Price Affordable SWaP-C 256x192/12μm Thermal Camera, Infrared Camera for Industrial Thermography¹

Product Description Product DescriptioniLC212 uncooled IR imaging module, also known as the uncooled thermal module, is radiometric-capable and has available infrared non-contact temperature measurement function. It includes an exceptionally small size 256x192 / 12μm wafer level package (WLP) infrared detector that captures long-wave infrared (LWIR) spectrum that ranges from 8 to 14μm.Compared with the same type thermal modules that have low resolution in the market, iLC212 has better image peformance due to its intelligent image processing algorithm, such as Non-uniformity Correction (NUC), 3D Noise Reduction (3DNR), 2D Noise Reduction (DNS), Dynamic Range Compression (DRC), Edge Enhancement (EE). What's more, the iLC212 thermal imaging module has temperature measurment with a range of -20oC~+150oC and support expansion and customization of temperature measurement range. Due to its fully optimized SWaP-C, the iLC212 thermal camera module has low resolution, small size, low power consumption and very low price. Thus, in the field of security and monitoring, it is very suitable for the wide angle and close range temperature measurement and monitoring. This cost effective iLC212 thermal module can be widely used in the Security Monitoring, Thermography, Wearable Devices, Vehicles, AIoT etc.  Main Features:- Fully Optimized SWaP-C Applications- Various Intelligent Imaging algorithms- Suitable for Various Infrared Products- Support Temperature Measurement- Low Power ConsumptionProduct Parameters ModeliLC212RiLC212R-PIR Detector PerformanceSensitive MaterialVanadium OxideResolution256×192Pixel Size12μmSpectral Response8μm~14μmTypical NETD≤45mKImage ProcessingFrame Rate25Hz/30HzStart-up Time3sDigital VideoRAW/YUV/BT656Image AlgorithmNon-uniformity Correction (NUC)3D Noise Reduction (3DNR)De-noise (DNS)Dynamic Range Compression (DRC)Edge Enhancement (EE)Image Display Black Hot/White Hot/Pseudo ColorPC SoftwareICC SoftwareModule Control and Video DisplayElectrical SpecificationsStandard External Interface30Pin_HRS: DF40C-30DP-0.4V(51), (HRS, Male)USB Expansion BoardType-CCommunication InterfaceTTL-RS232/USB2.0Digital Video InterfaceCMOS8/USB2.0Supply Voltage3.3V±0.1V VDCTypical Power Consumption0.7WTemperature MeasurementOperating Temperature Range-10oC~+50oCTemperature Measurement Range-20oC~+150oC; Support Customization and ExpansionTemperature Measurement AccuracyGreater of ±3oC/±3% (@23oC±3oC)Temperature Measurement Distance is 1.5mGreater of ±8oC/±8% (@23oC±3oC)Temperature Measurement Distance is 1.5mRegional Temperature MeasurementSupport Maximum, Minimum and Average Value of the Output Regional TemperatureSDKWindows / Linux/ARM; Achieve Video Stream Analysis and Conversion from Gray to TemperaturePhysical CharacteristicsDimension (mm)21×21×12.8 (With 3.2mm Lens)21×21×17.4 (With 3.2mm Lens)Weight8.6g±1g (With 3.2mm Lens)13g±1g (With 3.2mm Lens)Installation InterfaceM1.6x3.3; Two Interfaces / Surface; 2 Surfaces in TotalEnvironmental AdaptabilityOperating Temperature-40oC~+70oCStorage Temperature-45oC~+85oCHumidity5%~95%, non-condensingVibration5.35grms, 3 AxisShockHalf Sine Wave, 40g/11ms, 3 Axis, 6 DirectionCertificationROHS2.0/REACHOpticsOptional Lens3.2mm/F1.1; HFOV: 55.6±2.8°; Coating: AR; Fixed AthermalProtection Level/IP67 Rating Our Advantages Customer Reviews:Customers' praises are the affirmation of our profession and service.Company Profile Wuhan Global Sensor Technology Co., Ltd  is looking forward to be your reliable partner!Global Sensor Technology is the world leading infrared detector manufacturer and service provider. It is willing to provide customers all over the world with high performance uncooled and cooled thermal imaging detectors and share its professional application experience. Global Sensor Technology is located at Optics Valley, China. The company covers an area of 30 thousand square meters with 20 thousand square meters clean room settled for its three 8 inch fabrication lines. Thanks to the innovative and experienced staff, advanced fabrication facilities, and cutting-edge technique level, all key fabrication processes such as element purification, epitaxy growth, chip tape-out and fabrication, vacuum packaging can be done in house. The company successfully launched state-of-the-art VOx uncooled detectors, MCT and T2SL cooled detectors with full intellectual property. The product portfolio covers many different array formats, various pixel size and multiple spectral band combination, all products with high thermal sensitivity and reliability.GST IR detectors have been widely used in thermography, security & surveillance, personal vision, automotive and consumer infrared products. The volume production capability of GST enables it to meet the growing demand from all existing and emerging markets.  Certifications  FAQ 1.What is infrared thermal imaging?Infrared thermal imaging is a method of using infrared radiation and thermal energy to gather information about objects, in order to formulate images of them, or get temperature information of the objects, even in low visibility environments.2.What is thermography?Thermography is a non-invasive diagnostic method, based on object surface temperature detection. The infrared (IR) radiation emitted from an object is recorded and visualised in the form of a temperature distribution map. The infrared thermal image can be used to determine; structural defects, electrical faults, mechanical faults, physiological changes in people & animals, and much more.3.What is the advantage of infrared thermal imaging?---See through total darkness;---Identification under camouflage;---Long range detection;---Heat distribution detection;---Non-contact temperature measurement;---Occupation awareness4.What is infrared detector/thermal imaging sensor?Infrared waves cannot be seen with the human eye. Infrared detector/thermal imaging sensor is an optical-electrical device to react to infrared radiation and thermal energy and convert it into electrical signal and then output visible thermal images.5.What is the difference between uncooled and cooled IR detectors?There are currently two types of infrared thermal imaging sensors on the market, cooled and uncooled.Uncooled IR detectors operate at ambient temperature.  It is based on semi-conductor industry and thus usually can be fabricated in big volume with small size and low cost. Uncooled IR detectors are widely used in portable/handheld/mobile devices.Cooled IR detectors are packaged in a unit that keeps them at an extremely low temperature which shall be supported by a cyrocooler. They are much bigger, more expensive and less reliable than uncooled sensors, mainly due to the complex cooling systems they require. However, the cooled systems are incredibly sensitive and usually work with long focal length optics to achive long range mission.knowing the conditions in which the IR detectors will be used is crucial to making the right choice.6.What is thermal imaging module?A thermal imaging module usually consists of an infrared detector, infrared lens and hardware electronics with software and algorithm embeded. It is the minimum unit of a thermal imaging device.7.What is NETD?NETD referrs to "Noise Equivalent Temperature Difference". It is a measure for how well a thermal imaging detector is able to distinguish between very small differences in thermal radiation in the image. NETD is typically being expressed in milli-Kelvin (mK). Usually the lower the NETD figure is , the higher the thermal sensitivity indicates.8.What is SWaP3?SWaP3 refers to size, weight, power, performance and price. It indicates the technology trend of infrared industry.9.What is DRI?DRI usually refers detection, recognition and indentification distance of a thermal imaging system. It is a crutial parameter to judge the performance of the thermal imaging system. 10.What is WLP? What's the advantage of WLP?WLP refers to wafer level package. Together with metal package, ceramic package, they are the 3 main package formats of uncooled infrared detectors. Wafer level packaging (WLP) is the process of completing high vacuum packaging directly on the entire MEMS wafer, then scribing  and cutting to make a single infrared detector. WLP IR detectors are just designed to meet the miniaturization and low cost requirement in the application of infrared technology to consumer electronics market. Global Sensor Technology, with volume fabrication capability, is now offering a variety of WLP infrared module solutions to boost more new applications of emerging markets.11.What are the key considerations on an infrared detector/module for your application?---The detector resolution---The pixel size---The NETD---The image quality---The lens options---The power consumption---The size and weight---The mechanical & electrical interface---The budget

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.