CIPDB › China Industry › Instruments & Meters › Electronic Instrument
Miran Single Input High Precision Digital Instrument for Position Sensor1
Electronic InstrumentDigital IndicatorDigital Display Instruction
Shenzhen Miran Technology Co., Ltd.
Preview:
Product Description Products Description XSAEW Series(Single Input and High Precision) 1.Match resistance ruler, potentiometer.(replace original XSAE)2.Single 6-digit LED display, display range is -99999 ~ 999993.The stability of display and measurement is improved, and the ability of anti-electromagnetic interference and serial mode interference is improved.4.0.05%FS accuracy, the speed of measurement and control can be set 5 ~ 200 times per second, display range -99999 ~ 99999.5.Panel key and switch input setting function.6.10 point polyline correction function.7.Optional 1-4 point alarm output.It includes six basic alarm modes:Upper limit of measured value, lower limit of measured value, upper limit of deviation, lower limit of deviation, upper limit of deviation absolute value, lower limit of deviation absolute value, and four standby alarm modes:Upper and lower limit of standby deviation. (Standby alarm:When the instrument is energized, it does not give an alarm even if it is in the alarm area.When the measured value enters the no-alarm area, the standby condition is established, and then the alarm is normal) Basic OperationsPanel & Buttons (illustrated by the device with dimension 160×80)No.NameDescription1Main displayDisplaying the measured value (measuring mode)Displaying the parameter value (configuration mode)2Alarm output indicatorsIndicating the states of alarm points3Special function indicatorInvalid, only available for non-standard requirement4Set SETIn the measuring mode:Hold this button for over 2 seconds, and the system will enter the configuration mode.In the configuration mode:When a parameter symbol is displayed, hold this button for over 2 seconds to select next parameter category;When a parameter symbol is displayed, press this button to select next parameter;When modifying parameter value, press this button to save the changed parameter.5Left ?In the configuration mode:When a parameter symbol is displayed, press this button to display the parameter value;When modifying parameter value, press this button to select the digit to be revised.6Up ΔIn the measuring mode:Press this button to offset the measure value,preference value will be displayed (can be used to enable/disable data retention function during power-off);Hold this button for over 2 seconds to reset the measured value.In the configuration mode:When a parameter symbol is displayed, press this button to select the previous parameter (hold this button to select the first parameter of this category);When modifying parameter value, use this button to the increase the value.7Down ▽In the measuring mode:Hold this button for over 1 second to reset the peak-to-valley value to current gross value.In the configuration mode:When a parameter symbol is displayed, press this button to select the previous parameter (hold this button to select the first parameter of this category);When modifying parameter value, use this button to the decrease the value.SpecificationsBasic SpecificationsSpecificationRating/ConditionPower supply voltageAC100~240 V AC 50/60 HzAC/DC10~24V AC 50/60 Hz;10~24V DCPower consumptionAC<7 VAAC/DCAC:<6 VA;DC:<5WOperating voltage range90%~110% of rated supply voltageInsulation resistance≥100MΩ (Based on 500V DC MEGA)Insulation strength2000V AC (Testing condition:50/60Hz, 1 minute)Anti-interferenceIEC61000-4-2 (ESD), level IIIIEC61000-4-4 (Electrical fast transient burst), level IIIIEC61000-4-5 (surge), level IIIProtection levelIP65 (front protection panel) (GB/T42-2008)Ambient environmentTemperature-30~60oC (storage:-40~65oC)Humidity35~85 %R?H, no dew to condenseInstallationIndoor, altitude<2000mInput SpecificationsSpecificationRating/ConditionMeasure & control rates5/20/60/100/200 times/sIntrinsic error±0.05 %F?S at measure/control rate of 5 times/s(the faster the measure rate,the greater the intrinsic error)Display range-99999~99999;Resolution:1/100000Display specification6-digit LEDAnalog input typesSpecificationRangePotentiometerWResistance ranging between 0.5 kΩ and 100kΩSpecifications of Optional FunctionsSpecificationRating/ConditionAlarm outputSize 160×80T1~T4Relay output of alarm point 1 to 4;All SPDT contact relays250V AC/3AResistive loadSize 96×48T1~T2Relay output of alarm point 1 & 2;Both are SPDT contact relaysT3Relay output of alarm point 3, which is a SPST contact relayDigital inputK1Point 1 digital input(When K1 is selected, either the function of communication or retransmitted analog output is available.) Analog outputA1Current output (4-20)mA, (0-10) mA, (0-20) mAPhotoelectric isolation,Resolution:1/10000;Load:600ΩA2Voltage output (0-5)V, (1-5)VA3Voltage output (0-10)VCommunication interfaceS1RS232Photoelectric isolation,Response time:<500μS (tested);Software selectable protocol (TC-ASCII or Modbus-RTU)S2RS485Power supplyV0100~240V AC(50/60Hz)V110-24V AC 50/60 Hz;10-24V DC External Structure and DimensionsAll the dimensions are in mm. A.Hole Size for 160×80*125 :152×76C.Hole Size for 96×48×82 :92×45 External ConnectionsThe following figures illustrate the external connections of the devices with three different dimensions:Parameters ConfigurationCompany ProfileOur Industry ZoneShowing RoomOur Marketing TeamCertification Show Room and all kinds of CertificationWorkshopWarehouseTrade ShowMy Dear Friends, welcome to visit our company! Shenzhen Miran Technology Co., Ltd.Is the largest Linear Position Sensor manufacturer in China.Since 2003 we have been developed and produced Linear Position Sensor(brand:MIRAN, LinecSKI, WANSUNGM), Wire Rope Potentiometer, Magnetostrictive Liquid Level Sensor, Angle Sensor, Lubricating Pump(Oil/Grease/Butter), LVDT, Eddy Current Sensor, and many other Motion control products to support many different industries.Our Products have been widely used in injection molding machines, die casting machines, rubber machines, footwear machines, EVA injection machines, bottle blowing machines, woodworker machines, hydraulic machinery, level control, suspension stroke control, construciton machinery, seaport machinery, industrial robots, etc. We can offer you the competitive advantage products.We also support to put your logo on the products if you need.Please find the product you need and confirm the order.If you cannot find what you need, please leave a message with your email or Hope we can build up the long-term and harmonious business relationship!Wish you have a happy shopping and visit us again!
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...