Digital Measuring Instrument Chinese Factory Component Counter 1-80mm Laser Diameter Gauge¹

Product Description Digital Measuring Instrument Chinese Factory Component Counter 1-80mm Laser Diameter Gauge Product Description1.Descriptionmeter counter is a special equipment used to measure the length of cables and other media. The tracked meter counter is dragged together after the measuring medium is clamped by the upper and lower tracks. The length of the crawler is the length of the measured medium. The length of the crawler track is the length of the pitch line that the crawler wheel turns, that is, the product of the crawler wheel pitch and the number of teeth. The encoder installed on the active crawler shaft measures the number of turns the crawler has turned. After conversion, the length of the medium can be obtained and recorded. The upper crawler is lifted up and down by the hand wheel and the screw rod, and the lower crawler is lifted up and down by the air cylinder. The lifting distance is determined by the outer diameter of the medium being measured.2.Feature159.15mm diameter meter wheelGravity compression systemCounter displayProduct Parameters1. Meter counting method: Meter-counting steel wheel drive2. Meter wheel parameters: 159.15mm diameter3. Meter range: 1-80mm4. Tolerance scope: 1‰5. Measuring speed: 200m/min6. Compression method: Gravity compression7. Display method: Mechanical counter8. Center height: Can provide parameter customization(Default one meter)9. Measurement method: Mechanical counter10. Incoming direction: Front and rear roller adjustment guide wire in and out11. Overall appearance ruler: 500* 360* 1200mmDetailed PhotosOther Related Product Certifications   

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.