CIPDB › China Industry › Chemicals › Plastic & Polymer
China, Chinese Derakane Corrosion Resistance 470-300 Vinyl Ester Resin Polyester Resin for High Temperature Chlorination or Caustic Scrubbing and Storage, Waste Treatment1 Industrial Products Supplier Manufacturer Details, price list catalog:
China Products Details Supplier Manufacturer price list catalog
Plastic PolymerWaste TreatmentPolyester ResinVinyl Ester Resin
Evergreen Chemicals Co., Ltd.
Preview:
Product Description Derakane Momentum Vinyl Ester Resin Corrosion Resistance 470-300 Product Description DERAKANE MOMENTUM 470-300 resin is a novolac-based vinyl ester designed to provide exceptional mechanical properties at higher temperatures. This resin offers a high resistance to solvents and chemicals, good retention of strength and toughness at elevated temperatures, and excellent resistance to acidic oxidizing environments. DERAKANE MOMENTUM resins are a new generation of resins that can be used to improve fabrication efficiency and product quality. Their lighter color makes defects easier to see and correct while the resin is still workable. The longer stability provies additional flexibility to fabricators in storage and handling. DERAKANE MOMENTUM 470-300 resin offers an economical alternative to exotic alloys by allowing the use of lower-cost FRP over traditional materials. This resin resists solvents, chemicals, and acidic oxidizing environments to provide long lasting, reliable equipment for corrosive materials (please contact us before using thixotropic agents and fillers. Addition of thixotropic agents and fillers can compromise corrosion resistance). DERAKANE MOMENTUM 470-300 resin retains strength and toughness at elevated temperatures which enables users to operate the equipment in a variety of applications. It contains only 33 weight percent styrene, resulting in reduced styrene emissions and allows fabricators to meet California's South Coast Air Quality Management District Rule 1162. Note: Contact us before using thixotropic agents and fillers. Addition of thixotropic agents and fillers can compromise corrosion resistance. APPLICATIONS AND USEDERAKANE MOMENTUM 470-300 resin is suitable for applications involving high temperature chlorination or caustic scrubbing and storage, industrial waste treatment facilities and solvent extraction processes used in mining. It is also used for acid transport, tank, truck and railcar linings, and gasohol storage. DERAKANE MOMENTUM 470-300 is recommended for most commercial FRP fabrication processes including hand lay-up, spray-up, pultrusion and resin transfer molding. The higher viscosity of MOMENTUM DERAKANE 470-300 resin facilitates filament winding and contact molding applications. DERAKANE 470HT-400 resin can be used for even higher temperature applications. storageIt is highly recommended that all material is stored at stable temperatures below 25°C (77°F).Avoid exposure to heat sources such as direct sunlight or steam pipes. To avoid contamination of product with water, do not store outdoors. Keep sealed to prevent moisture pick-up and monomer loss. Mildmixing is recommended after prolonged storage. Rotate stock. Product ParametersTYPICAL LIQUID RESIN PROPERTIETypical properties(1) of a postcured 6 mm (1/4") laminate(10) at 25°C (77°F).Tensile Strength130 MPaISO 52719,000 psiASTM D3039Tensile Modulus12,000 MPaISO 5271700 kpsiASTM D3039Flexural Strength210 MPaISO 17830,000 psiASTM D790Flexural Modulus8500 MPaISO 1781200 kpsiASTM D790Glass Content40%ISO 117240%ASTM D2584Typical properties(1) of a cured casting(8) at 25°C (77°F).Tensile Strength85 MPaISO 52712,500 psiASTM D638Tensile Modulus3600 MPaISO 5275.2 x 105 psiASTM D638Tensile Elongation at Yield3-4%ISO 5273-4%ASTM D638Flexural Strength130 MPaISO 17819,000 psiASTM D790Flexural Modulus3800 MPaISO 1785.5 x 105 psiASTM D790Density1.17 g/cm3ISO 1183 ASTM D792Volume Shrinkage8.3% 8.3% Heat Distortion Temperature(9)150°CISO 75300°FASTM D648Glass Transition Temperature, Tg2165°CISO 11357330°FASTM D3418Barcol Hardness40EN 5940ASTM D258315 +/- 5 minutes1.500.2530 +/- 10 minutes1.500.1260 +/- 15 minutes1.500.07Geltime at 20°C (68°F)Trigonox 239A (phr)Cobalt6% (phr)15 +/- 5 minutes1.250.2030 +/- 10 minutes1.000.1060 +/- 15 minutes1.000.06Geltime at 25°C (77°F)Trigonox 239A(phr)Cobalt6% (phr)2,4-P (phr)15 +/- 5 minutes1.00 0.15---30 +/- 10 minutes1.00 0.07---60 +/- 15 minutes1.00 0.050.01Application Our AdvantagesWhy Choose Us?1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.3.Corporate With World Famous Brand, Quality Assured, Cost Effective .4.Professional And Strong Technical Support.5.Full Line Nouryon Brand Peroxides6.Hot Chemicals, Short Of Supply Chemicals, We Have .7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container. Production Process Company ProfileEvergreen Chemicals is a leading manufacturer and supplier of chemical composite materials in China. We've been and kept leading roles in this industry for more than 20 years, serving 8000+ customers all over the world from more than 25 fields. Our company is located in Jiangyin, half an hour to Shanghai by train, enjoying convenient transportation access.We are specialized in researching, producing and distributing resin materials and its auxiliaries with premium quality. Our main products are unsaturated polyester resin, epoxy resin, vinyl resin and organic peroxides. In addition to market our own products, we are also the distributor of some global brands like NUORYON, SWANCOR, AOC, INOES etc. Besides, auxiliaries like curing agent, accelerator, and initiator are also available here to customers. Our products are widely used in the fields of automobiles, tent poles, cooling towers, pipes, FRP, artificial stones, handicrafts, and resin manhole covers.CertificationsFAQ
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...