CIPDB › China Industry › Chemicals › Fiberglass Products
Factory Price FRP Glass Fiber Winding Pipe GRP Pipe1
Fiberglass ProductsFRP PipeGRP Pipe
Hebei Aoliande Chemical Equipment Co., Ltd.
Preview:
Product Description What's FRP Pipe?Product DescriptionFRP pipe is a new kind of pipe material used for fluid transportation in recent years. It is a glass fiber with a resin-based weight that is wound layer by layer on a rotating core mold according to the process requirements, and quartz sand is evenly spread over the distance between the fibers as an interlayer, and are made by special winding processes. Its pipe wall structure is reasonable and advanced, which can give full play to the role of materials. Because of its excellent properties, it has been used extensively on the market. The reciprocal filament winding process has the advantages of high strength, reasonable jointing type, convenient installation, speedy test of the leakage test to the joint, it mainly be used for buried pipeline and long-distance transfer pipeline. Under the premise of satisfying the use strength, the steel degree is improved, and the stability and reliability of the product are guaranteed. Glass fiber reinforced plastic sand pipe is accepted by customers for its excellent chemical resistance, light weight and high strength, non-scaling, strong shock resistance, long service life compared with ordinary steel pipes, low comprehensive cost, fast installation, safety and reliability. FRP pipes are used in petroleum, chemical and drainage industries. China's glass fiber reinforced plastic pipe production has developed rapidly, the number has been increasing year by year, and the application scope and departments have become wider and wider.Production Process of FRP Pipe:The length-fixed winding process is controlled by computer. Manufacture the liner on the mandrel as the same process of fiber glass winding pipe, then after the resin became hardened, make the structure layer by winding according to the designed linearity and thickness, and add the mixture of mortar and resin into the structure layer, finally, wind the outer protection layer.The pipe is consisted of inner liner, interface, structural layer, and outer surface layer.Inner liner corrosive resistance layer, Surfaces exposed to the chemical environment shall be resin-rich and reinforced with a 10 or 20 mil thick chemical surfacing mat (E- glass).Interface layer is leakage proof layer, it be reinforced by minimum of three layers of 1.5 oz chopped strand mat.Structural layer will be reinforced by continuous strand fiberglass roving and shall maintain a resin content of 20-40%. It is reinforcement for the inner lining layer and interface, resisting the foreign load to the pipe body and ensures the strength and stiffness of the pipe body.The exterior surface shall consist of a chopped strand glass over which a resin-rich coating shall be applied.Characteristics of FRP Pipe:1) Lightweight, high strength and high stiffnessThe RPM pipe is composed of inner layer, wound layer, resin-mortar layer and exterior corrosion-resistant layer, its density is 1.7~2.1, equals one fifth of steel pipe, one fourth of cast steel pipe and three fourth of pretensioned concrete pipe. As the filament wound reinforced structure exists at the two sides of resin-mortar layer, and its fiber contedt is 70%, so it can meet the strength requirement of the pipeline. Else, as the resin-mortar layer is between the middle areas--lower stress area, so it has increased the stiffness meantine no any decrement to the strength of the pipe.2) Corrosion-resistant propertyThe corrosion-resistant property of RPM pipe is mainly relied on the inner resin, and be selected in accordance with the condition of the media. It is adopted the reinforced rich resin layer by fiberglass, the resin content is 80%, it can ensure that the RPM pipe prevent corrosion and leakage.3) Good hydraulic propertyThe inner surface of the RPM pipe is very smooth; the roughness coefficient is very small. Not only the inner surface of new produced pipe is very smooth, but also it is same smooth as the beginning after has been used many years, and no seaweed and other aquatic derivative be adhered. The water conservancy factor(C) can be kept within 140 and 150 during a long period.After the relative testing, its friction factor(f) is 0.0009 15, it is smaller than the (f=0.00232) and the steel pipe (SP)(f=0.0O 179).It can decrease the pressure head loss obviously; capacity above 20%. So when the conveying the increase conveying capacity 1S same, can adopt the RPM pipe with lower diameter, can save the investment of the project. The conveying capacity comparison can see the following Table and Diagram.Product ParametersDiameter DN15-4000mmLength6m/12m per piecePressure 0.1MPa, 0.6MPa , 1.0MPa , 1.6MPa Stiffness 2,500 Pa, 5,000Pa, 10,000Pa Detailed PhotosCompany ProfileFAQ1. Q: Who are we?A: We are manufacturer, located Hengshui City Hebei Province, China, start from 2016, sell to Eastern Europe(20.00%), Africa(20.00%),Domestic Market(20.00%),South Asia(15.00%),Southeast Asia(15.00%),South America(5.00%),North America(5.00%). Welcome to send your inquiry!2. Q: How about the delivery time?A: Normally, 10-15 days after receiving the deposit to finish the order for a 20' container. Welcome to ask for the detailed delivery time according to your order quantity!3. Q: What's the price of FRP pipe?A: Depends on the size and quantity, welcome to inquire!4. Q: How can you guarantee the product quality?A: We have the quality control system ISO9001:2015, and it's been followed strictly. We also have the professional QC team, and each our package worker will be in charge of the final inspection according to the QC instruction beforepacking.5. Q: Can you do OEM for me?A: We accept all OEM orders, just contact us and give me your design,we will offer you a reasonable price ASAP.6. Q: What can you buy from us?A: FRP/GRP Pipe & fittings, FRP/GRP tank & tower, FRP grating, FRP pultruded profiles, FRP SMC water tank, FRP polymer electrolytic cell, S/F, F/F double wall underground fuel tank, FRP rebar, FRP pipe filament winding machine & technology, FRP tank filament winding machine & technology, FRP molded grating machine & technology, FRP rebar machine & technology, FRP pultrusion machine, FRP polymer electroytic cell machine & technology, Mannheim Process Potassium Sulphate Making Equipment & technology, FRP cable tray, FRP septic tank, Fiber reinforced plastic rod/core, etc,7. Q: What services can we provide?A: Accepted Delivery Terms: FOB, CFR, CIF, EXW, FAS, CIP, FCA, CPT, DEQ, DDP, DDU, Express Delivery, DAF, DES;Accepted Payment Currency: USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;Accepted Payment Type: T/T,L/C,D/P D/A, MoneyGram, Credit Card, PayPal, Western Union, Cash, Escrow;Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...