CIPDB › China Industry › Chemicals › Paint & Coating
High Quality Pure Polyurea Waterproof Coating1
Paint CoatingPolyureaWaterproof Coating
SWD NEW MATERIAL (SHANGHAI) CO., LTD.
Preview:
Product Description STWD900 is a 100% solid content aromatic polyurea elastomer. It has excellent waterproof anticorrosion and abrasion resistance property which has been widely applied in the industrial and commercial filed for the anticorrosion waterproof protection.Product Parameters*Solvent free, 100% solids, safe, environmentally friendly and odor free.*Rapid cure, can be sprayed forming on any bent, slope and vertical surfaces without sagging.*Dense coating, seamless, with good flexibility.*High adhesive strength, fast bonding well on steel, concrete, wood, glass fibers and other substrates.*Excellent impact resistance, abrasion resistance*Excellent anticorrosion and chemical resistance to acids, alkali, salts etc.*Excellent waterproof performance*Good shock absorbing performance*Excellent resistance to temperature variation*Fast cure, application site back to service quickly*Excellent durability to reduce maintenance cost for lifelong*Extend the service life of sprayed structureProducts informationItemPart APart BAppearancePale yellow liquidAdjustable colorSpecific gravity (g/m3) 1.121.05Viscosity(cps)@25oC800650Solid content (%) 100100Mix ratio(by volume) 11Gel time (second)@25oC4-6Surface dry time(second)15-40Theoretical coverage (dft)1.08kg/m2 film thickness:1mmPhysical properties of productsItemTest standard ResultHardness (Shore A)ASTM D-224092Elongation rate(%)ASTM D-412460Tensile strength(Mpa)ASTM D-41217Tear strength (kN/m)ASTM D-62468Impermeability(0.3Mpa/30min)HG/T 3831-2006impermeableWearable(750g/500r)/mgHG/T 3831-20064.5Adhesive strength(Mpa)concrete baseHG/T 3831-20063.1Adhesive strength(Mpa) steel baseHG/T 3831-200611Density(g/cm3)GB/T 6750-20071.02Cathodic disbondment [1.5v,(65±5)oC,48h]HG/T 3831-2006≤15mmProduct corrosion mediumAcid resistance 10%H2SO4 or 10%HCI,30dNo rust, no bubbles, no peel offAlkali resistance 10% NaOH, 30dNo rust, no bubbles, no peel offSalt resistance 30g/L,30dNo rust, no bubbles, no peel offSalt spray resistance, 2000h No rust, no bubbles, no peel offOil resistance 0# die sel, crude,30dNo rust, no bubbles, no peel off(For reference: the above data is acquired based on GB / T9274-1988 test standard. Pay attention to the influence of ventilation, splash and spillage. Independent immersion testing is recommended if requires other specific data)Product application environmentEnvironment temperature0oC-45oCProduct spray heating temperature65oC-70°Chose heating temperature55oC-65oCRelative humidity≤90%Dew point≥3oCApplication guideRecommend spray machineGRA CO H-XP3 Polyurea spray equipmentSpray gunFusion-air purge or mechanical purgeStatic pressure2300-2500psiDynamic pressure2000-2200psi Recommend film thickness 1000-3000μmRecoating interval≤6hApplication noteAgitate part B uniform prior to application, thoroughly mix the deposited pigments, or the product's quality will be affected.Spray polyurea within the proper time if the substrate surface is primed. For the application method and interval time of STWD polyurea speical primer please refer to STWD company's other brochure.Always apply STWD900 on a small area before large application to check the mix ratio, color and spray effect are correct. For detailed information of application please refer to the latest instruction sheet of the application instructions of STWD spray polyurea series.Product curing timeSubstrate temperatureDry Foot traffic Solid dry+10oC30s 45min7d+20oC23s 15min6d+30oC17s 5min5dNote: the curing time varies with the environment condition especially the temperature and relative humidity.Shelf Life * From the manufacturer date and on original package sealed condition:Part A: 10 monthsPart B: 10 months*storage temperature:+5-35°C Packing: Part A 210kg/drum, part B 200kg/drumMake sure the product package sealed well* store in cool and ventilated place, avoid direct sunshine exposure.Product health and safety information For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.Integrity declaration STWD guarantees all technical data stated in this sheet are based on laboratory tests. Actual testing methods may vary due to different circumstances. Therefore please test and verify its applicability. STWD does not take any other responsibilities except the product quality and reserve the right of any modifications on the listed data without prior notice.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...