CIPDB › China Industry › Chemicals › Adhesive
PUR Hotmelt Glue Adhesive for Pet Laminate Film and MDF Board1
AdhesiveHot Melt Adhesive GlueHot Melt Adhesive
Jiaxing Zhengye New Material Co., Ltd.
Preview:
Product Description Jiaxing Zhengye New Material Co., Ltd. Product specification Item-No: T-1018A Product type: Moisture reactive polyurethane hot melt adhesive Physical properties: Appearance: Transparent little yellow Solid content: 100% Viscosity: about 3500 mPa.s @140oC about 4800 mPa.s @130oC about 7000 mPa.s @120oC about 10000 mPa.s @110oC about 14000 mPa.s @100oC Recommendations: The universal moisture-reactive hot melt adhesive has good adhesion to various materials including metal, plastic and glass. The type and surface treatment of each material is highly variable. It is recommended that appropriate and reasonable adhesion tests be performed before the test can be used in batches. Recommended operating conditions:Glue and fit with PUR special equipment. Recommended size: 110 - 130 oC T-1018A contains traces of organic isocyanate before it is reacted. If long-term excessive contact or inhalation of this chemical is likely to cause allergies to human body, it is not recommended to work in confined spaces. It should be handled and installed in a well-ventilated place. Appropriate pumping equipment. However, this safety concern does not exist after it is fully cured. In the bonding industry, if the relative humidity of the environment is less than 30%, the reaction curing time will be prolonged. At this time, it is considered to humidify the ambient humidity to improve the curing conditions. Clean Suggestions: The equipment can be cleaned with a PUR-specific cleaning agent. Operating Temperature:100-120oC Storage: This product is easy to cure with any moisture present, so it should be stored indoors and away from moisture. If any moisture contacts the product, it will cause the product to increase in viscosity and surface crust.Jiaxing Zhengye New Material Co., Ltd. Product specification Attentions: Since hot melt adhesives are required to be used at high temperatures, be sure to wear personal protective equipment. Use appropriate ventilation to remove fumes from heating the hot melt.Keep materials on a first-in, first-out basis. The product should be stored in a cool dry place to avoid exposure to the sun, rain, and fire. Temperature-viscosity curve: Temperature (oC) 100 110 120 130 140 viscosity (mPa.s) 14000 10000 7000 4800 3500The shelf life of this fully packaged product is 6months from the date of manufacture in a dry, cool 5 - 35 ° C storage environment.When storing, avoid direct sunlight, high humidity and high heat.Attentions; Do not mix with other hot melt adhesives to prevent handling and quality problems caused by the blend.Wear personal protective equipment and equipment to prevent burns caused by use under hightemperatures. Please install air exhaust equipment to remove smoke and steam generated by high heat.Please grasp the"advanced first use"principle to avoid product expiration.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...