CIPDB › China Industry › Chemicals › Inorganic Salt
Polyaluminium Chloride PAC Water Treatment at Factory Price1
Inorganic SaltPACPolyaluminium Chloride
Hubei Haite New Material Co., Ltd.
Preview:
Product DescriptionPacking & DeliveryPackage SpecificationPolyaluminium Chloride Packing:1, HTPA-01 PAC(Polyaluminum Chloride) will be packed in N.W25kgs plastic woven bag within PE liner. 19Tons will be loaded in 1*20'fcl container.2, HTPA-01 PAC(Polyaluminum Chloride) shall be sealed and stored in the dry and ventilated place to prevent it from rain, high temperature and strong sunlight .The shelf life of product is 24 months.Company ProfileHubei HAITE New Materials Co., LtdHeadquarters of Hubei HAITE New Materials Co., Ltd., is located in YUEKOU Industrial park, covering an area of about 27973 square meters and has a building area of 11000 square meters. HAITE has been engaged in R&D and sales of decolorizing agents, salt lake lithium extraction adsorbents and water-based coatings.HAITE decolorizing agent is not only applied to the decolorization treatment of high chromaticity wastewater in dye factories, treatment of active, acidic, and dispersed dye wastewater is applied, but also It can be used for the treatment of textile and printing wastewater, as well as industrial wastewater such as pigments, inks, papermaking, food, chemical, aquaculture, and brewing.HAITE Salt lake lithium adsorbent is used for the extraction of lithium ions from salt lake brine.HAITE Special water-based industrial coatings are mainly used for silicon steel coatings, motor insulation paints, and some special industrial coatings.HAITE has been dedicated to provide high efficient and low carrying capacity of the environmental load wastewater treatment agents, that covering key process such as wastewater decolorization, heavy metal removal,COD, nitrogen degradation and sludge dewatering, service also include helping customers achieve their wastewater discharge compliance and resource recycling goals.Hubei HAITE New Materials Co., Ltd. provides customers with salt lake lithium extraction adsorbents with high adsorption rate and low dissolution loss. Hubei HAITE New Material Co., Ltd. provides customers with various water-based epoxy lotion and coatings, and can also provide according to customer special order. Hubei HAITE New Materials Co., Ltd. have been taken customer needs as its responsibility and provides high-quality products and services to customers.1. PAC(Polyaluminium Chloride) color depend on its Alumina content, high purity is white/light yellow(Alumina≥30%); Medium purity is Golden yellow (30%≥Alumina≥28%);The color of our PAC(Polyaluminium Chloride) is white and yellow;2.The purity is high, and the indicators have reached the international advanced level.3. Basicity: 40.0%~90.0%4. Water insoluble %≤1.5 5. PH(1% aqueous solution):3.5~5.0Polyaluminium Chloride (PAC Industrial grade)Poly-aluminum chloride is a new type of high-efficiency inorganic polymer coagulant, which is widely used in industrial water purification, industrial wastewater and urban sewage treatment.Product Performance1.The cost of water treatment is 20%~80% lower than other inorganic coagulants;2. Quickly form flocculants, alum flowers are large and sinking fast;3. Adapt to waste water at various temperatures and good solubility;4.Liquid products can be suitable for automatic dosing, less corrosive, convenient operation, and do not block pipes even using long time. Usage method and precautions: 1. Solid PAC (Polyaluminum Chloride) should be dissolved in water, and the dilution ratio is generally 2%~20% for solid products and 5%~50% for liquid products (in terms of weight percentage); Liquid products can be added directly or diluted with water.2. The dosage of the polyaluminum chloride agent is: 3~40 g/ton for liquid products and 1~15 g/ton for solid products, and the specific dosage is determined by the stirring test and productivity test.3. Our PAC (Polyaluminum Chloride) cannot be mixed with other chemicals;4. The storage period of liquid products is half a year, and the storage period of solid products is one year, which should be placed in a ventilated and dry place, and the use effect will not be affected after being wet.The main product we have been providing as follows:-- HTD series is Water Decoloring Agent , for color removal for dyeing wastewater treatment and for other wastewater;-- Polyaluminium Chloride(PAC,HTPA), for drinking water treatment for wastewater treatment;-- Anionic Polyacrylamide (PAM, HTPM), for drinking water treatment for wastewater treatment;-- PHPA(Partially Hydrolyzed Polyacrylamide) For Drilling , for drilling mud additive in the oilfield;--PolyDADMAC(HTPD), for wastewater treatment ,paper making and textile mills.-- Aluminum-based adsorbents for Lithium Extraction from Salt Lakes, white color;-- Salica sol, for coating and surface treatment, Textile mill and paper making,? New Energy Sources? and Environmental Conservation?;-- Color fixing agent, for textile dyeing;-- Becterial, for petrochemical, sugar production, beverage and alcohol industries.-- Inorganic saltFAQQ1: Are you manufacturer or trading factory?A: We are the factory 8 years, can supply many products such as PAC (Polyaluminium Chloride), PAM, water decoloring, Water base coating etc.,Q2: What is Polyalminium Chloride used for?A: PAC (Polyaluminium Chloride) is used primarily as a coagulant/flocculant in municipal drinking water and wastewater treatment,industrial effluent clarification (textile, pulp&paper, petrochemical, mining), sludge conditionig and dewatering, cooling tower make-up water and RO pre-treatment and dyehouse effluent color removal. Q3: Can you accept to supply the free sample?A: Yes, of course we are glad to supply the free sample, and you need in charge of the freight costQ4: What's your products' advantages?A. Good quality and competitive prices.B Strictly quality control when producing.C. Professional team work, from design, development, producing,assemble,packing and shipping.D. Experience for shipping the PAC (Polyaluminium Chloride) to different countries. Q5:Can we visit your factory?A: You are warmly welcomed to visit our factory, it would be our great pleasure! Q6. What's are your payment term?A: We can accept the TT, Western Uniono, LC, Credit card, Alipay and others please contact with us freely. Q7: If I do not know which product to choose, what shall I do? A: Please no need to worried about this, we have the professional engineer and experienced sales, can give you the suggestion. Q8: If the OEM is accepted? A: Yes, OEM is welcome. We also can do your own logo and package.A: Email your order ID and issue We'll respond within 24 hours.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...