Wanhua HD03: Premium Acrylic Material for Versatile Use Polymethyl Methacrylate¹

Product Description Product DescriptionACRYPLAS? HD03Features: Excellent transparency, Outstanding outdoor durability, Good scratch resistanceUses: General purposeAppearance: Clear/ transparentForms: PelletsProcessing Method: Injection molding, Extrusion Product ParametersProperties  Property NameValueUnitAppearanceColourless--Physical StateSolid--Relative density (water = 1)1.19--Decomposition Temperature>280--Melting point/freezing point60-100°CSolubility in WaterImmiscible--Specifications  Specification NameValueUnitTest MethodTest ConditionMelt flow rate at 230 °C/3.8 Kg3g/10minISO 1133--Shrinkage0.2 - 0.6%ISO 294--Water absorption at 24hr0.3%ISO 62--Density1.19g/cm3ISO 1183--Tensile strength at 5 mm/min77MPaISO 527--Tensile Modulus at 1 mm/min3300MPa----Elongation at 5 mm/min6%----Flexural Strength at 2 mm/min135MPaISO 178--Flexural Modulus at 2 mm/min--MPa----Charpy impact strength at 1eU unnotched20KJ/m2ISO 179--Charpy impact strength at 1eA notched1.4KJ/m2----Vicat softening temperature at B50107°CISO 306--Heat distortion temperature at 1.8MPa102°CISO 75--Thermal expansion coefficient6 x 10^-51/°CISO 11359--Transmittance at 3mm92%ISO 13468--Haze at 3 mm< 0.5%ISO 14782--Refractive Index1.49--ISO 489--Flame Rating 1.5 mm/3.0 mmHBClassUL94--Surface resistivity>10^16ΩASTM D 527--Volume Resistivity>10^13Ω.m----Dielectric strength at 4 kv/sec--kV/mmASTM D 149--Dielectric constant at 60 Hz3.7--ASTM D 150--Drying Temperature80 - 90°C----Drying Time3 - 4h----Injection Temperature220 - 260°C----Mold temperature50 - 90°C---- ApplicationsCompany ProfileHoskimi Technology (Shanghai) Co., Ltd. Was established in 2010 and is located in Shanghai Hongqiao West Business District. It provides customers with timely technical service support, diversified multi-brand material supply, and optimal material selection suggestions and combinations. It has modern warehousing services and is committed to providing customers with the best cost-effective solutions and stable & reliable supply resources.Plowing in the automotive industry for 14 years, has a wealth of experience in the automotive industry development and after-sales service, with Mercedes-Benz, BMW, Tesla, SAIC and other major automotive OEMs and Tier 1 Glammer, Xinquan, Changzhou Interior and other close cooperation, in the project there are many successful cases, such as SAIC RX5, SAIC MG SUV, SAIC Audi A7, Lixiang L6, Mercedes-Benz C. Class, SAIC Motor General Motors and etc.Packaging & Shipping FAQQ: Where is your company based?A:Our company located in Room 501, 5/F, Xin'ao Business Building, No. 720 Huajiang Road, Jiading District, Shanghai, China.Q:What can you buy from us?A: PC, PC/ABS, Polymethyl methacrylate, ABS, PA, POM, TPE, TPV and Etc.Q:Can we get your samples?A:Yes! Samples can be arranged for those available products. The Delivery Fee will be on buyer's account.Q:What are your terms of payment?A:T/T, L/C,. Option A:30% pay in advance, 70% before shippingQ: What is your packing?A:Basically our packing is in 25/KG bags.Q:Where is the loading port?A:Usually Shanghai.Q:What is the normal lead time?A:  We will send goods to departure port within 5-10 workdays after we receive your payment.Q:If any quality problem, how can you settle it for us?A: When discharging the container, you need to inspect all the goods. If any breakage or defect products were found, you MUST take the pictures from the original carton. All the claims must be presented within 7 working days after discharging the container. This date is subject the arrival time of container. We will advise you to certify the claim by third party, or we can accept the claim from the samples or pictures you present, discharging of the container is not included. Finally we will completely compensate all your loss.

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.