IPDB › China Industry › Tools & Hardware › Abrasive & Grinding
8mm Shank Grinding Cup for Steel Removal1
Abrasive Grinding, Grinding Wheel, Grinding Cups, Grinding Pins
Xiamen Bestlink Factory Co., Ltd.
Preview:
Product Description Button bits grinding pin & cups from 7mm to 25mmXiamen Bestlink factory design and produce the BTON200,BTON500 and Pneumatic Robot Arm AGM18 etc. pneunatic buttong bits grinding machine.A full spares back-up service is also available. Also produce the grinding pins/cups, available with a choice of Hemispherical, Ballistic Semi Ballistic, Paraboloid or Conical pins, in sizes 7mm to 25mm.Other sizes available on request.PREVENTION MEASURES AND INSTRUSTIONS FOR MACHINES OPERATORSBEFORE USE:Check that the machine is stable and that the grinder is correctly and tightly fitted to the machine.Check the integrity of the guards protecting parts in motion.DURING USE:Report immediately any inappropriate functioning or dangerous situations;The operator's position needs to be such as not to be in contact with the parts in movement;Do not remove or modify protection devices;Do not intervene on mobile parts during the functioning of the machine;Do not get distracted.AFTER USE:Correctly position the machine without leaving the tool suspended;Carry out the review and maintenance operations needed to reuse the machine with the power supply disconnected;In the maintenance operations comply with the indications of this manual;Clean the machine.Diamond Grinding Cups1.Wing (shoulder) drive grinding cup for, with a 8mm diameter shaft(shank) and one O-ring. Suitable for Atlas Copco LSD machines, Jasco, Dorey and KING PIN grinding machine.2.San drive grinding cup, with a 9mm diameter shaft(shank), suitable for all SANDVIK grinding machines.3.55 drive grinding cup is for all Atlas grinding machines.4.Internal hex drive grinding cup is for all CME grinding machines.ItemSize(mm)For button sharpening6/7/8/9/10/11/12/13/14/15/16/17/18/19/20/21/22/23/24/25For steel removing7-8, 9-10, 11-12, 13-14, 15-16, 17-18, 19-20ProfileSemi-ballistic/Hemi-sphericalAll series button bit grinding machine.1.Hand-held button bit grinder BTON200Machine ModelBTON200Air pressure, max5-7 bar (100psi)Air consumption2m3/min (50ft3/min) Rate power1.5kwIdling speed20,000 rpmWater flushingpresuure, max4 bar (60psi)Hose diameter, air19 mm(1/2″)Hose diameter, water4mm Weight, exclude hoses3.2 kgSound level80 dBGrinding button sizeΦ7-25 mm 2.Semi-automatic Button Bit Grinder BTON500Machine ModelBTON500Rotation speed:20000 rpmMotor: Pneumatic (air powered) Work pressure: 5-7 bar (100 psi)Max. air pressure: 8 bar (115 psi)Air consumption: 2.0 m3 / min (80ft3/min)Max. water pressure: 4 bar (60 psi)Air hose diameter: 19 mm Water hose diameter: 6 mmWeight excl. packaging:120 Kg Weight incl. packaging: 130 Kg Packing dimensions: 500*500*1400mmSound level:92 dB(A)3.Pneumatic Robot Arm Grinder - AGM18Machine ModelAGM18Rotation speed:20000 rpmMotor: Pneumatic (air powered) Work pressure: 5-7 bar (100 psi)Max. air pressure: 8 bar (115 psi)Air consumption: 2.0 m3 / min (80ft3/min)Max. water pressure: 4 bar (60 psi)Air hose diameter: 19 mm Water hose diameter: 6 mmWeight excl. packaging:330 Kg Weight incl. packaging: 350 Kg Packing dimensions: 1600*700*1500mmSound level:92 dB(A)Before griding & after grinding.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.