Factory Price Moroxydine HCl/Moroxydine Hydrochloride CAS 3160-91-6¹

Product Description  Product Description1.Identification1.1GHS Product identifierProduct nameMoroxydine hydrochloride1.2Other means of identificationProduct number-Other namesMoroxydine hydrochloride1.3Recommended use of the chemical and restrictions on useIdentified usesFor industry use only.Uses advised againstno data available1.4Supplier's detailsCompanyJinan Fusen Bio-chemicals Co., Ltd.AddressNo. 1728, Second Ring East Road, Licheng, Jinan, Shandong, China.Telephone+86-531-89739798    1.5Emergency phone numberEmergency phone number+86-531-89739798Service hoursMonday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).2.Hazard identification2.1Classification of the substance or mixtureSkin irritation, Category 2Eye irritation, Category 22.2GHS label elements, including precautionary statementsPictogram(s) Signal wordWarningHazard statement(s)H315 Causes skin irritationH319 Causes eye irritationH410 Very toxic to aquatic life with long lasting effectsPrecautionary statement(s) PreventionP264 Wash hand, face thoroughly after handling.P280 Wear protective gloves/protective clothing/eye protection/face protection.ResponseP302+P352 IF ON SKIN: Wash with plenty of water/...P321 Specific treatment (see ... on this label).P332+P313 If skin irritation occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash it before reuse.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337+P313 If eye irritation persists: Get medical advice/attention.P391 Collect spillage.P501 Dispose of contents/container to ...the right place StoragenoneDisposalnone2.3 Other hazards which do not result in classificationnone3. Composition/information on ingredients3.1 SubstancesChemical nameCommon names and synonymsCAS numberEC numberConcentrationmoroxydine hydrochloridemoroxydine hydrochloride3160-91-6none≥98%4.First-aid measures4.1Description of necessary first-aid measuresGeneral adviceConsult a physician. Show this safety data sheet to the doctor in attendance.If inhaledIf breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.In case of skin contactWash off with soap and plenty of water. Consult a physician.In case of eye contactRinse thoroughly with plenty of water for at least 15 minutes and consult a physician.If swallowedNever give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.4.2Most important symptoms/effects, acute and delayedno data available4.3Indication of immediate medical attention and special treatment needed, if necessaryno data available5.Fire-fighting measures5.1Extinguishing mediaSuitable extinguishing mediaUse water spray, alcohol-resistant foam, dry chemical or carbon dioxide.5.2Specific hazards arising from the chemicalno data available5.3Special protective actions for fire-fightersWear self-contained breathing apparatus for firefighting if necessary.6.Accidental release measures6.1Personal precautions, protective equipment and emergency proceduresUse personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.6.2Environmental precautionsPrevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.6.3Methods and materials for containment and cleaning upPick up and arrange disposal. Sweep up and shovel. Keep in suitable, closed containers for disposal.7.Handling and storage7.1Precautions for safe handlingAvoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.7.2Conditions for safe storage, including any incompatibilitiesStore in cool place. Keep container tightly closed in a dry and well-ventilated place.8.Exposure controls/personal protection8.1Control parametersOccupational Exposure limit valuesno data availableBiological limit valuesno data available8.2Appropriate engineering controlsHandle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.8.3Individual protection measures, such as personal protective equipment (PPE)Eye/face protectionSafety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards. Skin protectionWear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Respiratory protectionWear dust mask when handling large quantities.Thermal hazardsno data available9.Physical and chemical propertiesPhysical stateCrystalline powderColourWhiteOdourNoneMelting point/ freezing point180 oCBoiling point or initial boiling point and boiling range327 oCFlammabilityNot flammable Lower and upper explosion limit / flammability limitNo data availableFlash pointNo data availableAuto-ignition temperatureNo data availableDecomposition temperature>327 oCpH5.5-8.5Kinematic viscosityNo data availableSolubility in water >31.1 μg/mlPartition coefficient n-octanol/water (log value)pH 2: -0.63; pH 7: -1.89; pH 10: -1.81 (98.5%)Vapour pressure1.85 x 10-3 PaDensity and/or relative density1.52 g/cm3Relative vapour densityNo data availableParticle characteristicsNo data available10.Stability and reactivity10.1Reactivityno data available10.2Chemical stabilityStable under recommended storage conditions.10.3Possibility of hazardous reactionsno data available10.4Conditions to avoidno data available10.5Incompatible materialsno data available10.6Hazardous decomposition productsno data available11.Toxicological informationAcute toxicityOral: Rat, LD50 >6250 mg/kgInhalation: Rat, LC50 >5.0 mg/l (4h)Dermal: Rat, intraperitoneal LD50 >1750 mg/kg; Rat, subcutaneous LD50 >2200 mg/kgSkin corrosion/irritationRabbit, cause skin irritation Serious eye damage/irritationRabbit, cause eye irritation Respiratory or skin sensitizationGuinea pigs, no skin sensitive Germ cell mutagenicityNoneCarcinogenicityNoneReproductive toxicityNoneSTOT-single exposureno data availableSTOT-repeated exposureno data availableAspiration hazardno data available12.Ecological information12.1ToxicityToxicity to fish: LC50 (96 h) Bluegill sunfish Lepomis macrochirus 0.045 mg/lToxicity to daphnia and other aquatic invertebrates: no data availableToxicity to algae: no data availableToxicity to microorganisms: no data available12.2Persistence and degradabilityno data available12.3Bioaccumulative potentialno data available12.4Mobility in soilno data available12.5Other adverse effectsno data available13.Disposal considerations13.1Disposal methodsProductThe material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.Contaminated packagingContainers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.14.Transport information14.1UN NumberADR/RID: UN3077IMDG: UN3077IATA: UN307714.2UN Proper Shipping NameADR/RID: Environmentally hazardous substance, solid, n.o.s.IMDG: Environmentally hazardous substance, solid, n.o.s.IATA: Environmentally hazardous substance, solid, n.o.s.14.3Transport hazard class(es)ADR/RID: 9IMDG: 9IATA: 914.4Packing group, if applicableADR/RID: 3IMDG: 3IATA: 314.5Environmental hazardsADR/RID: noIMDG: noIATA: no14.6Special precautions for userno data available15.Regulatory information15.1Safety, health and environmental regulations specific for the product in questionChemical nameCommon names and synonymsCAS numberEC numbermoroxydine hydrochloridemoroxydine hydrochloride3160-91-6noneEuropean Inventory of Existing Commercial Chemical Substances (EINECS)Not Listed.EC InventoryNot Listed.United States Toxic Substances Control Act (TSCA) InventoryNot Listed.China Catalog of Hazardous chemicals 2015Not Listed.New Zealand Inventory of Chemicals (NZIoC)Not Listed.Philippines Inventory of Chemicals and Chemical Substances (PICCS)Not Listed.Vietnam National Chemical InventoryNot Listed.Chinese Chemical Inventory of Existing Chemical Substances (China IECSC)Listed.16.Other informationInformation on revisionCreation DateAug 11, 2017Revision DateAug 11, 2017Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. We as supplier shall not be held liable for any damage resulting from handling or from contact with the above product. Product GalleryCompany ProfilePackaging & ShippingFAQQ1: How can I get the new price of a product?A: Please provide the exact or approximate quantity, packing details, destination port or special requirements, then we could give you the price accordingly.Q2: How can I get a sample?A: We can provide free samples for your test.Q3: How do you garantee the quality?A: First of all, our quality control will reduce the quality problem to near zero. When the production is finished, they'll take samples from every batch of cargo, and send to our lab for inspection. After passed the inspection, then we will arrange the delivery.Q4: How about your after-sale service ?A: If any technical or quality problem after you receive the cargo, you can contact us any time. If the problem caused by us, we will send you free goods for replacement or refund your loss.

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.