CIPDB › China Industry › Instruments & Meters › Sensor
China Mv & Ma AC Current Clamp on Current Transformer 1000A1 Products Supplier or Manufacturer.
SensorClamp on Current TransformerClamp on CT
Beijing GFUVE Electronics Co., Ltd.
Preview:
Product Description MV & MA OUTPUT AC CURRENT CLAMP ON CURRENT TRANSFORMER S50 1000AThe round jaw design on the S50 Series AC current clamp on CT along with the high content nickel metal core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important from 10Hz to 10MHz. Measurement range is 1mA to 1200A. The S50 is a general purpose 1200A AC current clamp on CT designed for use with DMMs, power loggers and energy meter calibration instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The S50 clamp on CT has an integral 2.5m lead terminated. The rounded jaw design on this current clamp makes it well-suited for power applications where high accuracy 0.1% and low phase shift and wide frequency response are important. APPLICATIONSPower quality analyzer(PQA)power and harmonic metersPhase angle meterEnergy meter calibratorMeasuring around cable bundlesPower load monitoringData logging/recordingWaveform analysis(oscilloscopes meter) FEATURESMeasurement range of 1mA to 1200A ACImproved ergonomic design & easy operationHigh content permalloy coreFrequency 10Hz-10MHz BandwidthHolding wire diameter: φ52mmConforms to EN 61010, 600V CAT IIILow phase shift for power measurementDesigned for DMMs, recorders, loggers, oscilloscopes, power and harmonic metersUL, CE mark PARAMETERSElectrical parametersRatio1000: 1 , 2000:1, 1000:5 (customized)Accuracy class0.1%, 0.2%, 0.5%Primary current0 - 500A AC and 0-1000A ACSignal output1mV/A, 1mA/ASecondary voltage0 - 0.5V AC and 0 - 1V AC;Secondary current0-1A or 0-5A ACMax. Cont. Input current1200ALoad capacity≤4ΩOver voltage categoryCAT III 600VFrequency range10Hz-10MHzDielectric strength3KV 50Hz/60Hz at 1minuteTemperature range-40°C to +55°COutput2.5 meter cable with D01 or BNC connectorMax. voltage not insulated conductors600 VStandardEN 61010-1, EN 61010-2-032, IEC60044-1Installationclamp typeOutput modelead output(2.5m)Accuracy (1000A Range) 0-10A≤0.5%10-100≤0.2%10-1200A≤0.1%Phase Shift(1000A Range)0-10A≤0.5°10-100≤0.2°100-1200A≤0.1°Mechanical parametersDimensions (L x W x H) (mm)105 x 218 x 30Weight (g)650Holding wire diameter (mm)φ52Max. jaw opening (mm)52Jaw colorRed & GreyMaterialPC+ABS, UL94 V0photo
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...