CIPDB › China Industry › Chemicals › Adhesive
PU Foam Single Component Polyurethane Foam Adhesive Factory Direct Delivery PU Foam1
AdhesivePU FoamPolyurethane Foam
Hebei Zhenglong Yatai New Materials Technology Co., Ltd.
Preview:
Product DescriptionProduct DescriptionPU FOAMType/Purpose/Attribute Description: Door and Window Engineering Special EditionFEATURESType/Purpose/Attribute Description: Door and Window Engineering Special EditionProduct detailed introduction: This product is characterized by pre foaming, fast curing speed, strong adhesion, and is an economical and practical adhesive. It is also a green and environmentally friendly product, free of formaldehyde.SpecificationTECHNICAL SPECIFICATIONSProduct NamePU FoamKeywordsPolyurethane FoamChemical CompositionPolyurethane PolymerDensity10-30 Kg/M3Compressive Strength≥0.06MPaTensile Strength≥0.06 MPaElastic Modulus5-200 MPaElongation at Break100-600%Resilience45-65%Compression Set≤5%Operating Temperature-30°c ~ +80°cAcid ResistanceExcellentshear strength≥0.8MPaFoam ratio≥10methodsprayDetailed PhotosCompany Profile Hebei Zhenglong Yatai New Materials Technology Co., LTD. (hereinafter referred to as Zhenglong Yatai) is an innovative technology enterprise with rich capabilities in design and research and development, production and manufacturing, marketing and sales, and technical services, specializing in research and development, technical services, and technical consultation. The main products include adhesives, chemical products (excluding dangerous goods), building materials, decoration and renovation materials, window and door sealants, etc. High precision technology, strict management and perfect service are the foundation of the enterprise. Its business covers the whole country and the world. Since its establishment, the company has been strictly managed in accordance with the requirements of the quality management system, which has enabled the company to continuously grow and develop into a new star in the domestic industry.The company has a professional design and R&D team. In the course of its development, it has always taken technological leadership and the path of innovation as the premise of enterprise development, fully exerted its advantages, continuously developed and researched new products that meet market demands, thought what users think and acted on what users acted on, stayed ahead of market demands, based in China and looking to the international, and constantly strived for stronger, better and newer development.Looking ahead, Zhenglong Yatai is committed to developing and creating first-class products and providing sincere and enthusiastic first-class services to open a new chapter in the domestic industry.Instructions for using foamPrecautions for foam adhesive1,Shake the container up and down for 1 minute before use.2,Clean and moisten the construction surface before application.3,Spray from bottom to top, and spray up to 1/2 of the volume you need to fill.4,The foam begins to set in ten minutes. Wait 1 hour before proceeding to the next step.5. The foam that has solidified can be used to remove excess with a sharp knife. Then treat the surface with cement mortar, paint, or silicone.1. Do not expose to direct sunlight. This product is suitable for temperatures up to 35 ° C.2. There is pressure inside the tank. Avoid violent shaking during transportation.3. During construction, ensure good ventilation, keep away from fire sources, do not spray on hot surfaces, and do not smoke to avoid accidents.4. This product has strong stickiness when not cured. Protective equipment should be worn during operation. If the foam is not cured, it can be wiped off with polyurethane foam cleaner. If it is cured, it can only be handled by hand.5. Keep out of reach of children. In case the foaming agent gets into the eyes, rinse with clean water or follow medical advice; If it comes into contact with the skin, wash with soap or water.Company Qualification CertificationFAQQ1: Are you a factory or a trader?A: We are a manufacturer integrating industry and trade. Welcome to visit our company.Q2: Can I add my LOGO to the product?A: We support on-demand customization, including LOGO customization, color customization, appearance size customization, etc.Q3: What payment methods do you support?A: We support T/T, cash, etc. The details can be negotiated.Q4: What are your modes of transportation?A: We usually choose the appropriate mode of transportation (sea, air, land) according to the conditions of the goods, or we can choose the mode of transportation according to your requirements.Q5: How can I get an accurate quotation?A: You can first send your specific demand information and product pictures, and we will customize a solution for you according to your needs and inform you of the specific price.Q6:Can you send us samples?A:Yes, we are happy to provide you with trouble samples for your evaluation.(Sample shipping fee negotiable)Q7:What is the delivery time?A:If it comes with our logo, we can ship it within one week after receiving the deposit. If it is OEM service, it will be shipped within 15 to 20 days after receiving the deposit.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...