CIPDB › China Industry › Instruments & Meters › Demonstrational & Teaching Utensil
Double Sides Electro Pneumatic Trainer Teaching Equipment Educational Training Equipment1
Demonstrational Teaching UtensilElectro Pneumatic TrainerPneumatic Trainer
Jinan Should Shine Didactic Equipment Co., Ltd.
Preview:
Product Description ZMP2102 Double Sides Electro Pneumatic Trainer Teaching Equipment Educational Training Equipment1. IntroductionElectro pneumatic trainer is designed for "hydraulic and pneumatic training", it meets modern pneumatic transmission requirement. Students can learn basic pneumatic circuit control knowledge, and practice hand on ability. Pneumatic trainer combines electrical and mechanical transmission knowledge.This trainer is suitable for colleges, engineer university, technical schools, vocational schools, engineer training centers, factory training department etc.Through this trainer, students can master pneumatic components structure, pneumatic circuit control theory, pneumatic circuit design, and hand on ability for pneumatic trainer.This trainer is flexible and students can design their own pneumatic circuit.II. Basic structure Pneumatic control experiment workbench including experiment workbench, experiment shelf, pneumatic components etc.Pneumatic components and real equipment: air filter, decrease pressure valve, service unit, hand-operated direction valve, pneumatic control direction valve, strike valve, check valve, throttle valve, exhaust valve, single acting cylinder, double acting cylinder etc.All PLC program software is teaching edition=crack edition=free edition.A. Improvement on trainees' familiarization of the principles and applications of various air pressure components.B. Demonstration of air-pressure loop design.C. Training of PLC programming,including architecture, instructions and ladder diagram. *(2) Pneumatic WorkbenchA. It is designed to be flexible to satisfy individual's needs.B. A complete workbench mainly consists of 3 parts :(a) Electro-Modules Frame(b) Working Board (double side)(c) Working Table (single or double side)C. The combinations of the workbench can be modified based on different lab requirement.D. A complete workbench allows customers to carry out all listed pneumatic experiments. In PART I and PART II, pneumatic components are powered byAir Supply Unit and operated on Working Board area through connected Air Hose.E. In PART III, the electrical components mounted on Electro-Modules Frame are linked to the pneumatic system through Connecting Lead and powered by Air Supply Unit.F. End user are also welcome to adopt Programmable Logic Controller (PLC) forimplementation of PART III. That means Programmable Logic Controller Trainer is an alternative to Electro-Modules Frame and a corresponding electrical device.(3) Electro-Modules Frame (Excluding Electrical Components)A. A cabinet frame is available for mounting electrical components on either side.B. This steel frame can accommodate up to 15 electro-modules at least.C. Size: minimum 1260 mm(W) x 250 mm(D) x 360 mm(H) ±10%(4) Working BoardA. Double-side aluminum grooved panel - minimum 1260 x 750 mmB. A working surface up to 1200 x 700 mm(5) Working TableA. Single-side worktable in size minimum 1300 mm(W) x 700 mm(D) x 850mm(H)±10% Drawer units in steel with one flat drawer and four largedrawers that can be loaded up to 20 kg per drawer.B. Double-side worktable with minimum 1300 mm(W) x 800 mm(D) x 850mm(H)±10%Two drawer units in steel with one flat drawer and four large drawers that can be loaded up to 20 kg per drawer. ?C. The drawers with different rollers that feature an easy-gliding system for smooth running andAdditional breaking.(6) Reed SwitchA. Operating voltage : minimum 24 VDCB. Max. current: 100 mAC. Frequency range: 3 - 250 Hz(7) Connecting Lead HolderA. Mobile type, with 5-foot tubular and 5 castersB. Height: minimum 1400 mm, iron plate suitableC. with minimum 20 connecting leads slots(8) Pneumatic ComponentsA. Air Service Unit(a) Filter-Regulator-Lubricator (FRL) assembly(b) Adjustable pressure: 0 - 9.9 kg/cm2(c) Sliding exhaust valve mounted(d) Filtration: minimum 40pmB. Pressure Gauge(a) Operating pressure: 0 -10 kg/cm2(b) Gauge size: minimum 1.5 inch.C. Air Manifold(a) Check connector for 04 plastic tubing 6ea Connector size : 1/4 inch(b) Operating pressure: minimum 0-12 kg/cm2D. Single-Acting Air Cylinder(a) Cylinder internal diameter: minimum 32mm Stroke length : minimum 150 mm(b) Operating pressure: 1.6 - 9..0 kg/cm2E. Double-Acting Air Cylinder(a) Cylinder internal diameter: minimum 32mm Stroke length : minimum 150 mm(b) Operating pressure: 0.4 - 9.0 kg/cm2(c) Air cushionF. 3/2-Way Directional Control Valve(a) Single air operated, spring return(b) NC type(c) Flow rate: minimum 200 l/min(d) Operating pressure: 1.5 - 8.0 kg/cm2 (e) Max, pressure: 10.5 kg/cm2G. 5/2-Way Directional Control Valve(a) Single air operated, spring return(b) Flow rate: 200 l/min(c) Operating pressure: 1.5 - 8.0 kg/cm2(d) Max. Pressure: 10.5 kg/cm2H. 5/2-Way Directional Control Valve(a) Double air operated, air return(b) Flow rate: minimum 200 l/min(c) Operating pressure: 1.5 - 8.0 kg/cm2(d) Max. Pressure: 10.5 kg/cm2I. 5/2-Way Single-Solenoid Valve(a) Solenoid voltage: minimum 24 VDC(b) Single solenoid operated, spring return, with LED(c) Operating pressure: 1.5 - 8.0 kg/cm2(d) Max. Pressure: 10 kg/cm2J. 5/2-Way Double-Solenoid Valve(a) Solenoid voltage: minimum 24 VDC(b) Double solenoid operated, with LED Operating pressure: 1.5 - 8.0 kg/cm2(c) Max. Pressure: 10 kg/cm2K. 3/2-Way Pushbutton Valve(a) Spring return, flat type, NC type(b) Operating pressure: 0 - 8 kg/cm2(c) Max. Pressure: 10 kg/cm2L. 3/2-Way Manual Valve(a) Spring return, 2-position selector(b) Operating pressure: 0 - 8 kg/cm2(c) Max. Pressure: 10 kg/cm2M. 3/2-Way Manual Valve(a) Spring return, push & lock NO type(b) Operating pressure: 0 - 8 kg/cm2(c) Max. Pressure: 10 kg/cm2N. 5/2-Way Pushbutton Valve(a) Spring return, flat type(b) Operating pressure: 1.5 - 8.5 kg/cm2(c) Max. Pressure: 10 kg/cm2O. 3/2-Way Roller Valve(a) Unidirectional(b) Operating pressure: 0 - 8 kg/cm2(c) Max' pressure: 10 kg/cm2P. 3/2-Way Roller Valve(a) Bi-directional(b) Operating pressure: 0 - 8 kg/cm2(c) Max. Pressure: 10 kg/cm2Q. OR Valve (Shuttle)(a) OR logic(b) Operating pressure: 0.2 - 9.9 kg/cm2R. AND Valve (Dual-Pressure)(a) AND logic(b) Operating pressure: 0.2 - 9.9 kg/cm2S. Quick-Exhaust Valve(a) Pilot type,T. One-Way Flow-Control Valve(a) Adjust: 10-turn, with speed controllerU. Sequence Valve(a) Operating pressure: 1.5-8 kg/cm2V. Time Delay Valve(a) Operating pressure: 2 - 8 kg/cm2(b) Time delay: 0.1 - 30 sec(c) Min. reset time <0.1 secW. Pressure Switch(a) Operating pressure: 1.5 kg/cm2(b) Max. Voltage/current: 250 VDC/0.25A(c) 125 VDC/0.5AX. Air Hose(a) Inner / outer diameter: 2 mm/4 mm Length : 25 MY. Connecting Lead(a) Lead diameter: minimum 4 mm, Length :0.25M, 0.5M.1M(b) Color: red, yellow, blue etc. 1 set: 60 pcs or aboveZ. Limit Switch(a) Roller lever type(b) Contacts: NO, NC.AA. 3-Way Distributor(a) Connector for 04 plastic tubing 6ea(b) Connector size: % inch.(9) Electrical ComponentsA. DC Power Supply(a) Input voltage : 100 - 240VAC/1.7 A Output voltage : minimum 24 VDC/4.2 A(b) Terminal: 2 sets for DC output with power I/O indicator(c) 2 terminal sets for power outputB. Pushbutton Switch(a) Spring return(b) Pushbutton switch with illuminated indicator(c) Including NC, NO contacts(d) Operation voltage: minimum 24 VDC(e) Max. current: 3 AC. Relay(a) 4 sets of NC, NO, COM contacts(b) With LED indicator(c) Operation voltage: minimum 24 VDC(d) Max. Current: 5 AD. Timing Relay(a) ON-Delay type(b) Operation voltage minimum 24 VDC(c) Max. Current: 5 A(d) Time delay: 0.05sec - 300 hour multi switch(e) 2 sets of NC, NO, COM contacts(f) With LED indicator Programmable Logic Controller Trainer(1) Functions:A. Input-simulation switches function as level and pulse Input for different input signalB. It is particularly suitable for installation of output relay helps to increase load currentC. Easy-to-use, Windows-based development softwareD. Assorted peripheral devices and other devices that support external extensions, it particularly suitsLaboratory experiment and project implementation.E. Various simulations I/O devices for studying and observing the resultsF. Using 4mm safety sockets on Input / Output terminals to ensure users' safetyG. The suitcase-design makes it easy to carry, move and store(2) AC adapter: Input AC 100240V, Output DC 24V(3) PLC main unit: SIEMENS SIMATIC S7-224 or others(4) Digital input: 14(5) Digital output: 10(6) Support high-speed counters : 6 (total)(7) Support timers : 256 total timers; 4 timers(1 ms); 16 timers(10ms); 236 timers(100ms)(8) Communication ports : RS-485 or USB(9) Module expansion port and DIO extension port(10) Traffic light control module(11) Tank-filling device module(12) 4-digit 7-segment display(13) 4-digit thumbwheel switch(14) Step motor(15) Encoder(16) 24V DC motor (17) Proximity sensor(18) Micro switch(19) Buzzer(20) 4x4 keypad(21) 24V DC expansion power(22) Windows-based programming software (STEP 7- Micro/ WIN) allows the user to modify the program while running it.(23) System RequirementsA. PC with Pentium It or better CPUB. Windows 98 / 2000 / XP / Vista / 7C. USB / PPI Multi-Master CableD. STEP 7- Micro/WIN software CD(24) AccessoriesA. Power CordB. Experiment ManualC. Connecting Leads Set Packaging & DeliveryPackage details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.Arrange delivery within 45 days upon receipt of payment.Please see below photo for detailed package. Company InformationWe supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today's and tomorrow's careers. ServiceWe supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.CertificateOur products takes ISO9001 product management system.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...