industry › Instruments & Meters › Geographic Surveying Instrument
Sam-20 One Channel 3 Sensor 4G Flash Storage Blast Vibration Monitor Systems1
Geographic Surveying InstrumentBlasting Vibration MonitorBlast-Monitoring
Beijing Samyon Instruments Co., Ltd.
Preview:
Product Description Product DescriptionSAM-20 Blasting Vibration MonitorSpecificationBlasting vibration Monitor satisfies all the needs of blasting vibration recording happened in the engineering projects of construction, mining, bridge, tunnel, roads and so on. Consultants equipped it as a must for blasting affection estimation as well as people works in the seismic institutes or related universities.AuthoritativeIn order to accuracy measurement data, it has not only CMC logo that can prove test and measurement are legitimacy, but also passed the test by national vibration laboratory.Portable You can use it easily for setting, collecting or reading event, because it has LCD, keypad, battery and SD card.UsabilityYou can use the waveform recording mode to collect vibration signals without any setting after the boot, then itwil1 record events automatic cycle. Technical Advantages1. WIFI connection can realize remote monitoring.2. All 3 speed sensors in one make cable setting easy.3. A/D resolution reaches 24 bit, which makes waveform smooth and precise.4. 8-keytactile keypad drives simple menu operations.5. Without any setting in automatic mode.6. Used fully transition away from compute. System24 bit A/D quantization precision1/16777216Channel3 channelsRangeSpeed:0.0001-35.5cm/s Frequency: 1-500HzAccuracyPrecision for acquisition: 5%Work patternAutomatic or manualRecord length1-200 sec or adaptationRecord modeContinuousSample rate1-50 KHz adjustablePC interfaceWIFI and Rj45Storage4G flashLCD screen3.5 inches LCDClock precision≤5sec per monthWorking temperature-10°F~ 75°FBatteryRechargeable sealed lithium cell, capacityfor24 hours of continuous working SY-6360 Ultrasonic Crosshole Pile Testing SystemApplicationThis instrument is specially designed to detect the completeness of foundation piles by acoustic-transmission method.StandardASTM D6760SpecificationTechnical code for testing of building foundation piles JGJ 106-2003Technical specification of Dynamic pile tests for Highway Engineering JTG/TF81-01-2004Technical specification for inspection of concrete defects by ultrasonic method CECS21:2000Technical specification for detecting strength of concrete by ultrasonic-rebound combine method CECS 02:2005Code for investigation of geotechnical GB50021-2001PurposeTesting of building foundation piles by cross-hole sonic logging;Inspection of concrete defects by ultrasonic method, such as uncompacted, cellular, hole area.Detecting strength of concrete by ultrasonic-rebound combine methodDetecting strength of concrete crevice by ultrasonic-rebound combine methodDetecting defects of one hole by one trigger two receivesTesting dynamic performance of geotechnical investigation, rock, concrete etc SpecificationChannel2/3/4Transmitted pulse width20usMain ControllerARM A8 1GHZ 16GBandwidth2~500kHzSampling modeSynchronous samplingReceiving sensitivity<=10μVSonic time range2*106μsInterchannel crosstalk=<60dBRecord length0.5~4kPower supplyLi battery,can work more than 8hoursFirst wave judging methodIteration/Threshold methodWorking temperature-10oC~+45oCGain Dynamic Range107dBWIFI communicationtime=<1s/Distance=<100mGain accuracy0.4dBSampling interva5cm ~ 100cm selectableSections1/3/6Max pulling speed60m/minute Other Product SY-8360 Ultrasonic Drill Hole MonitorApplicationTesting the drillhole and groove quality of the railway, highway, sea port and other high buildings.StandardDGJ32/J 21-2009DB 29-112-2004T/CECS 596-2019T/CECS 597-2019JTG/T 3512SpecificationProbe Size104*104*300mmWinch Size800*500*390mmProbe Weight14kgWinch Weight65kgTest Depth100m/150m,resolution=<5mm, accuracy =<0.1%Test Range300mm~11000mm(hole diameter), mud ratio =<1.4g/cm3Lifting Speed0-20m/min,adjustableUltrasonicFrequency 83KHz,transmit voltage 1000VPower SupplyAC 220V 50Hz / Li batteryWorking Temperature-20oC~+80oC Sediment Thickness TesterApplicationUsed to test the sediment thickness of the bored pile holeStandardDGJ32/J 21-2009DB 29-112-2004T/CECS 596-2019T/CECS 597-2019JTG/T 3512 SpecificationApplicationStandardUsed to test the sediment thickness of the bored pile hole DGJ32/J 21-2009DB 29-112-2004T/CECS 596-2019T/CECS 597-2019JTG/T 3512Used to test the sediment thickness of the bored pile hole DGJ32/J 21-2009DB 29-112-2004T/CECS 596-2019T/CECS 597-2019JTG/T 3512Used to test the sediment thickness of the bored pile hole DGJ32/J 21-2009DB 29-112-2004T/CECS 596-2019T/CECS 597-2019JTG/T 3512Used to test the sediment thickness of the bored pile hole DGJ32/J 21-2009DB 29-112-2004T/CECS 596-2019T/CECS 597-2019JTG/T 3512Used to test the sediment thickness of the bored pile holeDGJ32/J 21-2009DB 29-112-2004T/CECS 596-2019T/CECS 597-2019JTG/T 3512Used to test the sediment thickness of the bored pile holeDGJ32/J 21-2009DB 29-112-2004T/CECS 596-2019T/CECS 597-2019JTG/T 3512Used to test the sediment thickness of the bored pile holeDGJ32/J 21-2009DB 29-112-2004T/CECS 596-2019T/CECS 597-2019JTG/T 3512 Company Profile
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...