CIPDB › China Industry › Chemicals › Adhesive
Wood Working PUR Hot Melt Glue for Wrapping Machine1
AdhesiveHot Melt Adhesive GlueHot Melt Adhesive
Jiaxing Zhengye New Material Co., Ltd.
Preview:
Product Description Pur Hot Melt Glue For Wood Veneer Profile Wrapping Machine Wood Working Pur Hot Melt Glue For Wrapping Machine Item No: T-1120A Product type: Moisture reactive polyurethane hot melt adhesive Physical properties: Appearance: Milky white solid Solid content: 100% Viscosity: about 12000 mPa.s @160oC about 17000 mPa.s @150oC about 25000 mPa.s @140oC about 34000 mPa.s @130oC about 45000 mPa.s @120oC Suggested Applications: Mainly used for the coating of building materials and furniture profiled profiles. Such as: solid wood profiles, wood plastic, plastic steel, MDF and so on. Covered with PVC, CPL, veneer, paper, leather and so on. There are many variations in the types of materials and surface treatments. It is recommended that appropriate and reasonable adhesion tests be performed before they can be used in batches. Recommended operating conditions: Glue and fit with special equipment. Recommended operating temperature:120 - 140oC T-1120A contains trace amounts of organic isocyanate before it is reacted. If long-term excessive contact or inhalation of this chemical is likely to cause allergies to human body, it is not recommended to work in confined spaces. It should be handled and installed in a well-ventilated place. Appropriate pumping equipment. However, this safety concern does not exist after it is fully cured. In the bonding industry, if the relative humidity of the environment is less than 30%, the reaction curing time will be prolonged. At this time, it is considered to humidify the ambient humidity to improve the curing conditions. Cleaning advice: The rubber roller can be cleaned with a PUR-specific cleaning agent. Recommended operating temperature: 100-120oC Storage advice: This product is easy to cure with any moisture present, so it should be stored indoors and away from moisture. If any moisture contacts the product, it will cause the product to increase in viscosity and surface crust.Jiaxing Zhengye New Material Co.,Ltd Product Technical Instructions Precautions: 1.Since hot melt adhesives are required to be used at high temperatures, be sure to wear personal protective equipment. 2.Use appropriate ventilation to remove fumes from heating the hot melt. 3.Keep materials on a first-in, first-out basis. 4.The product should be stored in a cool dry place to avoid exposure to the sun, rain, and fire. Temperature-Viscosity Curing lines: Temperature (oC) 120 130 140 150 160 Viscosity (mPa.s) 45000 34000 25000 17000 12000The shelf life of this fully packaged product is 6months from the date of manufacture in a dry, cool 5 - 35 ° C storage environment.When storing, avoid direct sunlight, high humidity and high heat.Attentions; Do not mix with other hot melt adhesives to prevent handling and quality problems caused by the blend.Wear personal protective equipment and equipment to prevent burns caused by use under hightemperatures. Please install air exhaust equipment to remove smoke and steam generated by high heat.Please grasp the"advanced first use"principle to avoid product expiration.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...