CIPDB › China Industry › Instruments & Meters › Electronic Instrument
High Voltage Electroscope AC Transmission Line Wireless High Voltage Phase Detector1
Electronic InstrumentPhase DetectorWireless High Voltage Phase Detector
Weshine Electric Manufacturing Co., Ltd.
Preview:
Product Description Product DescriptionWeshine Electric High Voltage Electroscope AC Transmission Line Wireless High Voltage Phase DetectorWireless High Voltage Phase Detector is used to detect whether the two sides of the circuit breaker are in the same phase at the closed-loop point of the loop network or dual power network.The phase inspection operation must be carried out before closing the two power sources, otherwise short circuit may occur. The phase detector is suitable for the live detection phase operation of 6KV ~ 220KV transmission lines, and has the functions of high voltage electricity test and phase sequence verification. The Wireless High Voltage Phase Detector adopts wireless transmission technology, safe and reliable operation, easy to use, overcoming many shortcomings of wired nuclear phase device, in line with the national power safety equipment quality supervision and inspection standards.Compared with wired nuclear phaser, its main advantage is to remove the wire connecting the two ends of the power grid (power supply), the use is not limited by any terrain and facility structure, improved security. Working Principle:The Wireless High Voltage Phase Detector consists of X emitter, Y emitter and receiving host. Two detection transmitters can determine whether the line is live, and then send measured phase and frequency signals. The receiving host receives the signal from the two detection transmitters to determine whether the two lines are in the same phase. Safety Matters1. During the field test, the operator shall operate according to the safety distance standard of high voltage test of the power department.2, the standard configuration of insulation rod 3 meters, the corresponding voltage level is ≤ 220kV. If the line voltage is higher than 220KV, use an insulation rod with a length greater than 3 meters.3. When the inspection phase is operated, the hand-held position should not exceed the position of the insulation rod handle.Features:1. Under the running voltage, the wireless high voltage phase detector is approved by the high -voltage power line. It is a charging test tool. In particular, a high -frequency resistance test of the nuclear phase of the high voltage is directly exposed to high voltage. The results show that the insulation performance and safety distance can meet the requirements of the power industry safety regulations. In addition, because the nuclear phase sticks are equipped with discharge indicator pipes, when the nuclear phase stick end is disconnected from the nuclear surface connection, it can also ensure the safety of human and equipment.2. From the perspective of the voltage of both ends, the same name is 30 ° of phase -name phase voltage (such as a line that is transmitted for a long distance), although the adjustment of the R and R ′ resistance cannot fully balance the bridge. However, compared with the IG values measured by the other two phases, the difference between them is 2 to 3 times, and the different phases of the three phases can still be distinguished.3. After a long period of actual use of relevant departments, the instrument is generally reflected in the safety, reliability, and convenient use of the instrument, high -end resolution ability, and lightweight.4. After a certain high voltage check, the instrument can also be used for measurement of high voltage.Product ParametersBrand NameWeishineModel NumberVS-2600Display TypeDigital OnlyMeasuring Range0.1KV ~220KVAccuracy ClassHighSupply Voltage220VOperating Temperature-35oC~+45oCDimensions560mm*260mm*130mmWeight3KGProduct NameWireless high voltage nuclear phase instrumentPhase difference accuracyerror ≤5°Frequency accuracy±0.1HZMaximum transmission line-of-sight100 meterDisplay320*240Storage environment-40oC~+55oCHumidity≤95%RHPackaging & ShippingCompany ProfileOur Advantages1. The instrument has an automatic measurement function.2. The instrument has a perfect back-EMF protection function.3. The instrument uses a 5-inch 65K color LCD touch screen, which is easy to operate.4. The instrument has the characteristics of high precision, anti-interference, and shockproof.5. The longitudinal test of the DC resistance of the on-load tapping transformer can be completed with one power supply.6. The integrated design of the instrument host and the test line is easy to carry.Recommend Product
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...