CIPDB › China Industry › Chemicals › Fiberglass Products
AR fibreglass Mesh1
Fiberglass ProductsAR Glassfibre MeshFiberglass Mesh
HUIERJIE NEW MATERIAL TECHNOLOGY CO., LTD.
Preview:
Product Description Construction Material AR/ARG Glass Fibre Mesh Application:HUIERJIE AR GLASSFIBRE MAT is available in a range of nominal weight: standard is 150g/M2. It is produced by chopping Huierjie AR-Roving into 20-50mm strands and forming into a mat with a suitable binder. The mat has an open construction to permit penetration by cement mortar. The engineered binder, which dissolves with water further, assists incorporation into a cement matrix.(1) It is used for layout, coating or mechanical formed GRC.(2) It is used in roof waterproof and gypsum\marble\mosaic or board reinforcement.(3)Reinforced material of internal and external insulation system of wall. Especially for External Thermal Insulation Composite Systems (ETICS). It can reinforce wall and prevent cracks. It is an ideal engineering material in construction.HUIERJIE AR GLASSFIBRE MAT may be used as a positioned reinforcement flooring systemsAR MAT FOR GRCAR MESH FOR GRCARMC150-1000L(H)ARMC225-1000L(H)ARMC300-1000L(H)ARNP10*10-100L(H)-160G/M2ARNP5*5-100L(H)-160G/M2ARNP6*6-100L(H)- 270G/M2 MAT Technical DataEXAMPLE ARMC150-1000HType of glass Alkali Resistant (AR) Zirconia (ZrO2) content ≥16.7%Filament diameter (μm) 11+2 Strand tex 50+5Weight available(g/m2) 150 225 300 WIDTH(MM) 1000Sizing Content 9% Breaking strength(N/150MM) 37 MESH Technical DataEXAMPLE ARNP5*5-100-160G/M2]Type of glass Alkali Resistant (AR) Zirconia (ZrO2) content ≥16.7%Hole Distance(mm) 5 Weight available(g/m2) 145 160 270 WIDTH(MM) 1000WARP DIRECTION TENSILE STRENGTH (N/50mm) 1356 WEFT DIRECTION TENSILE STRENGTH (N/50mm) 1290 LATEX COATING Content 20% Strength Remained rate after soaked incement filtrate for 28 days ≥90%Breaking Elongation ≤5.0MAT Packing details: 100M2 /Roll /ctn,16ctns/pallet,20pallets/1*20'FCL. 32000m2. MESH Packing details: 50M2/Roll, 36rolls/pallet, 20pallets/1*20'FCL. 36000m2. Properties:Good stableness, Good cohesion with concret, High strength, elastic modulus up to 80.4Gpa, High alkali resistant, Strain breaking point: 2.4%StorageHuierjie AR Glassfibre mat & mesh pallet shall be stored dry in original packaging and advisable to stack in one layer, at a temperature between 15oC- 35oC & relative humidity between 35%- 65%.If stored below 15oC, it is advisable to hold in workshop for 24 hours to prevent condensation before use. Note: Huierjie AR Glassfibre mesh are manufactured in compliance with EN15422:2008, BSEN13496:2002 and ETAG 004. HUIERJIE AR GLASSFIBRE MESH is used by Manual laying or Mechanical molding to reinforce the areas which need mechanical strength to prevent crack.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...